A "how-to" for basic SAK mods. Pic heavy.
-
thanks for the post.

-
Just wanted to say thank you for this tutorial. I've assembled all the donors, as well as the brass and new scales for my soon to be built Scimechanist. Probably wouldn't have had the guts if it weren't for the detailed explanation you gave.
-
You're very welcome Gimmeabreak, I look forward to seeing the finished piece.

-
-
That's an excellent looking mod mate.
Glad the guide was some help. 
-
That's a shiny hammer, don't let Spork see it ;)
Cool mod

-
Thank you... high praise indeed, coming from both of you!! It's been a fun learning experience.
Still a lot to learn, and somewhat addictive too. :DI polished the contact surfaces of that hammer, it seems to make it "stick" (if that makes any sense at all) less to the brass rod when edge peening. I was also kinda suprised I could not find quality 4 oz. and 8 oz. ball peen hammers locally. Had to order the hammers online.
-
That does make sense, I like to keep my balls shiny as well .... that sounds so wrong :-[
I've got a few hammers now, that I've picked up from car boot sales but when I first started assembling SAKs I had to order a couple. Turns out that locally I can only get huge hammers ::)
-
@Gareth said:
You're very welcome Gimmeabreak, I look forward to seeing the finished piece.
s
This one goes everywhere with me. I'd like it one layer thinner for EDC but I refuse to give up any of the tools to make that happen. Sadly, the magnifying glass get the least use but it ups the cool factor enough to keep it in place.

Thanks again for the tutorial. My next project is a Midnight Rambler with whistle scale while somehow keeping the toothpick/tweezers on board. I'm off to do more research.
-
Very nice mate.

-
Hi lads
,
need a pen in your 84 mm Waiter?
You can see following pics; I tried to make some photo-tutorial ;) -
Well done,sir!
-
This is the result.
The scales call for the polishing ;) -
@Doctor.Skipper said:
Hi lads
,
need a pen in your 84 mm Waiter?
You can see following pics; I tried to make some photo-tutorial ;)So you don't put any glue at the end were the tooth pick & pen go in
, I would be tempted to put a small amount on the SAK's pin at that end
but I guess you would run the risk of clogging up the tooth pick & pen's slots doing that
.
The plastic scales should still click into place , I have wondered about the challenge of gluing wooden scales without clogging up the scale tool's slots
.
I have wondered if smearing petroleum jelly into the slots would stop the glue clogging them up

-
@MultiMat said:
So you don't put any glue at the end were the tooth pick & pen go in
, I would be tempted to put a small amount on the SAK's pin at that end
but I guess you would run the risk of clogging up the tooth pick & pen's slots doing that
.
The plastic scales should still click into place , I have wondered about the challenge of gluing wooden scales without clogging up the scale tool's slots
.
I have wondered if swearing petroleum jelly into the slots would stop the glue clogging them up

You are really right - the scales keep very well without adhesive as well.
But - there is something ... I can´t express it - something like untightness, that occurs and that irritates myself. (Epoxide can solute ethanol/clear alcohol as well. Light dust is the rest of milling and can be removed easily.) -
hi first post, been lurking for a while.
thanks for this tutorial, i've been following it trying to take the saw from a camper and put it in a super tinker.
dis-assembly, like in most cases, was pretty darn easy.
i'm having a slight problem when attempting put the camper back together minus saw. (doing that one first as test run)
the spring pieces seem to want to pop off the center pivot pin even after i get a layer situated.
is there a trick or something i am missing to keep it from popping off?
thanks
-
First let me say, welcome to the forum.

I have to admit I'm not quite able to visualise exactly what is going wrong for you, if you are getting both ends of the spring located under their tools I can't understand how it wouldn't stay exactly where it should be in the centre.
I suspect I am misunderstanding the question though.Perhaps someone who's brain isn't quite so tired might be of more help right this minute. :-[
-
Wait, wait! I think I might have just got what you were saying. If we are talking about the blade layer am I right in thinking that the spring is jumping off the corkscrew? Someone (and I forget who now) once suggested that using big bulldog clips to hold the layers together while building can help keep everything in place.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

