Washer and dryer help.
-
i like the old reliable top loaders. Buy a simple one with one button on it -- the ON button on either. Less mechanics - less problems and easy to work on yourself. My ole Ropers lasted for years. Washer is still going to this day and i bought it used in 2000. :o
-
My thoughts
Truth be told I last saw a top loader over 30 years ago and it was ancient then.
And I have been to several countries since. So I have no experience with them.Front loaders have been in use for many years in Europe and elsewhere and you get what you pay for.
A cheap no name one with limited functions and low rpm spin (500-800) will usually last if used daily about 5 to 10 years.
A lower cost branded one (usually Italian brands) will also last around 8 to 10 years.
Better quality (irrespective of fancy functions) ones (German brands usually like Bosch, Miele, AEG etc.) will last 10 to 20+ years and clean clothes better too.
Some machines that I know of have been working, with repairs, for several decades.In the olden days the death of them was rusted drums but this seems to be less of a problem now, though my last washing machine, Italian made, developed pitting in the drum which tore clothes and was not worth fixing (Cheap to buy, the drum would cost more than the machine)
A better quality machine will be worth repairing.
I currently have a Bosch Logix? with an 8kg capacity and lots of, surprisingly useful, settings. Cleans better, cheaper, faster and is quieter. But it was not cheap. Does nearly 2 loads a day.Stand alone dryers generally offer larger capacity for drying compared to combined machines.
A dryer that vents will be cheaper to run compared to one that condenses, as you do not need to use electricity to condense (cool down and turn back into water) the steam.
I have a basic dryer, British made by, I think, whitenight which has been working fine for ten years, though because of my location is not really used that much.
So, research, buy the best you can and don’t pay for functions which sound impressive but you will never really use.
-
Thanks for the great replies.
dks, top loaders are still very popular in North America. Not so much in Europe.
I have my mind set on a top loader due to restrictions of my laundry nook. It was never built with front loaders in mind. If I bought front loaders, I would have to stack them. This would mean moving the vent. I was keen to go this route until I found out the washer door was so low that I would literally have to get on my hands and knees to get clothing in and out of it. Likewise, if I ever had to move them for anything, stacked units would be a little too heavy and unwieldy to do such. My main water valve is located on the right hand wall of the nook. With a top loader, I can just lean over it and have quick access to it should I ever need it in an emergency (knock on wood).
I am not looking forward to this, but on the 27th, I will have to be at the local Future Shop for 6 am sharp to try and get the pair that I have been eyeing all this time. It is 900 dollars off and I think now is the time to jump all over it if I can score them. The LG WT5101HV washer, and LG DLEX5101V dryer are what I plan on getting. If I can't score them on Boxing day, then I may have to settle on a Samsung top loader pair or something.
I just did a load of cotton T-shirts, undergarments, and socks. It took me almost 2 hours to dry them with my current dryer. If I need to repair/replace one unit, I may as well get a new pair. I know that HE top loaders aren't as efficient as front loaders, but it should be a big step up to my current units.
Here is a review of the units I hope to get.
http://www.washerdryerinfo.com/content/LG-WT5101HV-Washing-Machine.htm
http://www.washerdryerinfo.com/content/LG-DLEX5101V-Dryer.htm
-
I'm mostly with dks here. As in most other businesses, German brands usually rule the appliances market around here. Yet brands nowadays hides lots of company inter deals. For example: Bosch and Siemens are pretty much the some regarding domestic appliances, as they united on that front a few years ago. The classic AEG german producer had their household stuff acquired by the swedish Electrolux (which is also a good value) also some years ago.
Having said that, Miele (germain) is usually regarded as top of the line, and Bosch/Siemens are highly regarded as well.
When I bought my house, the constructor had a deal with Bosch where I could be their stuff with 20% discount. So Bosch it went. I have that stuff for 8 years now without any fault** whatsoever.
**actually the washing machine had a stoppage due to that stuff that conducts electricity to the engine wore out. That's normal, and I replaced them with a new ones myself.
Washing and drying machines are low regarded here: they usually don't wash well, neither dry well and are more prone to failures.
My washing machine has 6kg charge capacity and turns up to 1200 rpm. At maximum charge, for a 40º program, it consumes 58 liters of water and 0,65kWh, taking 130min, on the intensive program. These are very good figures! If you take out the intensive, the time is cut on about an hour.
Note that these machines are equipped with sensors which can even reduce those figures if they detect the clothes aren't so dirty.
Ok, found some pictures from when they were new...
Drying machine

Washing machine -- lol, look at the champ on the countertop, my long time buddy!

-
Carlos, I can't see the photos. Only red Xs in a box.
Here is a photo of my laundry nook, and the limitations it is imposing on my selection. Plenty of room for two side by side large units, but the washer has about 9 inches hidden behind that small partition wall. No issue with a top loader. Big issues with front loaders located side by side. I would get the pedestals if I went that route...but I can't.
Likewise, If I were to stack front loaders, I have just enough clearance, but depending on the unit, may or may not have access to the top front controls of the upper drier.
Yes, I have put plenty of time and thought behind this...at least since October. You can see some of my quickly removed side shelves. The main water valve is located under it next to my drain. The upper storage cabinet is not an issue, can be quickly removed if needed...but it sure is handy and would hate to see it go if I can help it.

-
I've hosted the images on postimage but will try imgur now. Here they are:
washing machine

dryer machine

Your configuration hardly allows a front loader machine, in fact. BTW, here domestic appliances have a standard horizontal width of 60 cm / 23,6 in (a little less).
-
Nice set up. I think having them apart like that however would drive me up the wall. :D
Yeah, I am stuck with top loaders. I do like them however, so it isn't much of a loss, even though I had originally wanted to try a front loader just to be different. I guess the next ones are going to be HE types, so that should be different enough for me.
Not at all happy about getting up early tomorrow and crowd surfing. I never go out on boxing day if I can help it. I just hope I am lucky enough to get the pair I want.
-
Update.
OMG!!! It was a very interesting experience. I went to bed early and woke up at 5 am this morning. Got to the store at 5:45. I only saw about 30 people out front standing by the door and thought to myself, well well well...this isn't half as bad as I thought it might be. Then noticed there was no parking. Puzzled, I wondered where everyone was. I had to park behind the building across the street in the Home Depot parking lot. Then I noticed a few people waiting out back. As I walked up, I quickly realized it was the end of the line. There must have been 400 people making a line from the front to the back of the building.
I thought to myself that there is no way I was going to get what I wanted, knowing that only a few washer/dryer sets were reserved for the Sault and Sudbury (Only cities that have a by-law of no stores opening on the 26th). I figured there would be a few in the first 400 that would get to them instead of me.
Door opened at 6 sharp, and the crowd went in an orderly fashion. I made a beeline to the washer and dryers only to see a few others looking at different units. I waited 12 minutes before I could accost a poor employee. He quickly took my name and address down. This got me into the paper queue, which meant I was in. 15 minutes later, I was called, data entered, money transacted, and receipt exchanged.
Very happy to have gotten the set. What a zoo. I was super lucky that I got processed so quickly. I was also going to buy an electric razor, but the lineups at the cash went to the back of the store.
Best part, they get delivered on the 3rd or 4th. I will still be on my holidays, so I can be there to receive them.
<----Does a happy dance
-
Chako, glad you make it. But what was your net saving by buying on the 26th, was it worth it at least?
We traditionally don't have that 26th paranoia here, but it's starting to grow. Yesterday lots of people went on shopping crazy route, but still no stabbings or fights as in other places
-
No nothing like that. it was all orderly and civil. I just don't like waiting in a line if I can help it.
Yes, it was worth it. I saved $900 dollars, meaning each unit sold for a sale price of only $800 each.
-
Hi Dan,
Congratulations on getting the pair, I think you will be very satisfied for many years to come. Plus, there is $ 900 left for you to spend on multi-tools!
After seeing your laundry room I can see why you needed a top loading washer.
Bruce
-
there's a smiley for everything, glad your all sorted 
-
:D -
Despite the fact that I can drive a car , do basic mechanical things to said car , helm a boat , wizz around on the internet , actual be able to use itunes :o and get to grip with most of the features on my iphone , install and remove programs and hardware on my PC and I can program an old VCR ( I think ) . I can do all this and more but I just have know idea how to work a washing machine , its is way beyond me and that my friends is how its going to stay ;)
-

Aye, well I don't have that luxury being single and all. :D
-
Just got them installed.


In the next day or two, I will do my first load...after reading the instruction manual.

-
- They look like they just come out of the Enterprise.
-
After seeing that Dryer picture with the
shoeMulti-Tool rack still installed I have this image in my mind of Dan filling the dishwasher with Multi-tools then putting them on the rack in the dryer. The dryer will do a much better job getting them dry with forced air compared to the dishwasher.That is an advantage to being single...I still remember the BMW (Bit__ Moan Whine) noises coming from a former girlfriend when I but the top end off my dirt bike in the dishwasher. I wish I still had that dirt bike and I am very glad I don't have that girlfriend.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



