Livarno, Romisen, C8, Small Sun cheap HID torches
-
Thank you, this thread is getting pretty long even though I try to post only about the important torches.
Good to see some people still actually read it. 
Romisen are definitely worth the extra money, though I would not consider them that cheap. You do, for the extra money, get more upmarket finish, threads, possibly LED quality and electronics etc.
Really, for just a wee bit more you can get a Fenix or Jetbeam etc. with lower output but possibly better quality and functions. E.g., the Jetbeam BA20 is about $10 more than the RC-T601 above and should make most people pretty happy, for a long time.
However, a top brand with the throw of that Romisen will cost noticeably more...
-
MXDL SA-22

I am not big on zooms but this had a decent reputation on BLF so I got one.
Cree Q5 LED, runs on 3AAA or 1 18650 (adaptor supplied)
The torch is quite pretty.
Comes with a pocket clip and some rubber rings around its body.
Says Cree 7W on one side.
The zoom works by moving the LED with the reflector closer to or away from a concave (half) plastic lens, using a metal ring (the led does not, ever, touch the lens).



The torch has three settings: High, low, disco.
It has “next mode memory”.Claimed brightness is 400lm…. ::)
The contacts are protected by some magic paint.


I know this is very important to some people, so YES, it can tailstand!!

Draws 0.5A on high with 3AA and 0.6A with 18650 both set ups with freshly charged batteries.
Considering that the 3AA were at 4.04V and the 18650 at 4.15V the light should be a bit brighter with the 18650, at least to begin with. I have no idea (did not test) if it is regulated or not.The party trick of this torch is that by using the zoom you can see a real image of the LED, which looks like the Transformers symbol…


Here are some beam shots, with the Romisen RC-K4 with only
160lm.
The SA-22 is on the right.SA-22 on high, both zoom extremes shown.


And on low.

The total amount of light they produce appears similar. They both run on 3AAA and draw similar currents, though they have different LEDs and electronics.
Size comparison.

The quality is pretty decent for the price and there seems to be a reasonable (taking onto account the design) conduction of heat to the outside.
Good fun!

-
Are you a fan of the Romison ones? they have one that ive been looking at for a few days and am curious as to how they hold up and work? im looking at the Cree XP-G R5 Romison RC-R5, however they say it.. JR
-
-
Is the zoom function similar to the focusing of Maglites? Otherwise, I guess I don't understand what it's used for? ???
-
@Mr. Whippy said:
Is the zoom function similar to the focusing of Maglites? Otherwise, I guess I don't understand what it's used for? ???Since I happened to have a mini maglite next to me..

The difference is that in the maglite you move the head of the torch, with the reflector thus the LED changes position in the reflector altering the beam pattern, whereas here the head does not move but as you turn the green collar round the LED which is stuck on the very shallow reflector (see 2nd picture) moves up and down, with the reflector.
Thus as the beam becomes less focused, by moving the LED away from the ideal focusing position the beam becomes more spread out and less concentrated lighting a larger area.
As you get away from that ideal focusing position the thick lens can not converge the beam in any way so you are basically getting the light as it comes from the shallow reflector.As shown in the pictures previously you go from a concentrated beam, a thrower, into a spread beam, a flooder in torch forum talk.
Thus you have various, functional and this is important compared to a maglite (allegedly), beam patterns, similar to carrying several torches with you.
-
@dks said:
I am not familiar with that model but Romisen have a solid reputation.I am happy with mine, though I do not use them hard enough to really test them
Im not one who thoroughly abuses my things, so longs as they hold up to above a normal day im happy, do you know anything about the AA size 14500 3v battery? thats the only thing i have against that model, (besides the thin wire clip) id have to get a new battery set, i mean it says that it will run on normal AA's but thats only 1.5v so i dont think its going to give off 100% unlike the 14500? JR
-
-
Ultrafire WF-501B XML-T6

Firstly I was quite surprised by how small it was. It is something you can easily put in your pocket.
Length about 13cm, thickness at the head about 3cm and at the body about 2.2cm.I expected it to be about the same size as my Ultrafire C8, which has the same basic specifications.

Came with a sheath for $12.50, which is reasonable for this product.
Does not tailstand and its rear button is not textured, but works fine.
It is a basic, lower tech torch, in that it has a drop-in XML-T6 module rather than a fitted, screw in one.

This can cause problems with heat dissipation as there is not, in theory, that much contact between the LED module and the body, but my sample got hot, noticeably, very quickly so there is definitely enough heat transfer to the outside.
It has an Aluminium reflector and the drop in appears well constructed, with a nice, thick, polished smooth reflector and a glass, secured, lens
Appears well constructed, for the price.
It runs on one 18650 battery, drawing 1.4A on high.
Note that a protected battery will not fit easily in it.
It has 5 modes, high, medium, low and two disco, with mode memory.The LED is nicely centred
The beam is a bit yellowish, like an ordinary filament lamp.
I took some beam shots with the C8 and the Jetbeam Ba20 on high.


And also some with the C8 and the RT-601 on high, again.


The wf-501 beam is decent enough, though it does not have a well defined hotspot. The beam appears similar to the one I get from the Jetbeam which, however, has an OP reflector. The volume of light seems similar to the C8.It is not dark yet, so I will test for throw later.
Generally I am quite happy with what it gives you in such a small package.

-
-
After reading some good things about them I ordered a Tank007 E09, to use as a keychain torch.

I liked the fact that it was similar in size to a Fenix E05 but had 3 power settings, reaching 120lm and was reasonably cheap (about half the price of the Fenix. Currently the Fenix can be had for under $20).
I got mine from Manafont (14.30) http://www.manafont.com/product_info.php/tank007-e09-xpe-r2-3mode-led-flashlight-complete-aluminum-box-set-black-aaa-p-9258
but the cheapest current price seems to be from Dinodirect ($11.99) http://www.dinodirect.com/flashlight-super-mini-tank007-e09-cree-r2-lumen-led.html?DDID=3520-616Summary for the easily bored: I liked it and ordered 3 more, the end. Now go and read the next topic.
Tank007 (James Bond vehicle?) is a company similar to Romisen in that it produces/markets decent lower priced Torches, definitely a step above the lower end Chinese torches, costing of course more than them.
Their webpage http://www.tank007store.com/products/Tank007-E09-Mini-Keychain-Flashlight.html
Come in: Black, Pink, Grey, purple and maybe more..
According to the site:
Product Description
Tank007 E09 Cree XP-E R3 Mini Keychain Flashlight
(Note: some sellers claim different R version; it seems to be a product that changes continuously with several slightly different versions. See BLF for more) *Power Source: 1x AAA battery (Alkaline, NiMH; recommended: Eneloop, Lithium primary, 10440 Li-Ion, or Protected 10440 Li-Ion)
Run time: 120 lumens(33 minutes), 60 lumens(95 minutes), 10 lumens(1020 minutes)
7cm long and 1.5cm wide.
The torch comes in a nice plastic or aluminium container with spare o-rings
It is a bit longer than a Fenix E05 (E05-E09….)

Can tailstand

Comes with a smooth reflector.

There was some debris (looked like a dead insect or threads) inside the reflector. Unfortunately my understanding is that the whole head assembly is secured with glue and not designed to be taken easily apart, so I had to leave it like that. (see BLF, again, for more on that)
The finish is fine, no visible problems.
It also appears pretty tough. I have been carrying it on my keychain for a couple of weeks and there are still no visible scratches (from that…
).Drop testing.
. the torch has been dropped several times from heights ranging from 1m to 2m on hard floors. Apart from some paint being scratched of from the head no other damage has happened.The torch came with no instructions as such so originally I thought it was broken as it went from bright to really low after I played with it.. ::)
Basically it has a twist mechanism for operation. You switch it on by twisting (screwing in motion) the head and then you change modes by quickly turning the head clockwise-anticlockwise a bit.The threads came over-lubricated and work better after some cleaning. Still, no way as smooth in operation as the Fenix or a Jetbeam etc.
The **key ring was rubbish ** and started getting out of shap and stretching in a couple of days. I replaced it with one from a LM Micra.
I am running it on Duracells (Duraloops) but have also ordered some 10440 batteries too.
On high it is **pretty bright ** and can be used as your main light, not needing to carry a bigger, “proper” light. The medium setting is also very good, comparable to the Fenix one and lasts longer. The low setting is quite low and should be useful for reading.
The lower settings are with PWM http://www.tigerhawkt3.com/welcomemat/ledfaqs.htm#2 so a noise can be heard on low and it is possible, with a camera, to see the “gaps” between the beams..
Some beam comparisons then..:On high: Tank007 (120lm), Fenix (27lm), Jetbeam (270lm), Romisen (170lm)

Same, but designed to show the beams better:

Without the (single mode) Romisen. Tank007 on medium, Jetbeam on low (2 modes)

Without the (single mode) Romisen. Tank007 on low, Jetbeam on low (2 modes)

*Pros: good quality
Small and powerful
CheapCons:
Dirty and impossible to clean lens-reflector assembly.
Weak key ring
Not very smooth twist system*I ordered 3 more, to use and give as presents

-
-
A quick write-up on some new torches and related items.

More, with beam shots, when I have nothing better to do.
I also got some 14500 protected Trustfires and 10440 Ultrafires batteries. (Yes, they are dangerous, I know)
The 14500 Trustfires had a nice hologram in the pack.
Tank007 E09
3, 2 pink one black.

They work fine, with both AAA and 14500 batteries (similar outputs, see BLF for more).
These had much smoother threads (clean) than my original one.
They came in the aluminium box, instead of the plastic one that my original one came in. The new black one has S/N before the serial number; the others and the original one do not. The new ones were from Dinodirect.Comparison between the two types of boxes:

Trustfire F25

Bought it because it looked fancy and glows.
Stainless steel – the cap feels a bit like a tin. 5 modes.
Works fine with AA and 14500; brighter on 14500. Gets quite hot on high.
The rings glow nicely.



Should give about 240 lumens (see BLF). Good overall finish; looks expensive.
Romisen RC-G2

It was cheap and I like the brand.
Very good overall quality, nice threads.

“Tactical” momentary on, by pushing the button a bit.
Single mode, 80 lumens, OP reflector.
Runs only on AA!
UltraOK ZS-2
Search for “CREE Q5 LED 300 Lumens” on eBay for several copies.
I chose the colour because it looked nice.

Push pull zoom, works fine on 14500 and AA, single mode.
Small, bright, works fineCompared to the SA-22 (which runs on 18650 or 3 AAA)
They appear to have similar brightness on Lithium ion batteries.Zoom out

And in

-
that Trustfire F25 does look very cool.

-
-
Some more details and pictures of my newest torches, with beam comparison shots.
Firstly the latest arrival, an **Ultrafire C3 ** from eBay for $9.80. It did not say what it was in the listing but from the pictures I assumed it would be a C3.



C3s have been around for a few years so there are many real and fake variations around. This one has 3 modes; High, Low and Strobe. Realistically, the high appears to be around 250 Lumens. (claimed 400…)
This is the* “twin”* of the Trustfire F25 and I bought it because it had a similar look.

The construction feels nearly as good as the Trustfire. It does not have the mid body glow in the dark rings of the Trustfire. The parts of these two are not really interchangeable, for my torches.

It also has a different, older, Cree LED, XR-E instead of the F25s XP-E. The Ultrafire was about 1g heavier than the Trustfire.. Works fine with AA and 14500.
Finally the C3 has an OP reflector and the F25 a smooth one.



The C3** cannot tailstand and has a very sensitive switch**, where even the lightest touch can make it change modes.
Beam comparisons:
Firstly the F25 (on the left) with the C3 on high using 14500.


..and on their lowest setting

The C3 produces a more yellowish beam and the F25 appears a bit more powerful on high
Here is an interesting one: The F25 and C3 on high, with the **C3 using an alkaline ** AA instead of a 14500..

And again: both on 14500

Also a comparison with the Jetbeam, all on high. The Jetbeam runs on 2 partly used AA alkalines from IKEA and still rules (270Lm, real ones).


Comparison with the Romisen RC-G2 (80Lm); the other two on high.


And the other two on low

Comparison with the Tank007 E09, on high, all on Li-ions.


On the topic of actual Lumens, see the difference between 80 Romisen Lumens and 100 Small Sun Lumens, both on AA batteries and both single mode. The Small sun is still pretty decent but definitely exaggerating a bit. (used for 1 weeks camping with no problems, by the way).


The Romisen is a pretty decent thrower too, despite its OP (but deep) reflector!!
**Beam comparison between 2 zooms, on Li-ions
The Sa-22 and the UltraOk **
Flood:

Throw..

I have used the UltraOk for a week, regularly and it is quite good for reading, exploring and has a nice throw, with the zoom. Makes the Sa-22 look unnecessary bulky.
Also see these; with **the SA22 using a Li-Ion and the UltraOk an alkaline ** AA.


Note than when they were both on Li-ions they were nearly identical in power.
Some nice OP reflectors to finish

-
You are getting quite a collection there dks.

-
Thank you Gareth.
They are only cheap torches and unlike my multitools, knives, SAKs they are *all * users. I seem to need torches a lot more than Multitools, in everyday life :D.Some have also been gifted to family members.
I am sure there are many people here with a lot more and fancier torches that do not feel the need to bore people by posting about them..

-
19.99 Euros from LIDL
My halogen spotlight seems to only have 1/2 the original capacity so this seemed interesting



No real heatsinking; plastic construction


The LED looks like a CREE model



the old spotlight


compared

Comes with an adaptor and can be run from the car.
2200mAh Liion battery located in the handle so,
very light as the body tube is empty.
Also has two clusters of smaller LEDs.The main LED gives 180 Lm, for 2 hours
OK, but a bit expensive I think.
-
b]MXDL SA-16[/b]
After hearing about it at BLF I jumped in and got this, all the way from the Far East, for a total of $5
. (http://budgetlightforum.com/node/13671 )It arrived quickly in a white box in a padded envelope from Kaidomain.

Specifications:
Material Aluminium alloy
Emitter Brand CREE
Number of Emitters 1
Color BIN White
**Emitter Type XR-E
Emitter BIN Q5 **
Voltage Input 3.7 V
Battery Configuration 1 x 18650 battery
Circuitry 1000mA
Brightness 350 lm
Runtime 1~2 hour
Number of Modes 3
Mode Arrangement Strong / Weak / Flash
Mode Memory No
Switch Type Button
Switch Location Bottom
Lens Glass
Reflector Aluminum Smooth
Strap Included Yes
Clip Included YesI have to say it: it is a beautiful torch! Decent finish, nicely rounded, no rough edges,, sexy rear button, silver button "frame"....
The front and back ends are silver, making a nice contrast with the brown main body:


Sizewise it is a bit smaller than a C8 type torch.

Comes with **both a clip and a nice strap ** (see 1st picture)
The Cree XR-E is centred ok

The pill is screwed nicely in the head. The tailcap unscrews very smoothly!
There was a blue X on the plate attaching the spring to the pill.. The plate is a bit wonky.

Gets a bit warm on high, as is to be expected.
Tailstands, so it can be used as a room light in a blackout!

The beam, because of the silver aluminium ring securing the glass lens to the head, has a noticeable outer ring.

The torch is more of a thrower, with limited spill (enough to use).
For $5 it is definitely worth it. I am happy with it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
.... I shouldn't have read it, now I want it...