Silverline LM Crunch clone
-
Hi there MT.O. I am a new member, long time lurker. I am a hardware design engineer (electronics) with a penchant for classic motorcycles.

I bought 4 Silverline faux crunchs ((crunches?)SLFC) as soon as I saw the price. Rather good for the money but it is still flawed in quite a few ways.
Pros:
- It comes with a lifetime warranty from SL if you register within 30 days of purchase.
- It costs less than a round of beers.
- The vice grips are actually rather nice. (As I would expect when it is a direct rip off a quality product!)
- Nice positive feel to the lock mechanism.
- The blade can be easily modified to be UK legal.
- It is made of mild steel (I think) so I magnetised it :D This also means it can be welded.
Cons:
- The wire cutter is plain rubbish.
- The ancillary tools are poorly thought out.
a. Do I really need 3 kinds of flat screw driver?
b. Why is the medium screw driver not also a can opener (like a SAK)? There is plenty of room.
c. The file is meh. - There is no ruler stamped on the side!
- The screw is a bit rattly. (Perhaps this is because they have used an M6 and the original crunch, being American had an imperial pitch threaded bolt hole? I don't know)
- The pivot bolt is just not quite the right length. If you do not have loc-tite your only option is to torque it up, This squeezes the handle together making it extremely hard to get the little tools out.
I have addressed the problem with the pivot bold by replacing the male part of the pivot bolt with an M3.5 countersunk screw. This allows the pivot to be properly torqued up but leaves the tools noce and loose but perfectly stable when in the locked position.
I have addressed the rattly adjuster screw with an M6 SS hex head bolt. The thread seems to be a slightly better fit.
I think I may make the following modifications to one of my SLFC:
- Make the blade UK legal.
- Ditch the lanyard loop ::), phillips screwdriver, file and medium screwdriver. Put a tiny rare earth magnet in the handle and store a small flat head/phillips screw head hex bit in the space.
My recommendation is to buy as many as you can while you still can at the absurdly low price of £8.50. I would feel extremely annoyed if I lost a SS leatherman that cost me ~£100, only mildly miffed if I lost a SLFC.
After playing with my SLFC I really want the real deal. It would be nice to have working wire cutters but the lame selection of tools in the handle kind of puts me off. Also I do not know what leathermans policy is on honoring warranties in the UK. Secondary to that is the price, in the UK we are charged more for everything. 1$!=1£, stop ripping us off multinational companies!
The cheapest place I have seen to buy a crunch is through ebay. There is an American seller who charges £40+~£15 shipping and in addition to that, unless he will play nice there is also a 20%+£8 tax and administration charge.
Does anyone know where to get a new/almost new crunch in the UK for a reasonable fee?
-
'Buy as many as you can, while you can.....'
Are you thinking Leatherman has taken out a law suit against Silverline and they will withdraw it from sale? Can anyone tell me how Silverline can get away with such blatant infringement on copyright? -
Silverline get away with it because they are not in any way a manufacturer. They simply import cheap tat from China. Some factory has ripped off the leatherman design then either approached or been approached by Silverline. Silverline are presumably always on the lookout for more low cost stuff to add to there 'line'.
Buy as many as you can because it is a good item for the price and with any grey market rip-off item from the east the supply is questionable. This year the factory may be making SLFC, next they might be making knockoff bicycle parts. Although in the case of knockoff bicycle parts I imagine it is more the case that once the run of 10,000 items the customer asked for has completed they just feed their production line with lower quality materials and stop rejecting all but the worse defective items. After your customer has paid for the tooling of the production line (the expensive bit) and you have the staff to make 10,000, it costs very little to make another 10,000. It is the cost of shipping out your manufacturing costs to the east. As soon as it is made in China you have lost control of your product. Although this is not really the case with leatherman as they are manufactured in the USA(?).
There is no copyright issue possibly because; 1. The crunch has 'pat pending' stamped on the side which means the patent has not been fully granted. 2. China does not give a rats *ss about western patents. 3. The American patent system does not extend to the EU (thank goodness). This possibly goes some way to explaining why they are hard to get hold of in the states. If you tried selling them in the USA you would get lawyer stomped in about 10 seconds.
Don't get me wrong, this is a knock off and of no where near the same quality of the real thing. I in no way condone the quick buck mentality that goes behind making cheap knockoff tools but if you think I am going to spend nearly £400 on LMC (car, motorbike toolkit, pocket, house) that I cannot even keep in my pocket due to silly UK laws, you would be mistaken.
Look at it this way, before I would NEVER have bought a crunch before. Now I have seen how good this cheap a** knockoff is it is not a question of if I will buy a real one but when!
-
I just read through All these posts and now I want one :ahhh
-
me too Paul ! :ahhh
at that price i don't think i can NOT buy one
-
Don't get too excited chaps. It's a very cheap copy of a tool which is very limited in function and frustrating to use in my opinion. By all means get one to play with, but I got rid of mine pretty quick, and I'm just REALLY glad I hadn't forked out for the genuine article.
It's a good tool to see if you like the format, but I doubt it's a tool that would suit most people in use - too much faffing about and not enough function. Unless you actually NEED locking pliers, this will almost certainly be lost at the back of a drawer in a short space of time. Again, just my opinion :)
-
@50ft-trad said:
Don't get too excited chaps. It's a very cheap copy of a tool which is very limited in function and frustrating to use in my opinion. By all means get one to play with, but I got rid of mine pretty quick, and I'm just REALLY glad I hadn't forked out for the genuine article.It's a good tool to see if you like the format, but I doubt it's a tool that would suit most people in use - too much faffing about and not enough function. Unless you actually NEED locking pliers, this will almost certainly be lost at the back of a drawer in a short space of time. Again, just my opinion :)
I've been thinking along the same lines myself. I'd like to try one out some day just to see how it works but I don't see myself using it. I have enough of drawer fillers already. ::)
-
I've got one since a few months now, and I can only share xt60043f's opinion.
I use it as a bike tool as I go to work each day that way, and it has always been a reliable tool. It's been through rain, dirt and grease, and it still works great.
The medium and philips screwdrivers are indeed useless, and the wire-cutters won't cut mutch. And, as the original item, it would benefit from a can-opener instead of the extra screwdrivers. Someone a bit skillful could adapt a can-opener on it I presume. The blade is easy to remove, a good point as this tool is sold in the UK.
The lifetime-warranty isn't important to me as I leave the UK in 2 weeks but it shall be noted that the conditions are rather strict : "This guarantee does not cover damage caused by abuse, misuse, modification, accident, or fair wear & tear".
And as 50ft-trad underlined, one must keep in mind that's not the average multitool either, and should be considered only if you need locking pliers.
-
I'm glad Al decided to get rid of his as quickly as possible since it ended up in my hands somehow....
I agree with what everyone is saying though- that this is only about 70-80% as good as the Crunch, which is a very limited market tool to begin with. Still, at about 10% the cost of the Crunch, it is a great deal.
Def
-
as my old Dad used to say "it might come in handy if you find a use for it !"

-
I have just figured out why the SFLC plier head does not swing fully into the body.
If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
-
Just received my Silverline Crunch - such amazingly quick service from Amazon UK. Looks fantastic and similar to the Leartherman Crunch except for the little notch mentioned above. The only issue I have is the tool does not close completely flush (2nd picture), and there is slight up/down play on the locked blade.
Very pleased for £9.10 -
Amazingly quick ??? It took them a week to deliver mine. Literally a week. They had not even dispatched them till 3 days after I placed the order. I suspect it is a ploy to get us to pay for Amazon prime...
Woot, I now have a UK legal to carry SLFC!
2 minutes with Dr File and...
Before:

After:

The blade 'sticks' in position like a non locking SAK but does not NEED the lock clip pressed to put it back, just a firm push. It is now a non-locking knife and thus legal to carry in the UK. The nicest aspect of this is the fact I would have the handles closed to use the knife anyway so there is no chance it could close on my fingers anyway.
Still, if a jobsworth copper wanted to take it he would find some reason to get you under section 57 of the 1984 'I don't like the look of your face sonny' act.
-
@xt60043f said:
I have just figured out why the SFLC plier head does not swing fully into the body.If you look on this image:

You can see there is a dent between the silverline print and the big circular pivot for the plier. This is not present on the real crunch.

So there you have it! There is silverline's innovative feature! This is their improvement to make it a distinguished product!
But seriously, if they had put the dent on the other side of the same handle, in the same location, it would have stopped the plier head being recessed so far into the pivot handle and allowed it to close nicely. This would probably allow it to be 'flipped' like the leatherman.
The copy is actually exactly as it should be, with the notch only on the left side of the tool and not present on the right side. Your comparison pictures have the tools seen from different sides.
-
The picture of the leatherman is from both sides.
-
My LM Crunch has exactly the same notches, really
-
I just looked at some images on the net, it would seem the picture I linked to is unique in that it does not have the bump between the pivot and the stamped leatherman logo. So the image is perhaps of an early model or a prototype?
None the less, I tried to remove the bump with a hammer and a punch. Unfortunately I do not have a 'round the corner' punch so I could not get a decent hit on it. I then drilled it out with a 3mm drill. The SLFC now closes in a similar fashion to the real one. i.e. the plier jaw sticks out one side and the 'clip in' pivot bump sticks out the other. I can now flip it open like the videos as well! whereas before, it was just too stiff to get the head out with one hand.
-
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
-
@Taxi Dad said:
Well it seems Silverline no longer list this item on their web site :o
Discontinued!
you smurf ! you've dragged me down off the fence
I've just ordered from Amazon , even though I'm pretty sure I don't need it :ahhh :ahhh :ahhh :ahhhNonsense, everyone needs more tools!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login