Scissor test
-
Great tests ! Quite a span of materials and tools, and quantifying with results by numbers makes sense.
-
@Lynn LeFey said:
dks: The scissors on the Micra are identical to those on the Squirt I tested.Similar, but not identical (see picture with the noticeably rounder tips of the Squirt). I prefer the Micra ones, though they probably perform the same.
I also included a picture of the Squirt S4 and PS4 (smaller) scissors for reference
-
How about we agree on 'functionally identical'
I unfortunately didn't have a PS4 for comparison. I would have liked to test their smaller scissors, particularly in comparison to the excellent Vic Classic pair.
-
-
One more tool tested, Scissors on 91mm Victorinox (Explorer).
This knife came to me in very used condition. It's a pre-1991 model, and has a screw holding the scissor blades together. I took them apart, did a very minor sharpening to them, and reassembled. They are in very good condition. So, while not new, I suspect they'll react about like a new pair.
My biggest complaint with these scissors was that for more difficult material, where more lateral force was needed, the spring would pop out from under the handle. Annoying, but not a deal-breaker. Otherwise, for scissors that are over 20 years old, I am highly impressed.
Vic 91mm Scissors: Failed lid, Barely adequate for 550. Pass PETE and non-corrugated cardboard with distinction. Pass paper, cardboard, t-shirt, khaki. Score: 7
-
Never tried it myself , but some Dude on BF claimed to have cut 12ga. solid copper wire with the scissors on a classic . Without any damage !
He had apparently bought up a bunch , that had been seized by the TSA , so he didn't mind doing a "to destruction " test .
My personal preference runs to the Vic. scissors , I have found Wave/Charge scissors to be quite sloppy . My cutting with them runs to small /delicate tasks . For more meat and potatoes stuff , I have a pair of Kline Electrician's scissors on the back of my belt .
Chris
-
**Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.
-
@ICanFixThat said:
**Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.Francis, we need to know more ...

Where from, obsolete or current, piccies, blah blah blah
-
For all the bad opinions written about the Charge/Wave scissors when they first came out, they seem to perform admirably well, both in the video and in your own testing Lynn.

-
I've heard a few folks talking about slop in their Wave scissors, which is weird. Mine are perfect. Absolutely no play in them.
I think it was Biru in another thread talking about them cutting a thick medicated pad for a nurse. Yeah, for me, they just cut through everything great. Same with the scissors on the Gerber MP400. They both have the slight failing that the Crosscut/Micra/Squirt S4 didn't, which is lack of leverage for hard cutting tasks. You can't have it both ways, though, and for their size the Wave's scissors are shockingly good, IMO.
I should add zip-ties to my future tests. That seems to be one of the real-world things scissors get used for on occasion.
-
Zip-ties are darn hard to cut. I use a toothpick -or scissors - to unlatch the teeth inside the clasper part.
-
I convinced my husband to try carrying a Micra for a while, instead of his Vic Classic, and the first real time he was impressed with it was when he had to cut a bunch of zip ties.
-
-
@50ft-trad said:
**Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.
Francis, we need to know more ...

Where from, obsolete or current, piccies, blah blah blah
I think it is current, or was recently current, gone from victorinox.com as far as I can tell with their region stuff and the information there seemed a little out of date. It could be that it is very new as well, i have not had time to check the catalog.
Model number is 7.6378, I'll get a picture up on the weekend. I see a couple on ebay mine came from Europe at 40 euros or so (not cheap).
-
-
@50ft-trad said:
**Nice! Some great tests! ** I think at some point I'll have to do a scissors test. Just got in a new pair of shiny stainless steel Vic scissors rated at 60HRc. They are 8" scissors, but the cutting edges are only 2.5". They do cut "very" well though. packaging says hot forged in Spain.
Francis, we need to know more ...

Where from, obsolete or current, piccies, blah blah blah
I think it is current, or was recently current, gone from victorinox.com as far as I can tell with their region stuff and the information there seemed a little out of date. It could be that it is very new as well, i have not had time to check the catalog.
Model number is 7.6378, I'll get a picture up on the weekend. I see a couple on ebay mine came from Europe at 40 euros or so (not cheap).
Oops I had mis-typed the model number, it is 7.6376.

-
@powerring said:
I'll have to take a picture of the scissors on the Buck Xtract Essential for this thread. They're huge!As noted, here's a photo of the Buck Xtract Essential, Victorinox SwissTool Spirit X and the Leatherman Wingman scissors side by side. The Xtract's scissors are in a class by themselves in size and, I think, ability. The Xtract is sometimes forgotten amid the more poular Vics, Leathermen, and Gerbers but it's a star in the scissors department.


-
Though I don't have one myself I've always had a bit of a soft spot for the X-Tract.

Back to the scissors department we need someone to give us some shots and opinions on the Wenger Business Tool, the scissors on that are pretty impressive as well.

-
Great tests Lynn!!
I have always been partial to the Wave scissors, even through all the negative attention they have gotten. For what they are, they do great. I truly prefer Vic 91 mm scissors over most anything else, but the Wave scissors are great.
The SOG powerlock scissors are a ludicrous attempt and should be discontinued. They are worthless.
I found the Old wave scissors to be extremely useful, I cut a key card in half with mine the other day and they went through it like butter. Very tough. I might try to fit a pair into my Sideclip if it's possible.
The Micra/S4 scissors are bad arse. They cut zip ties like nobody's business.
-
Thanks all for the positive feedback on this test.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login