Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Scissor test

Scheduled Pinned Locked Moved General Tool Discussion
102 Posts 1 Posters 30.3k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Lynn LeFeyL
    Lynn LeFeyL
    Lynn LeFey
    wrote on last edited by
    #5

    For paper, I love my Crosscut. It'll also do thread fine, but the tiny scissors on a Vic Classic seem more 'maneuverable'... easier to get into small places.

    For being as tiny as they are, the Vic Classics still cut through the seam of khakis (4 layers thick). It was slow, but it happened. I was frankly amazed how much work they could get done.

    The scissors on both the Wave and MP400 were GREAT at small tasks, high precision, and chewed through most anything. I think for 'heavy duty' tasks, any of the MTs whose main tool is scissor heads will work better for really heavy cutting.

    I have to say I'm rather sorry I don't have a wider selection of swiss army knives to test. The test here was intended strictly for plier/scissor based multitools, not SAKs, but I thought the Vic Classic was a good benchmark tool for comparison... and I had one handy.

    Biru: the Wave scissors are top of the heap next to the Gerber MP400. They are, honestly, amazing to me. I hadn't expected that kind of performance, even after messing around with them a bit. However, while they're great across-the-board performers, for day to day likely tasks, the Crosscut and Squirt will outperform them.

    dks: The scissors on the Micra are identical to those on the Squirt I tested. So you can just reference the Squirt's results (which were quite good). Sadly, I had no Surge or Juice for the line-up, but the linked video covered those. So, it should give you an idea where they fall compared to my tests.

    1 Reply Last reply
    0
    • powerringP
      powerringP
      powerring
      wrote on last edited by
      #6

      Excellent review! I'm pleased to see that the Squirt S4 performed as admirably as I would have expected of my favorite EDC tool.

      1 Reply Last reply
      0
      • J
        J
        J Mackrel Jones
        wrote on last edited by
        #7

        Great tests ! Quite a span of materials and tools, and quantifying with results by numbers makes sense.

        1 Reply Last reply
        0
        • dksD
          dksD
          dks
          wrote on last edited by
          #8

          @Lynn LeFey said:
          dks: The scissors on the Micra are identical to those on the Squirt I tested.

          Similar, but not identical (see picture with the noticeably rounder tips of the Squirt). I prefer the Micra ones, though they probably perform the same.

          I also included a picture of the Squirt S4 and PS4 (smaller) scissors for reference

          IMG_2831.JPG

          IMG_2484.JPG

          1 Reply Last reply
          0
          • Lynn LeFeyL
            Lynn LeFeyL
            Lynn LeFey
            wrote on last edited by
            #9

            How about we agree on 'functionally identical'

            I unfortunately didn't have a PS4 for comparison. I would have liked to test their smaller scissors, particularly in comparison to the excellent Vic Classic pair.

            1 Reply Last reply
            0
            • dksD
              dksD
              dks
              wrote on last edited by
              #10

              I graciously accept your apology..... >:D

              😄
              The PS4 ones are not as good as the Victorinox classic ones, mainly in "feel", though they may be ok for smaller hands.

              1 Reply Last reply
              0
              • Lynn LeFeyL
                Lynn LeFeyL
                Lynn LeFey
                wrote on last edited by
                #11

                One more tool tested, Scissors on 91mm Victorinox (Explorer).

                This knife came to me in very used condition. It's a pre-1991 model, and has a screw holding the scissor blades together. I took them apart, did a very minor sharpening to them, and reassembled. They are in very good condition. So, while not new, I suspect they'll react about like a new pair.

                My biggest complaint with these scissors was that for more difficult material, where more lateral force was needed, the spring would pop out from under the handle. Annoying, but not a deal-breaker. Otherwise, for scissors that are over 20 years old, I am highly impressed.

                Vic 91mm Scissors: Failed lid, Barely adequate for 550. Pass PETE and non-corrugated cardboard with distinction. Pass paper, cardboard, t-shirt, khaki. Score: 7

                1 Reply Last reply
                0
                • S
                  S
                  Styerman
                  wrote on last edited by
                  #12

                  Never tried it myself , but some Dude on BF claimed to have cut 12ga. solid copper wire with the scissors on a classic . Without any damage !

                  He had apparently bought up a bunch , that had been seized by the TSA , so he didn't mind doing a "to destruction " test .

                  My personal preference runs to the Vic. scissors , I have found Wave/Charge scissors to be quite sloppy . My cutting with them runs to small /delicate tasks . For more meat and potatoes stuff , I have a pair of Kline Electrician's scissors on the back of my belt .

                  Chris

                  1 Reply Last reply
                  0
                  • I
                    I
                    ICanFixThat
                    wrote on last edited by
                    #13

                    **Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.

                    1 Reply Last reply
                    0
                    • A
                      A
                      AimlessWanderer
                      wrote on last edited by
                      #14

                      @ICanFixThat said:
                      **Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.

                      Francis, we need to know more ... :pok:
                      Where from, obsolete or current, piccies, blah blah blah 🙂

                      1 Reply Last reply
                      0
                      • J-sewsJ
                        J-sewsJ
                        J-sews
                        Admin Team
                        wrote on last edited by
                        #15

                        For all the bad opinions written about the Charge/Wave scissors when they first came out, they seem to perform admirably well, both in the video and in your own testing Lynn. :salute:

                        1 Reply Last reply
                        0
                        • Lynn LeFeyL
                          Lynn LeFeyL
                          Lynn LeFey
                          wrote on last edited by
                          #16

                          I've heard a few folks talking about slop in their Wave scissors, which is weird. Mine are perfect. Absolutely no play in them.

                          I think it was Biru in another thread talking about them cutting a thick medicated pad for a nurse. Yeah, for me, they just cut through everything great. Same with the scissors on the Gerber MP400. They both have the slight failing that the Crosscut/Micra/Squirt S4 didn't, which is lack of leverage for hard cutting tasks. You can't have it both ways, though, and for their size the Wave's scissors are shockingly good, IMO.

                          I should add zip-ties to my future tests. That seems to be one of the real-world things scissors get used for on occasion.

                          1 Reply Last reply
                          0
                          • J
                            J
                            J Mackrel Jones
                            wrote on last edited by
                            #17

                            Zip-ties are darn hard to cut. I use a toothpick -or scissors - to unlatch the teeth inside the clasper part.

                            1 Reply Last reply
                            0
                            • Lynn LeFeyL
                              Lynn LeFeyL
                              Lynn LeFey
                              wrote on last edited by
                              #18

                              I convinced my husband to try carrying a Micra for a while, instead of his Vic Classic, and the first real time he was impressed with it was when he had to cut a bunch of zip ties.

                              1 Reply Last reply
                              0
                              • CraigC
                                CraigC
                                Craig
                                wrote on last edited by
                                #19

                                Great test Lynn. Thanks for posting :tu:

                                1 Reply Last reply
                                0
                                • I
                                  I
                                  ICanFixThat
                                  wrote on last edited by
                                  #20

                                  @50ft-trad said:

                                  @ICanFixThat said:

                                  **Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.

                                  Francis, we need to know more ... :pok:
                                  Where from, obsolete or current, piccies, blah blah blah 🙂

                                  I think it is current, or was recently current, gone from victorinox.com as far as I can tell with their region stuff and the information there seemed a little out of date. It could be that it is very new as well, i have not had time to check the catalog.

                                  Model number is 7.6378, I'll get a picture up on the weekend. I see a couple on ebay mine came from Europe at 40 euros or so (not cheap).

                                  1 Reply Last reply
                                  0
                                  • powerringP
                                    powerringP
                                    powerring
                                    wrote on last edited by
                                    #21

                                    I'll have to take a picture of the scissors on the Buck Xtract Essential for this thread. They're huge!

                                    1 Reply Last reply
                                    0
                                    • I
                                      I
                                      ICanFixThat
                                      wrote on last edited by ICanFixThat
                                      #22

                                      @ICanFixThat said:

                                      @50ft-trad said:

                                      @ICanFixThat said:

                                      **Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.

                                      Francis, we need to know more ... :pok:
                                      Where from, obsolete or current, piccies, blah blah blah 🙂

                                      I think it is current, or was recently current, gone from victorinox.com as far as I can tell with their region stuff and the information there seemed a little out of date. It could be that it is very new as well, i have not had time to check the catalog.

                                      Model number is 7.6378, I'll get a picture up on the weekend. I see a couple on ebay mine came from Europe at 40 euros or so (not cheap).

                                      Oops I had mis-typed the model number, it is 7.6376.

                                      Victorinox_Shears-Professional--7-6367-Hot-Forged-Made-in-Spain__v2358_02-web.jpg

                                      1 Reply Last reply
                                      0
                                      • powerringP
                                        powerringP
                                        powerring
                                        wrote on last edited by
                                        #23

                                        @powerring said:
                                        I'll have to take a picture of the scissors on the Buck Xtract Essential for this thread. They're huge!

                                        As noted, here's a photo of the Buck Xtract Essential, Victorinox SwissTool Spirit X and the Leatherman Wingman scissors side by side. The Xtract's scissors are in a class by themselves in size and, I think, ability. The Xtract is sometimes forgotten amid the more poular Vics, Leathermen, and Gerbers but it's a star in the scissors department. :hatsoff:

                                        Xtract-SpiritX-Wingman scissors 2012-05-05 at 20.jpg

                                        1 Reply Last reply
                                        0
                                        • GarethG
                                          GarethG
                                          Gareth
                                          Admin Team
                                          wrote on last edited by
                                          #24

                                          Though I don't have one myself I've always had a bit of a soft spot for the X-Tract. 🙂

                                          Back to the scissors department we need someone to give us some shots and opinions on the Wenger Business Tool, the scissors on that are pretty impressive as well. :tu:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World