Corkscrew - is it true?!
-
Any information on the corkscrew would be of interest. IIRC I read once that (some???) of the corkscrews on the Elinox models were made of inferior steel? One of the reasons I am curious in general about the corkscrew.
-
Oh ye unimaginative ones who disparage the venerable corkscrew
I do not drink wine either but that is probably the least use for the corkscrew anyway. The main one, already mentioned, is to perfectly hold a mini-screwdriver. It is also the perfect solution for tangled fine jewelry chain (my wife is a real believer since I have saved so many of her chains). Come on you closet corkscrew users out there, add to the list. 
-
I was always under the impression they were made in japan. I read that long ago, I think on here somewhere. It was a thread about how various manufactures have parts made elsewhere and what they were. Leatherman pliers heads from mexico, and Im sure it was swiss corkscrews from japan.
-
I'm a corkscrew user and proud of it.
I only have a few without them (not counting ALOX) and if I carry them, there's always a corkscrew on my keychain. :)I'd like to hear what Ibach has to say about where it's made though.
-
This is what google turned up on corkscrew making.
1 An open worm is formed by forging a steel rod into a helix shape. After sharpening one tip, the rod is heated to soften it for shaping. For example, 440C stainless steel is heated at 1,500°F (650°C) for 30 minutes, then at 2,100lF (1,000°C) for five minutes. 2 The hot rod is wound around a rotating cylindrical mandrel. To help guide the rod into a uniform spiral with the desired angle and spacing between successive coils, a grooved mandrel may be used. 3 Immediately after coiling, the spiral is hardened. This is done by reheating the worm to 1,500°F (650°C) and letting it cool slowly. Mild steel, on the other hand, is quenched by plunging the still-hot spiral into room-temperature water. -
Origin , no biggie , they work for me and many friends !
Chris
-
"In the past the corkscrew was forged. But since decades we buy the corkscrew from a French supplier as a semi-finished product." Sachbearbeiterin - Customer Service, Victorinox, quoted by Metaleer over on KnifeForums, 10-07-12
-
Thank you for this
. Since my info also had "French supplier". It was mentioned 3 different aswell but not sure. This they have done for along time. -
@Xelkos said:
Thankfully the Swiss are resistant to Californians.Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not all of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
-
Believe it or not i like Leatherman alot, no matter what people say it is a high quality product. Could be better against corrosion. this is just a maintenance problem. Well Leatherman is not for me to discuss here.
The Swiss use steel from other countries, design from other countries and parts. They have used different steels from Germany and France. Probarbly Sweden aswell, since both Wenger and Victorinox older catalogues say this. It must be steel from Sweden since they say drop forged Swedish stainless steel blades. I did some research before but i got to a stop. Could not find it, i had in mind Fagersta , this place suffered after the steel crisis in the 70s, put down around 1980. But Fagersta Sweden is just speculative.
Blades are not forged anymore on the SAK, and it is all about using high quality stainless with the DIN. After the image of the Brand
-
@Xelkos said:
Thankfully the Swiss are resistant to Californians.
Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not all of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
Am a defected native too. :D Lovely here in Idaho, 'cept for jobs & single women.
-
@Xelkos said:
@Xelkos said:
Thankfully the Swiss are resistant to Californians.
Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not allra of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
Am a defected native too. :D Lovely here in Idaho, 'cept for jobs & single women.
Heh, chased a single woman to the Blue Ridge, and fell in love with the place, still lots of natural beauty and less frantic people.

-

I hope this gives an idea how it's actually made. I made this picture in Ibach at the factory....
-
@Xelkos said:
@Xelkos said:
Thankfully the Swiss are resistant to Californians.
Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not allra of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
Am a defected native too. :D Lovely here in Idaho, 'cept for jobs & single women.
Heh, chased a single woman to the Blue Ridge, and fell in love with the place, still lots of natural beauty and less frantic people.

Some guys have all the luck! :D She got a sister?
-
@Xelkos said:
@Xelkos said:
[quote author=Xelkos link=topic=43954.msg709259#msg709259 date=1364247989]
Thankfully the Swiss are resistant to Californians.Good to see that the Swiss snub their noses at that over-nosy busy-body state.
Not allra of us native Californians are keen on the Big Brother Bureaucracy there either, seems they are trying to idiot-proof everything to the insult of those of us with a shred of common sense. Which is one of the reasons I left, kind of a shame though, there is a lot of natural beauty there along with the unnatural ugliness.
Am a defected native too. :D Lovely here in Idaho, 'cept for jobs & single women.
Heh, chased a single woman to the Blue Ridge, and fell in love with the place, still lots of natural beauty and less frantic people.

Some guys have all the luck! :D She got a sister?
[/quote]Alas no, only a sister in law, and not to be overly superstitious, but I attribute my luck to carrying one of my lucky SAK's or other very faithfully. ;)
-
@J Mackrel Jones said:
"In the past the corkscrew was forged. But since decades we buy the corkscrew from a French supplier as a semi-finished product." Sachbearbeiterin - Customer Service, Victorinox, quoted by Metaleer over on KnifeForums, 10-07-12Well, well... learning something new every day. I had read long ago that it was from a Japanese company, and didn't have any reason to doubt it.
Another proud corkscrew user here... It's a dandy micro-marlinspike, it holds the cord when I'm making lanyards and such, it holds the micro-screwdriver, it wrassles hard-to-get-to porous material (ceiling tiles, filters, etc.), an-nnd... it opens bottles of wine! My wife and I like to take day hikes to the many waterfalls here in the southern Blue Ridge Mountains, and pack in a picnic avec le vin.
If the can opener blade didn't work as well as it does on Phillips screws, then the corkscrew vs Phillips question would be a real quandry for me, but as it is, the corkscrew is a win-win.
-
I actually used mine for the intended purpose the other day. Wine :). Funny thing is the cork was hard to come out so I thought how do this work? Then it occurred to me. The slight back movement the corkscrew and other back side tools do have a purpose. I screwed it in until it was flush with the end. Then a slight push with sak and it was uncorked. Gently pulled and out it came. Good on ya Vic. Works like a charm.
-
"Corkscrew: Just start the point in near the center of the cork and turn; the corkscrew will naturally follow its point on in. The hardest part of pulling the cork is to first get it moving, that first millimeter. This can be done easily by turning the corkscrew all the way down, until the back of the SAK is on top of the bottle. Lever the body of the knife a bit against the top of the bottle, as if starting to close the corkscrew (along the length of the knife, not sideways) to start the cork. This will put a small dent in the alox divider, but now you’ve got a veteran SAK. Then hold the bottle between your feet and pull straight up. Try not to hit yourself in the face. Sommeliers say to turn the bottle and not the cork, so maybe don’t put it between your feet in a French restaurant."
The SAK Owner's Manual -
Actually, Vic recommends not using the handle for leverage.
From http://www.victorinox.com/ch/content/faq_SAK_customer_service_page/category/1 :
Fully insert the corkscrew into the cork and pull the cork vertically upwards and out of the bottle. Try to avoid twisting or tilting the knife body
Just use straight arms (yes, both arms) and pull with the shoulder muscles, instead of the arm muscles, if the cork puts up a fight.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login