Re: First mod - mini Farmer with scissors
-
-
Fantastic primer!
Thank you for putting this together!

-
-
harryf3
Another perfect post! You sholuld issue it as paper or hardback


-
-
Very useful info. Especially for us "newbies" into the SAK mods.
-
-
-
-
Excellent

Not just a run of the mill 'Farmer with Scissors' but a Mini Farmer with Scissors

I can only imagine the disaster if I tried that :ahhh
-
-
So letโs try to make our lives easier.
I found this excellent drawing. Letโs explain it.

Weโve arleady formed a round head on the one side of the pin with the ball peen hammer and a vice like here:

And we go back to the drawing above and imagine we are working on a SAK.
figure 1
We assemble our SAKfigure 2
Skip this stepfigure 3
We cut the pin to the right size, say 1mm exposedfigure 4
We hit the pin vertically with the flat side of the hammer and we start creating the head.
But BEFORE we start hitting we place the already formed head on a bucking surface. This surface has a hole similar in shape with the head. If our working surface is flat then the strokes will flaten the head.figure 5
We turn the hammer around and we hit with the ball side at an angle. This will create a better head which is round but not perfect yet.
As you see the new head doesnโt touch the scales of the SAK yet.
If we continue like this we may hit the scales with the hammer.figure 6
We hit the rivet with our domed rivet tool. This will make the round head perfectly round and will drive it closer to the scales.Here a similar drawing:

And a very nice animation:
http://www.technologystudent.com/joints/rivet4.htm
All those tools cost next to nothing.
I tried this method yesterday and I made an almost perfect solid rivet without scratching the scales at all.
Iโll try to post a pic later. -
Here is the new sample rivet made with this method.
Pics show both sides and in various angles.
The new one is obviously the one in the clear area and not the blue painted.For even better pin-job we need a professional rivet squeezer.
And here I stop before this thread is getting boring.







-
-
-
-
So I was at my sisterโs the other day and she asked me to do a lot o repairs.
Plugs, wardrobe doors, childrenโs toys etc.
There was an excessive use of the mini farmer and this proved that the tool selection was good.
Needless to say that the knife stayed there. Iโm sure it will serve them for years.So I made me another one. The second knife of the same project needs no thinking.
This is an improved version.
The bottle opener has a different backspring that offers half "lock"/stop, meaning it stays "locked"/stoped when half open.
The awl is narrower, has a better angle and itโs sharper.
The riveting is better.
For some reason the blades/tools have a better action, similar to factory SAKs.









-
Is there any way to make this a sticky. Its very good info.
-
@tattoosteve99 said:
Is there any way to make this a sticky. Its very good info.Agreed. What I've done though is merge it with the mini Farmer thread, that way we don't have too many sticky threads at the top of the page.

-
This must have taken you a long time to do all these pictures, thank you

I like your take on repair with the bushing.
But what if we drilled wrong our beloved, expensive and discontinued blue farmer?
And there, in a nutshell, is why I only do silver coloured alox mods

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register Login