MT.O Prybar
-
Man Tofty, your designs are just awesome!
I know I can do the electronics and mechanics of building a CNC mill and lathe, but Im weak on the CAD side. I have lots to learn, but seeing your stuff is very inspiring!
-
@MadPlumbarian said:
For the star, are the bits out on a 10-15deg? Or are they straight out? If they were straight out and all had a hex at the base you could use a driver on all of them and just rotate it to use the next one? JR
It's a good idea but the drivers are angled to give clearance to the 13mm socket at the back.

The drivers could be moved up the tools body to give the same clearance. I might give it a go later.
@Raukodur said:
the drive star idea looks really interesting.Thanks, i designed it as a replacement for a tool i end up using at work a fair amount but with a much greater range of functions.
It's only 35mm at it's widest point so it's alot smaller than it looks in the renders, which makes it quite cheap for a 3D printed item; about 25 euros.@sparky415 said:
There are some great ideas there Mate
@Mr. Whippy said:
Agree! Those are very clever and aesthetically appealing tools. :)Thanks guys, hopefully more to come and alot of improvements to make to the bike tools.
@Syph007 said:
Man Tofty, your designs are just awesome!I know I can do the electronics and mechanics of building a CNC mill and lathe, but Im weak on the CAD side. I have lots to learn, but seeing your stuff is very inspiring!
The way i use CAD software is just machining by other means. The thought process in organising actions to create the finished item is pretty much the same (with solidworks at any rate). the important difference is that when you mess up in CAD it only takes a minute or two to correct your mistakes.
I got something almost related to this thread through the post this morning......

Which with a little cleaning up turned into......

Pointless but fun.
-
Reminds me.....
-
Just paying homage to a classic in my own way.
-
I'm really digging that driving star!¡!
Sent from my iPhone 4S using Tapatalk
-
Thanks Stealth, here's a size comparison render of the various one-piece tools i've made alongside a 3" straight widgy bar:

I've decided to add a third layer to the bi-tool and thereby ruining it's name completely.
I want to expand and enclose the bit holder as i'm worried about it's overall strength and as the 1/4" square driver sticks up so much a third layer won't increase the tools overall profile much.
It will add a third tyre lever, a 6mm hex driver, a 2.5mm hex driver, another open ended spanner; probably a 13mm and whatever else is suggested.
Of cause this new layer will not be required as nothing will be removed from the first two tools but i'm adding the option now so that all parts can be re-designed to fit together properly. -
Got a few of these tools delivered:

Spanner Frame.



Star Driver.





Apart from a few small tweeks to the design i'm really happy with the way these pieces turned out.
Now just working on the new version of the bi/tri-tool. -
That's a rather clever design.
So is it made from a steel, and does it hold up well?
-
Interesting stuff Tofty..

-
Very nice Tofty!¡!
-
@stealth007s said:
Very nice Tofty!¡!Thanks guys, more to come eventually, i've just ordered the first part of the two/three part bike tool.
I meant to order them all but when changing something on one tool affects all of other tools it gets far too confusing so i'll finish them off later. It's made worse my the fact that i plan to have two variations of the middle tool part to allow for the choice of it all being a two or three piece tool set.@nuphoria said:
That's a rather clever design.
So is it made from a steel, and does it hold up well?The truthful answer is that i don't really know about it's functional resilience. I haven't done any destructive testing yet.
The metal is a 420 type stainless steel blended with a bronze material.
The website says it has a rockwell hardness of 20-25 HRC with a yield strength of 455 MPa.
I think the spanner/wrench applications will work well but the driver profiles will wear quickly.Directly printed titanium will be twice as hard and twice as strong so much better for tools but it's also 10 times the cost.
At the moment the stainless material is the best for the application but soon better materials will come along at the right price for most applications. -
Wow, I didn't know they could do Ti as well :o
I don't have any understanding of the physical properties of printing materials, but I love that we can do this now. There's some exciting medical stuff happening with this technology too.
-
Yep titanium.

But i must admit a new femur seems like a more sensible application that some stupid beads.
-
Both is good

So will they polish up all shiny if wanted? Oh, and what size trits can you hide in them? :D
-
Looking good as always mate.

-
I need to find a place that sells tritium..............

-
Plus 1

@stealth007s said:
I need to find a place that sells tritium..............
You are not allowed to have any over there >:D
-
@stealth007s said:
I need to find a place that sells tritium..............
There's a couple of decent sellers on CPF who I'm sure ship out your way ;)
-
I need to find a place that sells tritium..............

There's a couple of decent sellers on CPF who I'm sure ship out your way ;)
???Not sure if I know that one???
*edit- googled it and found Candle Power Forums?¿?
-
Cookies from Powdered Flour?
Chinese Pollution Fetish?
Callous Person Flatulence?
Cat Porcelain Flush?
Come on, inquiring minds want to know! :ahhh
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login