MT.O Prybar
-
Interesting stuff Tofty..

-
Very nice Tofty!¡!
-
@stealth007s said:
Very nice Tofty!¡!Thanks guys, more to come eventually, i've just ordered the first part of the two/three part bike tool.
I meant to order them all but when changing something on one tool affects all of other tools it gets far too confusing so i'll finish them off later. It's made worse my the fact that i plan to have two variations of the middle tool part to allow for the choice of it all being a two or three piece tool set.@nuphoria said:
That's a rather clever design.
So is it made from a steel, and does it hold up well?The truthful answer is that i don't really know about it's functional resilience. I haven't done any destructive testing yet.
The metal is a 420 type stainless steel blended with a bronze material.
The website says it has a rockwell hardness of 20-25 HRC with a yield strength of 455 MPa.
I think the spanner/wrench applications will work well but the driver profiles will wear quickly.Directly printed titanium will be twice as hard and twice as strong so much better for tools but it's also 10 times the cost.
At the moment the stainless material is the best for the application but soon better materials will come along at the right price for most applications. -
Wow, I didn't know they could do Ti as well :o
I don't have any understanding of the physical properties of printing materials, but I love that we can do this now. There's some exciting medical stuff happening with this technology too.
-
Yep titanium.

But i must admit a new femur seems like a more sensible application that some stupid beads.
-
Both is good

So will they polish up all shiny if wanted? Oh, and what size trits can you hide in them? :D
-
Looking good as always mate.

-
I need to find a place that sells tritium..............

-
Plus 1

@stealth007s said:
I need to find a place that sells tritium..............
You are not allowed to have any over there >:D
-
@stealth007s said:
I need to find a place that sells tritium..............
There's a couple of decent sellers on CPF who I'm sure ship out your way ;)
-
I need to find a place that sells tritium..............

There's a couple of decent sellers on CPF who I'm sure ship out your way ;)
???Not sure if I know that one???
*edit- googled it and found Candle Power Forums?¿?
-
Cookies from Powdered Flour?
Chinese Pollution Fetish?
Callous Person Flatulence?
Cat Porcelain Flush?
Come on, inquiring minds want to know! :ahhh
Def
-
Corrosion Proof Flipflops ;)
-
@nuphoria said:
So will they polish up all shiny if wanted? Oh, and what size trits can you hide in them? :DThey will polish up. I've only cut out one of them so far but due to the spruing marks i've had to sand the large faces flat. The plan is to get them all pattern anodised.
The trits are 2.5 x 10mm gardner fishing indicators.
@stealth007s said:
I need to find a place that sells tritium..............
As Nuphoria said there are some good tritium sellers on Cuddly Panda Fanciers but i don't think they sell some of the sizes that i use in some of my stuff.
I use ebay and i believe that some of the UK based gardner tritium sellers will ship worldwide.Thanks everyone, i'll update my tritium bead thread once their done.
-
I'll check into that

Sent from Endor using Schlapatalk
-
Coolio - thanks Mr Tofty

-
They all look amazing Tofty. Did you need to mess around with the dimensions a lot before everything came out just so, or do the match the 3D model very closely?
Also, forgive my ignorance, but are the sprue connections really needed? Couldn't you print out all the items in a single pass without any connection between them? Just looking at the bits, they're going to start out as separate items as the printer works up from the bottom, it's only about a third of the way up that the sprue connects them...
-
Thanks guys and gals,
Hi Ozymandias, dimension wise there has been a fair amount of trial and error.
Internal features like the hexes tend to end up smaller than on the model while the external dimensions change little.
Most of the models have been modified after i ordered the original prototype but some of that was me being overly fussy.
Originally the only way for me to be sure of getting it right was to order something unmodified then measure the error and correct for it. Now i have a number of correction factors i work to but these can change depending on material depth and wall thickness relative to an internal features dimensions.For the hex bits the spruing isn't necessary, it's a throw back to when i was trying to get them printed in titanium by i.materialise who won't print multi-part models, turns out they won't print sprued grouped models either which is a real shame (and yet they did print the beads, weird).
However although shapeways will print multi-part models in stainless steel they point out that it greatly increases the cost of production for them as there is a fair amount of post printing processing so i was trying not to take the piss essentially. -
This is probably going to read like a bit if a shameless plug but we'll see......
As some of you are well aware there are some pretty good designers on Shapeways, kicking out all kinds of things, with multi-tools and EDC gadgets amongst them.
One such item i came across was <a href="http://www.shapeways.com/model/657824/head-turner.html?li=productBox-search">this</a>, called the Head Turner.
It's a clever little tool that packs a useful array of fuctions into the smallest possible package.
There are however a couple of things that i thought arn't quite perfect; the phillips and flat driver profiles.I decided to model a version of this tool with some of the tool profiles i'd used previously, including the slightly starred hex spanner shape i used on my original tofty prybar.
This is what i came up with:



I felt a bit bad for doing this so i contacted the original designer, explaining what i'd done and gave him the new model file which he has since put up as a <a href="http://www.shapeways.com/model/849224/head-turner-tofty-edition.html?li=productBox-search">new model</a> called the Head Turner: Tofty Edition which i think sounds really cool.
Anyway the point is that this little tool might well be the smallest useable phillips/flat driver on the market; smaller than the screwpop, the maratac screw keys and torqkey and all the other things i've bought in the past to do the job.
(Just to clarify;- i don't get any money from the sales of the Head Turner: Tofty Edition)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login