Show off your Sak mod's!
-
i like the bail!, i want to put one in a knife one day, but i was thinking just to smash the rod with a hammer to flatten it

-
@lowtech said:
This weekend i did some sorting an cleaning in my workshop and found some time to play around (it was more fun than cleaning...)I tried a new finish on the scales of a beater Spartan that i use i mainly to pop of scales.
I used an old soldering iron to create a very grippy texture.
I think it´s called "stipling" in english.
It was a quick "proof of concept" rather than a well prepared job, so the edges are not defined clearly and the pattern is not very regulary (and i included some old dirt from the soldering iron´s tip...)
But the created finish is grippy and something i have not seen before on a SAK. you can use old, scarred and scratched scales, too.
I think if you carefully mark the outer edge or do the complete scale and use a nicely profiled, clean tip you can produce a nice, regular finish.Excuse the bad pics.
BTW, i practiced peening a bit by making a 1-layer 91 (blades and corkscrew).
the peening was really nice and i managed not to damage any bushings, only to find out i placed the blades on the wrong ends... So i had a little more drilling practice, too.I sharpened teh wire stripper in teh pictured beater SAK and think this is a nice and easy mod that will be made on my users. but I´ll sharpen teh side opposite the Nail nick next time. I used a Dremel with a diamond coated grinding bit.
I would call it "stippling" as well. Nice idea mate.

-
Thanks Gareth!
I like the improved Grip so much that i will do a more elaborate Version of this scales.
I´ll clean teh tip of the soldering Iron, mark the outlines, take a seat in a well lit area and take some more time - And i´ll try to do better pics afterwards. -
Please forgive this cross post... I didn't discover this subforum until after I posted in the Swiss forum.
Rather than wait for my "Plus" scales to arrive, I decided to mod my older (damaged) Ranger's scale to see if I could add the pen slot myself. I figure that if I messed it up, I could go ahead and get a replacement scale from Victorinox when I send it in.
A previous attempt to remove the scale (due to a large gap between the scale and the body plate) damaged the scale, so I've used poster putty (old and nasty as it was) to help hold the scale to the knife. I fixed the gap by boiling water, then putting the scale in for a few minutes, then bending it the opposite direction of the old bend, and "set" it by rinsing in cold water.
After removing the scale for the mod, I used hobby files, and a Xacto knife to cut the grove needed for the pen. It took a lot of test fits (is the "Plus" scale thicker than the original scale?) to get the scale to fit "flush" with the body. The scale is now very thin where the slot is.
Pleased with the results, I swapped the scale of my newer Ranger model knife. Even though the results aren't as clean as a factory made one, I think that it is suitable for weapons load testing (read "good enough for government work")(sorry, I was a 462 in the USAF (RAF Upper Heyford UK, '88-'90)).
Weapons!
K'Tesh -
@KTesh said:
Please forgive this cross post... I didn't discover this subforum until after I posted in the Swiss forum.Rather than wait for my "Plus" scales to arrive, I decided to mod my older (damaged) Ranger's scale to see if I could add the pen slot myself. I figure that if I messed it up, I could go ahead and get a replacement scale from Victorinox when I send it in.
A previous attempt to remove the scale (due to a large gap between the scale and the body plate) damaged the scale, so I've used poster putty (old and nasty as it was) to help hold the scale to the knife. I fixed the gap by boiling water, then putting the scale in for a few minutes, then bending it the opposite direction of the old bend, and "set" it by rinsing in cold water.
After removing the scale for the mod, I used hobby files, and a Xacto knife to cut the grove needed for the pen. It took a lot of test fits (is the "Plus" scale thicker than the original scale?) to get the scale to fit "flush" with the body. The scale is now very thin where the slot is.
Pleased with the results, I swapped the scale of my newer Ranger model knife. Even though the results aren't as clean as a factory made one, I think that it is suitable for weapons load testing (read "good enough for government work")(sorry, I was a 462 in the USAF (RAF Upper Heyford UK, '88-'90)).
Weapons!
K'TeshLooks like that worked well for you K'Tesh. Very nice!¡!
-
Rather nice... did you decide if the scales could be made thinner or not?
-
It looks like he thinned them down a bit.
-
Yes, I did thin both scales down, took them down to 3mm which looks much better. That is the thickness of most of the slices I cut from the 3/4 plate. This was made from the first couple I cut at 4mm before I decided it was too thick. But it worked out well for prototyping as it gave me some extra material in case I made a complete dog's breakfast of the grooves.
I also rounded the ends and continues the grooves around the curve, I really like the way that looks, and with the highly polished surface it kinda looks like a SAK that Agent K would carry. J would have to have something "New & Hot".. maybe one in CF.
Guess if this one finds its way onto eBay it will be described as a Men in Black styled Swiss Army Knife. :)
-
Yes, I can see that! The rounded ends look fabulous :D
-
I like the ribbed aluminium scales!
Reminds me of Rimowa Suitcases or an Airstream Trailer somehow. -
Actually the Airstream thing did occur to me too, but I couldn't remember the name of them.
-
...i had to google the name, too. :)
-
@WiSAKfan said:
couple questions for you bodie1) can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
- where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
That local store didn't have anymore of the ones I got the first time around :( On my last mod I ended up ordering some 2-56 and 3-48 bolts from newegg and it worked out ok. The side with the nuts actually just press on like normal (with a great deal of force). You can see in the picture below where the inside of the scale took the shape of the bolt. On the other side I had to use krazy glue on the bolt heads to keep the scale on. The snap in the tools is still excellent. Oh, and to give the pin enough room to slide into the scale I had to file down one of the nuts using a dremel.


-
Those are cool
I've never seen anyone do it like this before. Very imaginative 
-
couple questions for you bodie
1) can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
- where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
That local store didn't have anymore of the ones I got the first time around :( On my last mod I ended up ordering some 2-56 and 3-48 bolts from newegg and it worked out ok. The side with the nuts actually just press on like normal (with a great deal of force). You can see in the picture below where the inside of the scale took the shape of the bolt. On the other side I had to use krazy glue on the bolt heads to keep the scale on. The snap in the tools is still excellent. Oh, and to give the pin enough room to slide into the scale I had to file down one of the nuts using a dremel.


did you end up cutting the bolts lengthwise to fit??
thank you for the pics and the follow up, i appreciate it. I'm thinking of heading to a hobby store in town and seeing what they have
excellent work.
anything new up your sleeves?
-
Very clever

Don't see why they can't be modded by any means which works :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







