Show your slip joint's thread!
-
@2xTap said:
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.2xTap
Interesting... I was going to mention that the scales in the pic Zed posted above looked mottled, but I thought it might just be reflection or something.
Who manufactures the Colt line?
-
NutSAK,
I didn't notice it but now that you mentioned it I went back and looked at the pic and it sure does show some different coloring in the one section, a darker splotch just right of the shield. Some do come this way, not all, but some do.
As to the new Colt line of slippies. The license is now held by Smoky Mountain Knife Works, and the manufacturers they use over in China to build their Rough Rider line are the same ones building the Colt line for them.
2xTap
-
But the one thing about their composition handles is the color isn't always consistant throughout. You might see some slight variation in the yellow throughout the handle material. One of mine is like this. It's not splotchy but the color fades to lighter shades in some areas. And if you get to liking the RR's and plan to get some more I highly recommend looking at their Amber Jigged Bone line, the bone on these is real nice.
2xTap
[/quote]I noticed that on one of my RR's, the Barlow I got last week. There are a few brown, vein-like lines in some areas of one of the scales. Doesn't affect the knife one bit, and this one is a pure user, not for show. I'm loving it either way, it's been in my pocket daily. I'm thinking about one or two or five of the Amber Bone ones.....
-
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?
Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
-
@dks said:
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
thanks for the info ill check its build when i get it, i ordered a RR peanut as well this am :D

-
dks,
Black Stag bone is nothing more than cattle bone with a jig pattern made to resemble the exterior of real Stag, and they use a black dye to bring out the jig.
And that Buck toothpick you mention as having the same color variation in it's yellow comp is likely because that particular yellow comp comes from the same source. The imported Buck slippies are made by the same people who build Rough Riders as well.
From my understanding Buck had a hand in getting the factory over in China that builds these up and going to produce their imported line to a particular standard. SMKW's with their longstanding association with Buck worked in with this factory to produce their Rough Rider line as well as their new licensed Colt stuff. This same factory also has produced some of the imported Remington knives as well as the Marble's Global Series.
2xTap
-
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
-
@dks said:
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
ill compare the RR stockman with the buck 303 i have, although the 303 is a U.S made one and a early model, HH sent me a email yesterday saying they made a mistake and they have no peanuts in stock so i have to wait 7-10 days :ahhh oh well i should get the RR stockman soon, :D
-
Well just had to wait 1 day from HH and the RR stockman arrived this am, im really impressed for the price, i would pay more TBH as there well made and look good to boot , cant wait to try it out, oh and it came sharp
glad i chose this as my first one and now looking forward to the peanut 





-
Looks good!
Nice pics Zed. -
Zed, really nice, RR seems to make these Sowbellies really well
. I have one and it looks and feels way more expensive than it is. I am scared to use it, in case it gets scratched.I, too, got some slipjoints I was interested in today.
An RR, naturally, Elephant toenail. This was a pattern I did not have and it looks huge. It needs some cleaning at the joints, but otherwise it’s fine. I see it more as a novelty knife; a canoe should do everything this does, in a more elegant package.
I also got a Colt peanut stag knife, that I was convinced (easily
) that I needed. The stag (assuming its not fancy cow bone) is deeply carved and caramel coloured and the knife feels well made. It was the cheapest caramel stag Colt model I could find, to see what they were like. It came in a fancy box,
It seems a bit large for a peanut.
The strange thing about it are the nail nicks on the blades. They are different on each blade (one is a long linear one, the other is crescent shaped) and because they are both on the same side the nail nick on the long blade is hidden behind the small blade, making it really awkward to open. I almost get the impression that they run out of blades and used the ones from a different model.
The bottom part of its frame is, reasonably, aligned with the stag scales and the blades are well centred.
It’s hard not to start getting a bit stricter with its overall quality since this series is beginning to approach, lower end, Case money.



-
There is some fine looking cutlery here! One of these nights when I get onto ebay I
just might pick up one of those fine looking Colt knives, I've none, and from what I've
seen here wow.I've two Case knives and have never been all that happy with either.
-
cheers DKS im really happy with it and look forward to more, im going to go for a colt at some point as HH does them and yours look sweet, also seen a make called lone wolf, they do some nice looking slippies including one with fake stag i like, its next on my list

-
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
-
@dks said:
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
they look very nice mate, i do like the case brand but out of my price bracket at this point, but i will try and get at least one

-
-
The steel, I find on mine to be hard to put a good edge on, corrosion on one of the blades
was a real disappointment, whatever ended up on it, a small spot of something ate
through the mirror finish.
Wobble on the main blade, I guess I just got some poor samples/examples as I'm not
going to go against what appears to be mainstream and put them down as a poor
company. :) I do love the look of their knives and the variety they offer in design
and scale material is amazing, which was why it was too bad when I got my examples
in hand. :-\ -
@dks said:
Zed, really nice, RR seems to make these Sowbellies really well
. I have one and it looks and feels way more expensive than it is. I am scared to use it, in case it gets scratched.I, too, got some slipjoints I was interested in today.
An RR, naturally, Elephant toenail. This was a pattern I did not have and it looks huge. It needs some cleaning at the joints, but otherwise it’s fine. I see it more as a novelty knife; a canoe should do everything this does, in a more elegant package.
I also got a Colt peanut stag knife, that I was convinced (easily
) that I needed. The stag (assuming its not fancy cow bone) is deeply carved and caramel coloured and the knife feels well made. It was the cheapest caramel stag Colt model I could find, to see what they were like. It came in a fancy box,
It seems a bit large for a peanut.
The strange thing about it are the nail nicks on the blades. They are different on each blade (one is a long linear one, the other is crescent shaped) and because they are both on the same side the nail nick on the long blade is hidden behind the small blade, making it really awkward to open. I almost get the impression that they run out of blades and used the ones from a different model.
The bottom part of its frame is, reasonably, aligned with the stag scales and the blades are well centred.
It’s hard not to start getting a bit stricter with its overall quality since this series is beginning to approach, lower end, Case money.I just love that Elephant Toenail / Sunfish knife... It looks great IMO...
-
Zed,
Very nice Sowbelly you got, glad you like it. The RR's truely are a great buy, the level of quality is surprisingly good for how little they cost. It'll serve you well.
dks,
Yes, that Colt Peanut you got is fancy cow Bone, not genuine Stag. Not sure where you are buying your knives from but in their description it should say as much. You'll know real Stag when you see it.
The different nail nicks you mention, a long pull one on the mainblade and a short nick on the secondary blade is very common in slipjoints. These particular Colt's are just one in many that have produced slipjoints with this nail pull set-up.
The reason the mainblade's nail pull is hidden behind the secondary blade is because the secondary blades "kick" is too tall. All you have to do is file down the kick a little bit to let the blade rest slightly lower in the frame. It is easy to do, but go slow and check it often. You don't want to shorten the kick too much or your blade will bottom out on the center pin bulge of the backspring. This should of been corrected at the factory before it was shipped, but these things do happen.
Anyway, nice set of knives you got. And remember, when getting into slipjoints the variety is limitless. There are few standards when it comes to patterns, every maker doesn't do each the same way. And when it comes to handle materials in the antler category and those intended to look like such there is Bone Stag, Stag Bone, Bone made to look like Stag but done in different colors, Second Cut Stag Bone, Genuine Deer Stag, Genuine Elk Stag, Genuine Second Cut Stag and then the king of the hill.......Genuine India Stag. Some Bone Stag and Stag Bone can resemble real Genuine Stag quite well. So be careful and know what you are looking at.
If there is ever a question you have as to whether or not something is or isn't, just ask.

2xTap
-
@Sean said:
The steel, I find on mine to be hard to put a good edge on, corrosion on one of the blades
was a real disappointment, whatever ended up on it, a small spot of something ate
through the mirror finish.
Wobble on the main blade, I guess I just got some poor samples/examples as I'm not
going to go against what appears to be mainstream and put them down as a poor
company. :) I do love the look of their knives and the variety they offer in design
and scale material is amazing, which was why it was too bad when I got my examples
in hand. :-\Sorry to hear you've had a run of bad luck with Case. As with any maker sometimes lemons do get out. With manufacturers who do runs on a large scale this can happen more often.
As to their blade material, their regular run stainless stuff called "Tru-Sharp Stainless" is actually 420HC. The same stainless used in many a Buck knife. Heat treat is a bit different but other wise the same steel. That said you have to remember that stainless steel is just that, Stain-Less. They aren't stain-proof. And while 420HC is relatively low in Carbon it also isn't super high in Chromium content, and Chromium is the main alloying element that gives steels their stainless nature.
All stainless steels will rust, some are just more resistant to it than others. I've managed to get rust on some of mine. It takes alot but I have done it.
Not sure why you are having a hard time getting a good edge on their 420HC, it's actually a fairly easy steel to sharpen. It's not a super soft steel and does hold a decent edge but they hone up relatively easy.

As to the blade wobble.........that should of been sent back to Case. Case has excellent customer service. And while it might not be the fastest on the planet they have a good track record for making things right by the customer. You ever have a problem with a new Case piece get ahold of their CS Department. They'll do you right.
2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login