Show off your Sak mod's!
-
Rather nice... did you decide if the scales could be made thinner or not?
-
It looks like he thinned them down a bit.
-
Yes, I did thin both scales down, took them down to 3mm which looks much better. That is the thickness of most of the slices I cut from the 3/4 plate. This was made from the first couple I cut at 4mm before I decided it was too thick. But it worked out well for prototyping as it gave me some extra material in case I made a complete dog's breakfast of the grooves.
I also rounded the ends and continues the grooves around the curve, I really like the way that looks, and with the highly polished surface it kinda looks like a SAK that Agent K would carry. J would have to have something "New & Hot".. maybe one in CF.
Guess if this one finds its way onto eBay it will be described as a Men in Black styled Swiss Army Knife. :)
-
Yes, I can see that! The rounded ends look fabulous :D
-
I like the ribbed aluminium scales!
Reminds me of Rimowa Suitcases or an Airstream Trailer somehow. -
Actually the Airstream thing did occur to me too, but I couldn't remember the name of them.
-
...i had to google the name, too. :)
-
@WiSAKfan said:
couple questions for you bodie1) can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
- where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
That local store didn't have anymore of the ones I got the first time around :( On my last mod I ended up ordering some 2-56 and 3-48 bolts from newegg and it worked out ok. The side with the nuts actually just press on like normal (with a great deal of force). You can see in the picture below where the inside of the scale took the shape of the bolt. On the other side I had to use krazy glue on the bolt heads to keep the scale on. The snap in the tools is still excellent. Oh, and to give the pin enough room to slide into the scale I had to file down one of the nuts using a dremel.


-
Those are cool
I've never seen anyone do it like this before. Very imaginative 
-
couple questions for you bodie
1) can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
- where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
That local store didn't have anymore of the ones I got the first time around :( On my last mod I ended up ordering some 2-56 and 3-48 bolts from newegg and it worked out ok. The side with the nuts actually just press on like normal (with a great deal of force). You can see in the picture below where the inside of the scale took the shape of the bolt. On the other side I had to use krazy glue on the bolt heads to keep the scale on. The snap in the tools is still excellent. Oh, and to give the pin enough room to slide into the scale I had to file down one of the nuts using a dremel.


did you end up cutting the bolts lengthwise to fit??
thank you for the pics and the follow up, i appreciate it. I'm thinking of heading to a hobby store in town and seeing what they have
excellent work.
anything new up your sleeves?
-
Very clever

Don't see why they can't be modded by any means which works :)
-
how my city has changed, drove to two separate hobby stores and both were gone,
the local ace hardware had 2-56 and 3-48 but not even close to long enough. got the lead on a place that is open mon-fri
ace did have a nice selection of saks that i didn't see until today, they had a pretty diverse selection including explorer, compact, a few 111mm slide locking, and accessories...I picked up a new 91mm pen.
-
So these are screws with threading over the entire length?
Did you notice any change in the folding behaviour of the tools? -
@crackout said:
So these are screws with threading over the entire length?
Did you notice any change in the folding behaviour of the tools?that would be the one issue i'm guessing, where the chicago screws that synth007 uses where would be more appropriate
bodie do you have a caliper and could measure the bolts you used?
-
couple questions for you bodie
1) can you provide more info (and pics if possible) of the screws you found? i'd love to try tracking some down tomorrow
- where did you get 2.2mm pin stock? i thought that was the holy grail of sizes and we were stuck sanding 2.5 (or 3/32) down?
thank you!
oh and what spyderco model is that?
That local store didn't have anymore of the ones I got the first time around :( On my last mod I ended up ordering some 2-56 and 3-48 bolts from newegg and it worked out ok. The side with the nuts actually just press on like normal (with a great deal of force). You can see in the picture below where the inside of the scale took the shape of the bolt. On the other side I had to use krazy glue on the bolt heads to keep the scale on. The snap in the tools is still excellent. Oh, and to give the pin enough room to slide into the scale I had to file down one of the nuts using a dremel.


I had an idea that you could get a certain length bolt and then zip off head and use a nut on either side and then the scale wouldn't have to be glued on the head side.
I didn't know exactly what the 2 or the 3 meant in terms of diameter in the 2-56 or 3-48 so after some searching i found this equation:
diameter = (number) * 0.013 + 0.060 that gives you the diameter in inches.
so for the 3 it is .099" or 2.5146mm
so for the 2 it is .086" or 2.1844mm
very close to what we need for pin stock diameter.
i'll be checking out a place called fastenal in town here for some bolts of this size to try them out.
thanks again bodie for posting more info.
-
Ehr, there are screws with a hexnut-head already. You'd just have to counter them with a nut on the other side.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



