The 30 Day Victorinox Huntsman Challenge!
-
I just read through the whole thread. :o Very good testing of what a quality SAK can handle in day to day tasks and above. I'm looking forward to the updates.

-
@Schneider said:
I just read through the whole thread. :o Very good testing of what a quality SAK can handle in day to day tasks and above. I'm looking forward to the updates.
Hopefully my next update doesn't have awesome sentences like "More often today is what I suspect is the most common work thing apart from cutting that Vicky's done: prying!" What a mess!
-
I just read through the whole thread. :o Very good testing of what a quality SAK can handle in day to day tasks and above. I'm looking forward to the updates.

Hopefully my next update doesn't have awesome sentences like "More often today is what I suspect is the most common work thing apart from cutting that Vicky's done: prying!" What a mess!
That sounded like a politician speaking. :D As long as it sounds intelligent and you use big words, you're good to go. :P
-
Day 26 ended with something more important than building a business park: bicycles!

Vicky's hard to spot, because Swiss Army Knives and my repair stand are the same colour.I needed to clean up my brake pads (which I'm going to have to replace soon enough anyway). Step 1, unfortunately, requires a 2.5mm hex key, which Vicky can't replicate (don't think I haven't tried). Guest shot time, Gerber Zip Hex!

Credit where credit is due, after all.Here's the rear drive-side brake pad. This particular pad should be a reddish-pink.
First I wiped it with a damp cloth, then it was Vicky to the rescue! The small blade picked out some pieces of grit embedded in the rubber.

You can pick your friends, and you can pick your nose, but you can't pick the grit out of your brake pads. Wait, yes you can! What's the punchline again?Next the small blade scraped the grossest leftover lumps from the pad.
Then a quick sanding, and here are some new-found friends:
Three more times, and Vicky can call it a night!
Finally, the actual end of Day 26!
-
:ahhh Just 4 days left! :ahhh
:(
-
Day 27 happens to be my last day of construction, possibly ever. First, though it gave me something to get all rubric red excited about! Dumb tool misuse with surprising results? Check!
I don't know if you've ever tried to get into a scissor lift that's raised up to roof height, had the emergency stop in the basket controls pressed, and then abandoned while a six-foot parapet is added to the roof, but I can tell you it's not possible to do very safely. The good news is there are controls at the bottom of the lift for just such a contingency. The bad news is the lift is ten hundred years old, and the hatch cover for the controls is bent and dented, not to mention sealed shut by ancient drywall mud. Good thing a certain pocket tool has a prybar!

Yes, I do believe that's K.I.T.T. in there.And, of course, more prying.

The picture is misleading. The plywood is perpendicular to the deck.Here's where things got a little interesting. One piece of backing was a little loose, so I got it to about the right height, then got one screw in the middle, and lightly tapped the one end down to the right height.

Well, I say I tapped it lightly, but who am I kidding?The next piece was not loose. I needed to seriously wail on it to knock it into place, but my hammer had already been taken down to my truck by a well-meaning soul. So...
I went to town on that thing. Naturally it's hard to tell in a still image, but I was swinging like crazy. Vicky used all of her brute strength on that bandito plywood. And you know what?
No new damage. Not a single scuff mark.
Day 27.
-
Impressive, Sir. And what will the next 3 days hold? >:D
-
Looks like a little demon in there with those red eyes. :D
-
Can't comment hammer time playing in my head.
-
STOP! Hammer time!

-
Every single thing I was meant to accomplish today got waylaid due to a series of ridiculous errors and thoughtless decisions. Day 27 is getting bumped forward a day.
It would have been hilarious in a TV movie, but in real life my day was dumb as a rock that ate paint chips as a kid.
-
Well that's unfortunate! I hate days like that.
Sent from my MB886 using Tapatalk 4
-
I was obviously tired when I made that post, because not only did it sound super-cranky, but it totally should have read Day 28.
The New Day 28 (which, obviously, is better than New Coke) was, naturally, construction-free (like me!) Instead, it was bike maintenance time!
First up, I had to swap out my bottom bracket. I'll spare you the entire boring process, save for this part:
Normally I would just suck it up and remove the chain with my hand anyway, but I thought, why not? Of course, I later cleaned the chain, which would have totally removed the problem. Oh brother.
Is it getting hook-ish around here, or is it me? I wanted to adjust the forks a bit, and I absolutely had the right hex key for the job. But you know what else I had? Vicky, and a pack of Leatherman flat-profile bits. Therefore, in what I assume was my only real option, I borrowed this idea from Xelkos over in the Hints and Tips thread:
It worked like a charm. Those flat bits fit perfectly in the hook, and as long as you turn the right direction, it all works beautifully. Then, if you want to turn the bolt back the other way, you just load the bit with the hook on the other side, and it's all gravy.
Finally, I wanted some superglue for fixing a cracked wheel reflector (I know they're dorky, but I spend a lot of time in traffic), but my superglue was...well...superglued shut. Scissors to the rescue!

I was going to steal a joke from <u>Robin Hood: Men In Tights,</u> but then I realized it might be a tad less tasteful than I had first thought...I know it doesn't seem like much, but that's Day 28!
-
Good stuff. Looks like Vicky is finishing strong.
-
What is a Huntsman called without the multi purpose hook?
-
This is one of the best reads I've had in a long time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







