Show your slip joint's thread!
-
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?
Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
-
@dks said:
2xtap, I assumed it was proper stag, I have also ordered one of the other, amber, stag models to see whether I like them. It should arrive soon. I am going through a “stag” phase. What is black stag bone? Stag shaped bone?Zed, nutsak, jersey etc
The handles on the yellow Buck toothpick shown previously next to the Kissing Crane are also displaying this variation of colour mentioned with respect to the RR knives.
That knife, however, was one I had problems with (loose scales, oxidation) so I assumed that the variation of the colour was a problem, associated with the other problems I had (possible exposure to heat/sun/chemicals).
I actually had to take it apart, clean it and glue the scales back.Talking about RR knives their new, ocean models, look quite pleasant (but case gold models look even better…)

Their amber bone, as the one I have in a scout knife, looks really god in an old fashioned way.
thanks for the info ill check its build when i get it, i ordered a RR peanut as well this am :D

-
dks,
Black Stag bone is nothing more than cattle bone with a jig pattern made to resemble the exterior of real Stag, and they use a black dye to bring out the jig.
And that Buck toothpick you mention as having the same color variation in it's yellow comp is likely because that particular yellow comp comes from the same source. The imported Buck slippies are made by the same people who build Rough Riders as well.
From my understanding Buck had a hand in getting the factory over in China that builds these up and going to produce their imported line to a particular standard. SMKW's with their longstanding association with Buck worked in with this factory to produce their Rough Rider line as well as their new licensed Colt stuff. This same factory also has produced some of the imported Remington knives as well as the Marble's Global Series.
2xTap
-
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
-
@dks said:
2x, at least its not plastic, made to look like stag. I noticed that if you rub it with tissue the dye comes, easily, off.
For the price I can´t really complain, it was about the same as the RR stockman.I find it funny that even though the Buck and RR knives come from the same factory, the Buck knives do not have that "mystery" grease/graphite/metal remains in their pivots, that I allways clean after I buy an RR knife.
ill compare the RR stockman with the buck 303 i have, although the 303 is a U.S made one and a early model, HH sent me a email yesterday saying they made a mistake and they have no peanuts in stock so i have to wait 7-10 days :ahhh oh well i should get the RR stockman soon, :D
-
Well just had to wait 1 day from HH and the RR stockman arrived this am, im really impressed for the price, i would pay more TBH as there well made and look good to boot , cant wait to try it out, oh and it came sharp
glad i chose this as my first one and now looking forward to the peanut 





-
Looks good!
Nice pics Zed. -
Zed, really nice, RR seems to make these Sowbellies really well
. I have one and it looks and feels way more expensive than it is. I am scared to use it, in case it gets scratched.I, too, got some slipjoints I was interested in today.
An RR, naturally, Elephant toenail. This was a pattern I did not have and it looks huge. It needs some cleaning at the joints, but otherwise it’s fine. I see it more as a novelty knife; a canoe should do everything this does, in a more elegant package.
I also got a Colt peanut stag knife, that I was convinced (easily
) that I needed. The stag (assuming its not fancy cow bone) is deeply carved and caramel coloured and the knife feels well made. It was the cheapest caramel stag Colt model I could find, to see what they were like. It came in a fancy box,
It seems a bit large for a peanut.
The strange thing about it are the nail nicks on the blades. They are different on each blade (one is a long linear one, the other is crescent shaped) and because they are both on the same side the nail nick on the long blade is hidden behind the small blade, making it really awkward to open. I almost get the impression that they run out of blades and used the ones from a different model.
The bottom part of its frame is, reasonably, aligned with the stag scales and the blades are well centred.
It’s hard not to start getting a bit stricter with its overall quality since this series is beginning to approach, lower end, Case money.



-
There is some fine looking cutlery here! One of these nights when I get onto ebay I
just might pick up one of those fine looking Colt knives, I've none, and from what I've
seen here wow.I've two Case knives and have never been all that happy with either.
-
cheers DKS im really happy with it and look forward to more, im going to go for a colt at some point as HH does them and yours look sweet, also seen a make called lone wolf, they do some nice looking slippies including one with fake stag i like, its next on my list

-
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
-
@dks said:
Just doing our bit to help the economy Zed and Sean
:DI know what you mean about case, they are not pefect, but I love their sodbusters. The case peanut I have came with some minor paint remains on the blade.
they look very nice mate, i do like the case brand but out of my price bracket at this point, but i will try and get at least one

-
-
The steel, I find on mine to be hard to put a good edge on, corrosion on one of the blades
was a real disappointment, whatever ended up on it, a small spot of something ate
through the mirror finish.
Wobble on the main blade, I guess I just got some poor samples/examples as I'm not
going to go against what appears to be mainstream and put them down as a poor
company. :) I do love the look of their knives and the variety they offer in design
and scale material is amazing, which was why it was too bad when I got my examples
in hand. :-\ -
@dks said:
Zed, really nice, RR seems to make these Sowbellies really well
. I have one and it looks and feels way more expensive than it is. I am scared to use it, in case it gets scratched.I, too, got some slipjoints I was interested in today.
An RR, naturally, Elephant toenail. This was a pattern I did not have and it looks huge. It needs some cleaning at the joints, but otherwise it’s fine. I see it more as a novelty knife; a canoe should do everything this does, in a more elegant package.
I also got a Colt peanut stag knife, that I was convinced (easily
) that I needed. The stag (assuming its not fancy cow bone) is deeply carved and caramel coloured and the knife feels well made. It was the cheapest caramel stag Colt model I could find, to see what they were like. It came in a fancy box,
It seems a bit large for a peanut.
The strange thing about it are the nail nicks on the blades. They are different on each blade (one is a long linear one, the other is crescent shaped) and because they are both on the same side the nail nick on the long blade is hidden behind the small blade, making it really awkward to open. I almost get the impression that they run out of blades and used the ones from a different model.
The bottom part of its frame is, reasonably, aligned with the stag scales and the blades are well centred.
It’s hard not to start getting a bit stricter with its overall quality since this series is beginning to approach, lower end, Case money.I just love that Elephant Toenail / Sunfish knife... It looks great IMO...
-
Zed,
Very nice Sowbelly you got, glad you like it. The RR's truely are a great buy, the level of quality is surprisingly good for how little they cost. It'll serve you well.
dks,
Yes, that Colt Peanut you got is fancy cow Bone, not genuine Stag. Not sure where you are buying your knives from but in their description it should say as much. You'll know real Stag when you see it.
The different nail nicks you mention, a long pull one on the mainblade and a short nick on the secondary blade is very common in slipjoints. These particular Colt's are just one in many that have produced slipjoints with this nail pull set-up.
The reason the mainblade's nail pull is hidden behind the secondary blade is because the secondary blades "kick" is too tall. All you have to do is file down the kick a little bit to let the blade rest slightly lower in the frame. It is easy to do, but go slow and check it often. You don't want to shorten the kick too much or your blade will bottom out on the center pin bulge of the backspring. This should of been corrected at the factory before it was shipped, but these things do happen.
Anyway, nice set of knives you got. And remember, when getting into slipjoints the variety is limitless. There are few standards when it comes to patterns, every maker doesn't do each the same way. And when it comes to handle materials in the antler category and those intended to look like such there is Bone Stag, Stag Bone, Bone made to look like Stag but done in different colors, Second Cut Stag Bone, Genuine Deer Stag, Genuine Elk Stag, Genuine Second Cut Stag and then the king of the hill.......Genuine India Stag. Some Bone Stag and Stag Bone can resemble real Genuine Stag quite well. So be careful and know what you are looking at.
If there is ever a question you have as to whether or not something is or isn't, just ask.

2xTap
-
@Sean said:
The steel, I find on mine to be hard to put a good edge on, corrosion on one of the blades
was a real disappointment, whatever ended up on it, a small spot of something ate
through the mirror finish.
Wobble on the main blade, I guess I just got some poor samples/examples as I'm not
going to go against what appears to be mainstream and put them down as a poor
company. :) I do love the look of their knives and the variety they offer in design
and scale material is amazing, which was why it was too bad when I got my examples
in hand. :-\Sorry to hear you've had a run of bad luck with Case. As with any maker sometimes lemons do get out. With manufacturers who do runs on a large scale this can happen more often.
As to their blade material, their regular run stainless stuff called "Tru-Sharp Stainless" is actually 420HC. The same stainless used in many a Buck knife. Heat treat is a bit different but other wise the same steel. That said you have to remember that stainless steel is just that, Stain-Less. They aren't stain-proof. And while 420HC is relatively low in Carbon it also isn't super high in Chromium content, and Chromium is the main alloying element that gives steels their stainless nature.
All stainless steels will rust, some are just more resistant to it than others. I've managed to get rust on some of mine. It takes alot but I have done it.
Not sure why you are having a hard time getting a good edge on their 420HC, it's actually a fairly easy steel to sharpen. It's not a super soft steel and does hold a decent edge but they hone up relatively easy.

As to the blade wobble.........that should of been sent back to Case. Case has excellent customer service. And while it might not be the fastest on the planet they have a good track record for making things right by the customer. You ever have a problem with a new Case piece get ahold of their CS Department. They'll do you right.
2xTap
-
2xtap, thanks for that reply and thoughts, I'm sure your right and I would give them
another try as it can happen to any manufacturer. I'll give them another go on my
stone and strop when I have some time to dig them out. :) -
2xtap, thanks for the offer
, the bone was described as “Brown stag bone” for this Colt knife and “Black Stag” for the 6 blade stockman.
I do not know if the sellers actually know what they are, but I did not contact them beforehand to ask. :(
Usually, with more expensive knives, I would ask more and also ask to see some pictures to select the knives, something necessary with stag.Note that, I am not unhappy with them.
I have some more stag scaled knives coming that should be the real deal.
I will try fixing the peanut's blade, the problem is I will be worried I will end up scratching the bolsters…
On a positive note, the Colt peanut does look like it’s from a more premium product range then the stockman, something expected since they actually do cost about the same and the stockman is a lot more complicated and bigger.
I am posting a picture of it next to the Case peanut and a Kissing Crane to show the really nicely polished springs on it, something I have not seen on any of the other, Chinese made, slipjoints.Zed, you can find small Case lockbacks, new or nearly new, for under 10 dollars to get a taste of the brand. Also their sodbusters, again new or nearly new, can be found from about 15 dollars, if you want a slipjoint, and they are quite good.
I like their fancier models too, but as you said, it’s quite hard to justify the purchase cost, especially for the larger models, hence my peanut. I usually keep an eye on eBay for any auctions on interesting but unpopular models that are within my price range.Semi-Off Topic Rant: :-\ The problem with sending the item back is that sometimes the postage cost is more than the item’s value. Some sellers will reimburse you for the postage cost, some will not. I remember being told by the local leatherman dealer that he would replace my leatherman squirt p4 for free under warranty, provided I paid the 30 Euro handling/postage fee for it to be sent to the States….
-
@dks said:
2xtap, thanks for the offer
, the bone was described as “Brown stag bone” for this Colt knife and “Black Stag” for the 6 blade stockman.
I do not know if the sellers actually know what they are, but I did not contact them beforehand to ask. :(
Usually, with more expensive knives, I would ask more and also ask to see some pictures to select the knives, something necessary with stag.Note that, I am not unhappy with them.
I have some more stag scaled knives coming that should be the real deal.
I will try fixing the peanut's blade, the problem is I will be worried I will end up scratching the bolsters…
On a positive note, the Colt peanut does look like it’s from a more premium product range then the stockman, something expected since they actually do cost about the same and the stockman is a lot more complicated and bigger.
I am posting a picture of it next to the Case peanut and a Kissing Crane to show the really nicely polished springs on it, something I have not seen on any of the other, Chinese made, slipjoints.Zed, you can find small Case lockbacks, new or nearly new, for under 10 dollars to get a taste of the brand. Also their sodbusters, again new or nearly new, can be found from about 15 dollars, if you want a slipjoint, and they are quite good.
I like their fancier models too, but as you said, it’s quite hard to justify the purchase cost, especially for the larger models, hence my peanut. I usually keep an eye on eBay for any auctions on interesting but unpopular models that are within my price range.Semi-Off Topic Rant: :-\ The problem with sending the item back is that sometimes the postage cost is more than the item’s value. Some sellers will reimburse you for the postage cost, some will not. I remember being told by the local leatherman dealer that he would replace my leatherman squirt p4 for free under warranty, provided I paid the 30 Euro handling/postage fee for it to be sent to the States….
thanks for the info mate i will keep my eyes peeled,
would be nice to see what there like,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login