Salt water Multitool
-
[quote
Is that titanium swiss army knife a normal production item;
[/quote]
Naaa, that's just me shamelessly promoting something I've been working on for a while. It would be perfect for you though, even the washers are marine grade bronze. :D
-
@bushidomosquito said:
Naaa, that's just me shamelessly promoting something I've been working on for a while. It would be perfect for you though, even the washers are marine grade bronze. :D
I will be happy to test it for you and you do not even have to pay me ! :D -
Naaa, that's just me shamelessly promoting something I've been working on for a while. It would be perfect for you though, even the washers are marine grade bronze. :D

I will be happy to test it for you and you do not even have to pay me ! :DWow what a great offer (rolls eyes) lol. Sorry had to do it. Hehe
-
Its better than what microsoft etc do; I am not asking for money.
-
The handles should be fine. The rest of the tool not so much:

How difficult would a H1 one piece tool be to make?
-
I was a working diver for a number of years and never found a truly good salt resistant multitool . Now I see others suggest in previous posts mention titanium single tools but no one suggested beryllium copper tools which are more common than titanium tools (not saying that they are cheap).
http://mdmetric.com/ampcocat.htm
http://findarticles.com/p/articles/mi_qa3983/is_200009/ai_n8907250/
Made targeting the powder (explosives) and the petroleum industry out of a need for non sparking tools . So a non ferrous (non corroding) alloy was created for this need . When one searches out used items the price is not as bad . I found a used tool store in Tucson not too far from me that usually had a quanity of items as there is a powder plant not too far away . You may find these worth considering .
-
It's too bad that the SOG TiNi tools had only the pliers and handles coated but the other parts are much easier to clean anyway. I would think that a TiNi Sog would provide a very good amount of corrosion resistance. The TiNi Coating is a ceramic and very durable. I have a few of these salted (pun intended) away for someone who wants to either use them for their corrosion resistance or make them shelf queens.

The picture does not do the tools justice.
Bruce
-
PVD coating is awesome and can stand up to a lot of abuse. It isn't very expensive to have it done on a lot of parts vs. one or a few parts. Someone could make a good living taking various multitools apart and sending them off to have them PVD coated and then reselling them. They do lots of other colors including a titanium aluminum nitride coating that looks like black oxide but doesn't rub off, ever. They say it has the same hardness as diamond. There are even low temperature coatings that don't affect the heat treat of blades and tools and still provide most of the protection.
-
Thanks to all.
I had a look at some Diving shops but found nothing.
H1 steel. as used in the spyrco salt series should have been an option but maybe it is not suitable for anything other than knives (too brittle, too elastic, too weak ??? I do not really know.)
A coating is good, but it has to be scratch resistant and really on a knife that you need to sharpen could not work 100%
The beryllium alloy sound interesting, but its rockwell rating is quite low (copper is soft, berillium is brittle) for a knife.
Maybe a combination of all would make one multitool that works in sea water well?
The leatherman and the SOG shown look really sweet and expensive...
-
I had a look at some Diving shops but found nothing.
H1 steel. as used in the spyrco salt series should have been an option but maybe it is not suitable for anything other than knives (too brittle, too elastic, too weak ??? I do not really know.)
A coating is good, but it has to be scratch resistant and really on a knife that you need to sharpen could not work 100%
The beryllium alloy sound interesting, but its rockwell rating is quite low (copper is soft, berillium is brittle) for a knife.
Maybe a combination of all would make one multitool that works in sea water well?
The leatherman and the SOG shown look really sweet and expensive...
H1 steel would actually make a very good plier head - very hard, but extremely tough - it doesn't get brittle, either. Spyderco had a demonstration when their H1 steel knives came out a few years ago where they bent the blade on a Pacific Salt 90 degrees in a vice and it didn't snap.
The problems would be:
- H1 is expensive
- H1 steel cannot be machined in certain ways because it's a work hardening steel. For example, Spyderco does not flat grind any H1 blades.
-
I'm going back "A couple" years here.
But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
-
A buddy of mine charters out of San Diego. He's carried a SwissTool for what has to be close to 20 years..... He uses it hard and it's finish doesn't seem to bothered at all by the environment.
Sent from my iPad using Tapatalk
-
SOG BlackTip? at least they're cheap at the moment, handful left at West Marine for < $30. Just take any stainless tool and rinse it with fresh water and spray down with CLP afterwards.
Lots of stainless marlinspike clasp knives issued by various navies for the last 100 years.
http://www.ebay.com/itm/IXL-Three-Piece-British-Army-Clasp-Knife-4-closed-Polished-stainless-sheepsfoot-/351278736825?pt=LH_DefaultDomain_0&hash=item51c9d825b9
http://www.ebay.com/itm/GERMAN-SAILING-POCKET-BOAT-YACHT-KNIFE-WITH-MARLINSPIKE-MULTI-TOOL-GREAT-PRICE-/191578736157?pt=LH_DefaultDomain_0&hash=item2c9afb861d -
I am not sure what is more rust proof, BO Swisstool or polished Swisstool.
But i think the polished ST is more rust proof.
Other than that i don't think you can get a tool that is more rust proof. -
@NKlamerus said:
I'm going back "A couple" years here.But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
Sounds like you need a Marine Tuff Cloth. Seriously these things are awesome. They will make your tool smell like gasoline for a day or two but make a invisible shield against rust. Best of all they do not leave a oily surface on your tools. Once it dries its like its not even there except for keeping the rust away. Check them out on youtube. For your needs I would get the Marine version.
-
@captain spaulding said:
I'm going back "A couple" years here.
But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
Sounds like you need a Marine Tuff Cloth. Seriously these things are awesome. They will make your tool smell like gasoline for a day or two but make a invisible shield against rust. Best of all they do not leave a oily surface on your tools. Once it dries its like its not even there except for keeping the rust away. Check them out on youtube. For your needs I would get the Marine version.
Added to the cart!
I might order some T9 for the joints too.
-
@captain spaulding said:
I'm going back "A couple" years here.
But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
Sounds like you need a Marine Tuff Cloth. Seriously these things are awesome. They will make your tool smell like gasoline for a day or two but make a invisible shield against rust. Best of all they do not leave a oily surface on your tools. Once it dries its like its not even there except for keeping the rust away. Check them out on youtube. For your needs I would get the Marine version.
Added to the cart!
I might order some T9 for the joints too.

It should keep the rust at bay MUCH better than before. I am interested to see your experience with them since you are in a highly corrosive area. Keep us updated.

-
@captain spaulding said:
@captain spaulding said:
I'm going back "A couple" years here.
But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
Sounds like you need a Marine Tuff Cloth. Seriously these things are awesome. They will make your tool smell like gasoline for a day or two but make a invisible shield against rust. Best of all they do not leave a oily surface on your tools. Once it dries its like its not even there except for keeping the rust away. Check them out on youtube. For your needs I would get the Marine version.
Added to the cart!
I might order some T9 for the joints too.

It should keep the rust at bay MUCH better than before. I am interested to see your experience with them since you are in a highly corrosive area. Keep us updated.

Sure will!
-
@captain spaulding said:
I have been using the stronger, marine version for a few years. I use it on any non SS blades I have stored/not used regularly (e.g. Svord) as I do not have to worry about them rusting when left for a few months/years.
The plastic container keeps it moist and it lasts for a long time.
The downside is the smell. Usually when I coat a few blades I have to leave them outside for a day or two, before storing, for the smell to go. (similar to brasso)
It seems to work well so farI didn't find the smell that bad and once they dried I couldn't smell anything.
Maybe my sniffer isn't what it used to be. 
@captain spaulding said:
I'm going back "A couple" years here.
But after my Wave and my OHT rusting in my pocket I'm on the prowl.
I'm living in the worst conditions for a MT.
Dipped in Salt water, falling in beach sand, covered in fish slime, cutting bait, bending hooks, and even sawing drift wood.
Did anyone ever find a solution? Maybe dip my wave in some T9 BioShield efore every trip? But I don't want the oils dispensing into my pants if I'm wading
Sounds like you need a Marine Tuff Cloth. Seriously these things are awesome. They will make your tool smell like gasoline for a day or two but make a invisible shield against rust. Best of all they do not leave a oily surface on your tools. Once it dries its like its not even there except for keeping the rust away. Check them out on youtube. For your needs I would get the Marine version.
:D
-
I knew you would quote me on that. :D
After I initially wrote that I used the cloth again and really got the full effect. It is quite pungent.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login