Wenger Scissors and Saw into Vic 84mm frame. Pic HEAVY.
-
Love it

Really nice job, and superb pics for everyone else to be inspired by

-
-
-
more pic's of the fitting together




There is a little bit of clearance on the sides of the spacer in the scissors layer, but it's 0.4mm spread over the two sides... It really is negligible. I guess I could hunt out an old thick tang main blade, or make a custom spacer from aluminium, but this works and it's easy to do. I'm planning to EDC this knife for a while as a bit of a road test ,so we'll see how it holds up.
The spring tension holds the parts in place without them rattling around, no different to the oversize hole in the locking Wenger screwdriver. The difference in size in very small and in fact it probably helps things line up.
Thanks for the props everyone. I'm really just doing this stuff for fun and having nice people say nice things about it makes it all the more enjoyable.
-
-
As assembled the two recruit springs sit about 1mm proud in both open and closed position for both scissors and saw.
This could be tidied up with a little light grinding on the pad of the working end of the spring. I guess I'm a bit of a 90% kind of guy. I tend to get distracted by the next
shiny thing before I get the last of the fine tuning and polishing finished. -
Now that I have acquired pretty much all the donors I need for my 3 potential mods- farmer plus scissors, mini farmer plus scissors, and one more secret mod, I think I'll heap even more praise on ya! Great job man! After years of folks complaining about the scissors and limited saws on 84mm, the (perhaps all too obvious) solution has been found. Maybe the folks at Vic have been secretly chuckling about our ineptitude-in a Swiss accent "it fits right in, can't you see?!?"
If anyone has a waterjet, I'd prob go in on a couple sets of precut 84mm CF scales if a group order was put in.
Cheers
-
Very nice job
JR -
@Syph007 said:
Bravo! Great to know the scissors can be moved there.
I do like the Wenger scissors, it's just the bobbing up and down part as you cut that kept me from loving them.
But.. now there is a possible solution if you took two backsprings of half thickness, one for the scissors spring action and one to keep them open. Ive wanted to do that mod for awhile, but now you've shown I can do that mod AND keep it on a Vic. So... Someday I gotta try that. The list of cool things to try is getting to long though.

Keep up the great modding work, and I look forward to you next trick!
How would you get two half thickness backsprings? Grind down two springs or are there half tickness springs available?
-
Bravo! Great to know the scissors can be moved there.

I do like the Wenger scissors, it's just the bobbing up and down part as you cut that kept me from loving them.
But.. now there is a possible solution if you took two backsprings of half thickness, one for the scissors spring action and one to keep them open. Ive wanted to do that mod for awhile, but now you've shown I can do that mod AND keep it on a Vic. So... Someday I gotta try that. The list of cool things to try is getting to long though.

Keep up the great modding work, and I look forward to you next trick!
How would you get two half thickness backsprings? Grind down two springs or are there half tickness springs available?
Yep grinding down thicker ones.
-
-
-
-
I've just done a hands on side-by-side comparison with a pair of new condition Vic' cellidor scales and the CF is a little more grippy than unworn standard scales.
Kind of like the difference between running your finger along Perspex (acrylic) and Lexan (polycarbonate). they are both smooth, but your finger glides along one and drags a little on the other.
-
-
-
thank you.
and thank you for this thread. I will be attempting this when work slows down a little.
have the donor knives, just need to sand down some pin stock
I'll be attempting to make an awl/file combo like i saw a modder do
probably try it on the wenger file first just in case something goes wrong.
-
ah, I thought you meant the big metalsaw/file...if you are meaning the nail-file in place of the small blade, yes I have fitted then to Vic' knives. they need a very slight amount of material removed from the back end of the tang where the blade sits in the closed position to make the blade sit a little higher so the nail nick is accessible.
Go very slowly with a fine stone and check often, it only takes a fraction of a mm at the back of the tang to lift the tip of the blade several mm. -
-
Looks rather spiffy. When you taking orders?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
