Wave vs Charge
-
@scorpion008 said:
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?I find it extremely useful. I put a #2Ph/Standard bit in one driver and a 4/5mm Allan in the other. That covers about 75% of my fastener needs. If I know I'm going to be working on a more diverse group of fasteners, I'll bring the cards along.
Generally though, I don't need them along.
-
[quote author=scorpion008 link=topic=41795.msg1#msg1 date=1357238561]
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?
[/quoteIt's to heavy for me to pocket carry. So I go with the voodo sheath. As for the bit kit and extender I dig it. Use it all the time.


-
I kind of have the same setup except I use my molle pouch just for the bits and the driver extender only. My MUT stays clipped inside my belt until I find a holster for it
I'll post a pic in a bit from Schlapatok on my phone as it's easier for me to post images from there. -
Would it be a crazy idea to put, say, one or two bits in that little inner pocket in my jeans and pocket-clip carry the wave on the same side? All I really want is a #1 or #0 Philips (which ever one is closer to the midpoint between the two included Wave bits). If someone has an extra, I would sure be grateful
;). -
Here's the image only because:


Sent from Endor using Schlapatok

-
Personally I hardly ever pocket carry either, so the size has never been an issue. I do prefer the TTi, and that's the one I mostly use because I like the tool set.
I'd probably be just as happy with the Wave handles and the right tools - maybe Metro will sell me his when he tires of it :D
-
Just realized that the #1 comes with the #2, which is redundant. So, if anyone has a spare #0 (opposite side is #3) Philips bit, I would be eternally grateful.
I don't use hex bits a lot and I think that between that bit and the included one I would be set. -
- But the biggest reason is the outside blade fasteners. After using the blade on the Wave a lot, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.

Dude, I thought that was just how they worked. So happy that there is hope. When open and closing my Wave's pliers one side would start to stick ~30 degrees from open and less so when closing. End result: Blade fasteners would spin one way and not the other causing my serrated to scrap against the scales sometimes and not others also it was looser sometimes than others.
Is there any way to take care of this at home? Being in the Netherlands, and my wave being second-hand, so I don't know where it was bought, I wouldn't like to have to send it all the way to the states...
-
@stealth007s said:
Does your Charge hang up when you go to close it?Any of the tools with folding pliers can. Not that they do it a lot.
Lubrication, working all the parts in & general use, kept clean after use, and all bolts kept taut.As for my TTi, the bolts on the pliers pivot don't move when opening the outside tools like with the Surge & Wave. So can't say I have seen it on this one. But I lubricate with a teflon based oil, and never have used WD-40 or any other solvent on my multitools.
-
@bmot said:
Is there any way to take care of this at home? Being in the Netherlands, and my wave being second-hand, so I don't know where it was bought, I wouldn't like to have to send it all the way to the states...Your local dealer should take care of it, irrespective of where you got it from.
You may have to pay something, however, like they do here. -
@scorpion008 said:
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?Can't say I've used it a lot, but I like the feeling of not having to do without, if and when I need it.
-
I'm with ya , the high end steel isn't a big issue as I always pack a folder . The Wave is a better bang for the buck .
Chris
-
I recently lost my charge tti, and had to go back to the wave, and I miss my charge. Its a little thicker, but after getting used to a wave in my pocket the charge is actually easier reaching in and out of my pocket. I could have never paid retail for the charge So unless you find a deal on ebay or CL like I did then yes they are basically the same tool except the charges bonuses and the only minus in my opinion is the cap crimper which i have rarely had use for. I hope Lm redesigns the wave like the curved handles on the rebar. My biggest issue with the wave is i kept getting blood blisters when the ruler pinched my hand, Plus the compfort of the charge. if they rounded/polished the edges, it would help. Also wouldn't mind seeing texture for grip like the new TTI.(which I think btw ruined a classic) I may have to grind down my flat blade into an awl since its redundant.
-
@chris777 said:
I may have to grind down my flat blade into an awl since its redundant.I did this on my TTi and am happy. It took a while as I used the diamond files on a couple of my other multis to do it. I didn't have any other means of doing it, but it came out pretty decent imo, and will be sufficient.
-
Got the idea from this post, and used a Super Tool 300 awl in place of the flathead. Used the flathead as a guide, then put it on the ST300.
Now that the Rebar came out, and purchased one, am drooling at the newer awl. The one I fitted into the TTi wasn't pretty for my first go at it. Lining up them blasted washers was the worst part. (So wants a jig!)
Had tried to drill the flathead first before eventually resorting to that method. Burned up 2 bits, broke one, and dulled a few others - never made a dent. Not sure what you need to put a decent hole on the flathead. Then read a post where a certain fella said, "It's your tool, make it like you want it."Am currently EDCing the Charge TTi & Rebar, but not sure for how long. Sure I'd like to see if the Rebar's awl would fit, but I don't want to mess up the Rebar - just want the awl. :D
Would a trip to Portland land me points to a modified tool? Doubtful. Think Lady Juli are mad at me over a flashlight issue I had with those Zen Imports renegers. ¤¤¤¤Luv my TTi, but half the tools I want are on the Rebar. So once again and dual-EDCing until I decide where to proceed. A blade exchanger on the Charge could offer more advantages & remedy a lot of requests.
• Saw
• Metal/Hack Saw
• Small Hobbyist Saw
• File, Diamond grit & Crosscut
• Awl with Threadloop
• Long & Thin Magnifier
• Spork
• Magnetic Retrieval Extension
• Bigger Scissors
• Strap Cutter¤¤¤¤ (Zen Imports: "Sorry, we can't ship batteries." Duh, _____ take the ______ batteries out. Thing was they reneged on a deal they made & that they offered up in the first place. "We'll send your mom a P5." Was so excited I told mom about the photo I had submitted & that Zen Imports was sending her a LED Lenser P5.After about 2 weeks and nothing, sent them an email inquiring about the flashlight. That's when they said they can't ship flashlights with batteries. ((Guess the batteries appear in those packages by osmosis.)) Had to tell her the bad news and I felt like smurf for a long time.
Stupid me whined to Juli about Zen, and after proving the validity Juli said she'd honor the deal that Zen Imports reneged on. But... I told her I don't want anything from them or Zen Imports. ~ I was mad at Zen Imports, and they can KMA for all I care. They done lost my respect for the position that this placed me in. Mom was let down.
Wanted the light, yes. Felt that my online friendship wasn't worth begging for a light over, no matter how bad I wanted one. Lady Juli shouldn't have to cover for them smurfin' idiots.)Note: Last year I got mom a P5 and she's been using it several times a day/night, and even sleeps with it. Is the best gift ever for an elderly person, especially in her case - having to take a chihuahua outside at night to lay landmines in the lawn. Having to train her to replace the AA battery when it gets wore down is another thing... reminds me, i should check the battery again. This is one of those times one wished the rechargeable version was affordable.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login