Washer and dryer help.
-
I'm mostly with dks here. As in most other businesses, German brands usually rule the appliances market around here. Yet brands nowadays hides lots of company inter deals. For example: Bosch and Siemens are pretty much the some regarding domestic appliances, as they united on that front a few years ago. The classic AEG german producer had their household stuff acquired by the swedish Electrolux (which is also a good value) also some years ago.
Having said that, Miele (germain) is usually regarded as top of the line, and Bosch/Siemens are highly regarded as well.
When I bought my house, the constructor had a deal with Bosch where I could be their stuff with 20% discount. So Bosch it went. I have that stuff for 8 years now without any fault** whatsoever.
**actually the washing machine had a stoppage due to that stuff that conducts electricity to the engine wore out. That's normal, and I replaced them with a new ones myself.
Washing and drying machines are low regarded here: they usually don't wash well, neither dry well and are more prone to failures.
My washing machine has 6kg charge capacity and turns up to 1200 rpm. At maximum charge, for a 40º program, it consumes 58 liters of water and 0,65kWh, taking 130min, on the intensive program. These are very good figures! If you take out the intensive, the time is cut on about an hour.
Note that these machines are equipped with sensors which can even reduce those figures if they detect the clothes aren't so dirty.
Ok, found some pictures from when they were new...
Drying machine

Washing machine -- lol, look at the champ on the countertop, my long time buddy!

-
Carlos, I can't see the photos. Only red Xs in a box.
Here is a photo of my laundry nook, and the limitations it is imposing on my selection. Plenty of room for two side by side large units, but the washer has about 9 inches hidden behind that small partition wall. No issue with a top loader. Big issues with front loaders located side by side. I would get the pedestals if I went that route...but I can't.
Likewise, If I were to stack front loaders, I have just enough clearance, but depending on the unit, may or may not have access to the top front controls of the upper drier.
Yes, I have put plenty of time and thought behind this...at least since October. You can see some of my quickly removed side shelves. The main water valve is located under it next to my drain. The upper storage cabinet is not an issue, can be quickly removed if needed...but it sure is handy and would hate to see it go if I can help it.

-
I've hosted the images on postimage but will try imgur now. Here they are:
washing machine

dryer machine

Your configuration hardly allows a front loader machine, in fact. BTW, here domestic appliances have a standard horizontal width of 60 cm / 23,6 in (a little less).
-
Nice set up. I think having them apart like that however would drive me up the wall. :D
Yeah, I am stuck with top loaders. I do like them however, so it isn't much of a loss, even though I had originally wanted to try a front loader just to be different. I guess the next ones are going to be HE types, so that should be different enough for me.
Not at all happy about getting up early tomorrow and crowd surfing. I never go out on boxing day if I can help it. I just hope I am lucky enough to get the pair I want.
-
Update.
OMG!!! It was a very interesting experience. I went to bed early and woke up at 5 am this morning. Got to the store at 5:45. I only saw about 30 people out front standing by the door and thought to myself, well well well...this isn't half as bad as I thought it might be. Then noticed there was no parking. Puzzled, I wondered where everyone was. I had to park behind the building across the street in the Home Depot parking lot. Then I noticed a few people waiting out back. As I walked up, I quickly realized it was the end of the line. There must have been 400 people making a line from the front to the back of the building.
I thought to myself that there is no way I was going to get what I wanted, knowing that only a few washer/dryer sets were reserved for the Sault and Sudbury (Only cities that have a by-law of no stores opening on the 26th). I figured there would be a few in the first 400 that would get to them instead of me.
Door opened at 6 sharp, and the crowd went in an orderly fashion. I made a beeline to the washer and dryers only to see a few others looking at different units. I waited 12 minutes before I could accost a poor employee. He quickly took my name and address down. This got me into the paper queue, which meant I was in. 15 minutes later, I was called, data entered, money transacted, and receipt exchanged.
Very happy to have gotten the set. What a zoo. I was super lucky that I got processed so quickly. I was also going to buy an electric razor, but the lineups at the cash went to the back of the store.
Best part, they get delivered on the 3rd or 4th. I will still be on my holidays, so I can be there to receive them.
<----Does a happy dance
-
Chako, glad you make it. But what was your net saving by buying on the 26th, was it worth it at least?
We traditionally don't have that 26th paranoia here, but it's starting to grow. Yesterday lots of people went on shopping crazy route, but still no stabbings or fights as in other places
-
No nothing like that. it was all orderly and civil. I just don't like waiting in a line if I can help it.
Yes, it was worth it. I saved $900 dollars, meaning each unit sold for a sale price of only $800 each.
-
Hi Dan,
Congratulations on getting the pair, I think you will be very satisfied for many years to come. Plus, there is $ 900 left for you to spend on multi-tools!
After seeing your laundry room I can see why you needed a top loading washer.
Bruce
-
there's a smiley for everything, glad your all sorted 
-
:D -
Despite the fact that I can drive a car , do basic mechanical things to said car , helm a boat , wizz around on the internet , actual be able to use itunes :o and get to grip with most of the features on my iphone , install and remove programs and hardware on my PC and I can program an old VCR ( I think ) . I can do all this and more but I just have know idea how to work a washing machine , its is way beyond me and that my friends is how its going to stay ;)
-

Aye, well I don't have that luxury being single and all. :D
-
Just got them installed.


In the next day or two, I will do my first load...after reading the instruction manual.

-
- They look like they just come out of the Enterprise.
-
After seeing that Dryer picture with the
shoeMulti-Tool rack still installed I have this image in my mind of Dan filling the dishwasher with Multi-tools then putting them on the rack in the dryer. The dryer will do a much better job getting them dry with forced air compared to the dishwasher.That is an advantage to being single...I still remember the BMW (Bit__ Moan Whine) noises coming from a former girlfriend when I but the top end off my dirt bike in the dishwasher. I wish I still had that dirt bike and I am very glad I don't have that girlfriend.
-
They do look fancy
-
That is a great idea. I will have to give that a go someday.
dks, and complicated.
So new that I missed a piece of tape on the dryer whilst taking that photograph.
Yesterday took the vigour right out of me. Not sure why people like home renovating so much, as I find it a bit frustrating at times. I had the bright idea of also changing my toilet as I found it to be leaking. I assumed it was the wax ring that wasn't doing its job. I used that as an excuse to buy a new toilet.
Well, I figured that I could install the toilet in the morning, and then have my washer and dryer arrive later in the evening. That didn't quite work out as planned. I removed the old toilet only to find out it wasn't the wax seal, but a broken flange.
I quickly realized I was out of my league on that one, and called a local plumber's shop. At first they didn't seem like they could come and help me that day. When I told them I only have one washroom in my small house, they changed me up on the priority list. I did have to wait 3 hours for them to arrive though. Funny how you always miss what you don't have. If there is no water available in the house, you get thirsty. Well, I needed to go to the bathroom simply because I couldn't...go figure.
The cavalry did arrive, but with no company truck. This meant they had to go back and forth a few times to the shop to get tools etc. Then, they had some fun installing the American Standard Cadet 3 model that I bought at the local Home Depot. They mumbled about never seeing one of those before. I bought it because of two things. The tank is very solidly supported, and the sides are covered (This is what caused them some grief during the install). They had to use a reciprocating saw to cut out the damaged flange, and glue in a new one. Great fun. So much for my quick renovation plans.
Whilst the plumbers were having a crack at the washroom, my washer and dryer came in. Apparently the two delivery guys knew the two plumbers, and a good half hour of wisecracks and humour ensued. I was enjoying their reportage so much that any anxiety I had evaporated.
Today, all I have to do is build an over the toilet cabinet, and I can call it quits. So yesterday was a fairly eventful day for my household.

As for a photograph, I know quite a few people may claim no picts, no happen. So here you go...

Sorry, no pictures of me using it.

-
no before and after pictures ?
I have done a few plumbing jobs and still do, and things can get messy and wet very easily.
:DOn a similar note/level I was surprised a few months back when I went looking fo a new toilet seat and ended up buying a US made one (wooden, not plastic)! It was the same price as the Chinese ones and seemed to be of similar quality. I only saw where it was made when I took it back home (took a picture too).
And people in the states allways complain that the US based manufacturers can not compete with the low prices of "imports". (e.g. chinese made knives like the Byrd line)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
