Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Re: First mod - mini Farmer with scissors

Scheduled Pinned Locked Moved The Mod Squad
59 Posts 1 Posters 40.4k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • H
    H
    harryf3
    wrote on last edited by
    #23

    Hand rivet tools

    Rivet squeezer

    This is the most advanced and precise tool.

    It is used in aircraft industry.

    The tool together with the dies may cost $150-200 or more.
    If we are modding SAKs on a regular basis then this is maybe a good investment.

    If you are like me and just want to make your dream SAK, then make another 2 or 3 for your buddies and then quit, that tool is probably not an option.

    U-clamp squeezer

    This is usually a custom made press/squeezer made from a U-clamp.
    The end of the screws must have a proper concave hole to form the head of the rivet.
    This hole is easily made with a round drill.

    Rivet punches

    Like the ones I’ve made with a lathe.
    If we adapt them to some kind of custom made press or guide for hammering then this tool is excellent.
    Just hitting with the hammer is dangerous and it will eventualy hurt the scales.

    All rivet tools require that the excess rod which will form the head of the rivet has the right size.
    If it’s too short the die will not form a complete head and will eventually hit the scales of the knife.
    If it’s too long we’ll have a metal “flow” outside of the die or the pin will bend.

    Ball peen hammer

    The well known basic tool for making a round head rivet.
    Widely discussed in the forum.

    Screw posts

    I’ve searched the world to find the proper size for my mini-Farmer project but couldn’t find 2.2 mm screw posts.

    The thinnest I found was 5mm brass screw posts and solid brass extensions

    This was my second and possibly the last contribution to the mod squad as this is all the knowledge I have about modding a SAK so far.
    I cannot see how we can make our custom alox SAK better.
    The rest is experience and experimenting.

    Once again I hope you found it useful.

    all the best
    Aris, Greece

    1 Reply Last reply
    0
    • Sparky415S
      Sparky415S
      Sparky415
      wrote on last edited by
      #24

      Another great post :salute:

      And a very good idea for correcting a mistake :tu: (better than throwing it at the garage door ::) )

      1 Reply Last reply
      0
      • Mr. WhippyM
        Mr. WhippyM
        Mr. Whippy
        Global Moderators
        wrote on last edited by
        #25

        Fantastic primer!

        Thank you for putting this together! :cheers:

        1 Reply Last reply
        0
        • M
          M
          MultiMat
          wrote on last edited by
          #26

          Looks like a great save mate :salute: :salute: :salute:.

          Another terrific post mate :tu: :tu:

          1 Reply Last reply
          0
          • D
            D
            Doctor.Skipper
            wrote on last edited by
            #27

            harryf3
            Another perfect post! You sholuld issue it as paper or hardback :tu: :tu:
            :salute:

            1 Reply Last reply
            0
            • 8
              8
              82brutus
              wrote on last edited by
              #28

              This is a fantastic post! Thanks for sharing the knowledge! :cheers:

              Martin

              1 Reply Last reply
              0
              • tattoosteve99T
                tattoosteve99T
                tattoosteve99
                wrote on last edited by
                #29

                Very useful info. Especially for us "newbies" into the SAK mods.

                1 Reply Last reply
                0
                • RahmedR
                  RahmedR
                  Rahmed
                  wrote on last edited by
                  #30

                  :cheers:Thanks for the valuable informations, Aris :tu:

                  1 Reply Last reply
                  0
                  • nuphoriaN
                    nuphoriaN
                    nuphoria
                    Admin Team
                    wrote on last edited by
                    #31

                    @Gareth said:
                    I hope you don't mind Aris, but the rest of the mods and I felt there was some excellent info on page 2 and 3 of your thread so we decided to make it a 'sticky'. :cheers:

                    I'm glad you did - definitely worthy :tu:

                    1 Reply Last reply
                    0
                    • RahmedR
                      RahmedR
                      Rahmed
                      wrote on last edited by
                      #32

                      :tu: have no words :cheers:

                      1 Reply Last reply
                      0
                      • C
                        C
                        cerbera147
                        wrote on last edited by
                        #33

                        Excellent :tu:

                        Not just a run of the mill 'Farmer with Scissors' but a Mini Farmer with Scissors :drool: :salute:

                        I can only imagine the disaster if I tried that :ahhh

                        1 Reply Last reply
                        0
                        • T
                          T
                          Tabasco
                          wrote on last edited by
                          #34

                          Great pics and post. I say make this thread a "stickey". 😄

                          1 Reply Last reply
                          0
                          • H
                            H
                            harryf3
                            wrote on last edited by harryf3
                            #35

                            So let’s try to make our lives easier.

                            I found this excellent drawing. Let’s explain it.

                            We’ve arleady formed a round head on the one side of the pin with the ball peen hammer and a vice like here:

                            And we go back to the drawing above and imagine we are working on a SAK.

                            figure 1
                            We assemble our SAK

                            figure 2
                            Skip this step

                            figure 3
                            We cut the pin to the right size, say 1mm exposed

                            figure 4
                            We hit the pin vertically with the flat side of the hammer and we start creating the head.
                            But BEFORE we start hitting we place the already formed head on a bucking surface. This surface has a hole similar in shape with the head. If our working surface is flat then the strokes will flaten the head.

                            figure 5
                            We turn the hammer around and we hit with the ball side at an angle. This will create a better head which is round but not perfect yet.
                            As you see the new head doesn’t touch the scales of the SAK yet.
                            If we continue like this we may hit the scales with the hammer.

                            figure 6
                            We hit the rivet with our domed rivet tool. This will make the round head perfectly round and will drive it closer to the scales.

                            Here a similar drawing:

                            And a very nice animation:

                            http://www.technologystudent.com/joints/rivet4.htm

                            All those tools cost next to nothing.

                            I tried this method yesterday and I made an almost perfect solid rivet without scratching the scales at all.
                            I’ll try to post a pic later.

                            1 Reply Last reply
                            0
                            • H
                              H
                              harryf3
                              wrote on last edited by harryf3
                              #36

                              Here is the new sample rivet made with this method.

                              Pics show both sides and in various angles.
                              The new one is obviously the one in the clear area and not the blue painted.

                              For even better pin-job we need a professional rivet squeezer.

                              And here I stop before this thread is getting boring.

                              1 Reply Last reply
                              0
                              • M
                                M
                                MultiMat
                                wrote on last edited by
                                #37

                                That last rivet looks very good mate :salute: :salute:.

                                harry are you going to do any more Alox mods :think: :think:
                                I am keen to see more :pok: :pok: 😄 😄 😄 😄 😄

                                1 Reply Last reply
                                0
                                • H
                                  H
                                  harryf3
                                  wrote on last edited by
                                  #38

                                  I've arleady restored an old well used 84mm Victoria with 3 layers and all I need is to find a red worn cadet to serve as a scales-donor. Or I'll just use silver scales.
                                  Meanwhile I'm preparing a short review with pics but it is incomplete.

                                  1 Reply Last reply
                                  0
                                  • M
                                    M
                                    MultiMat
                                    wrote on last edited by
                                    #39

                                    Looking forward to it mate 😎 😎

                                    1 Reply Last reply
                                    0
                                    • H
                                      H
                                      harryf3
                                      wrote on last edited by harryf3
                                      #40

                                      So I was at my sister’s the other day and she asked me to do a lot o repairs.
                                      Plugs, wardrobe doors, children’s toys etc.
                                      There was an excessive use of the mini farmer and this proved that the tool selection was good.
                                      Needless to say that the knife stayed there. I’m sure it will serve them for years.

                                      So I made me another one. The second knife of the same project needs no thinking.
                                      This is an improved version.
                                      The bottle opener has a different backspring that offers half "lock"/stop, meaning it stays "locked"/stoped when half open.
                                      The awl is narrower, has a better angle and it’s sharper.
                                      The riveting is better.
                                      For some reason the blades/tools have a better action, similar to factory SAKs.

                                      1 Reply Last reply
                                      0
                                      • tattoosteve99T
                                        tattoosteve99T
                                        tattoosteve99
                                        wrote on last edited by
                                        #41

                                        Is there any way to make this a sticky. Its very good info.

                                        1 Reply Last reply
                                        0
                                        • GarethG
                                          GarethG
                                          Gareth
                                          Admin Team
                                          wrote on last edited by
                                          #42

                                          @tattoosteve99 said:
                                          Is there any way to make this a sticky. Its very good info.

                                          Agreed. What I've done though is merge it with the mini Farmer thread, that way we don't have too many sticky threads at the top of the page. 🙂

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World