A "how-to" for basic SAK mods. Pic heavy.
-
I broke the stickies with my 58mm mod thread...

-
I have a few questions of an ULTIMATE rookie to modding and using tools.
1-What do you mean by "drilling out" the pins?
2-Will a Victorinox file work for "filing(I am not sure I know what it is)" -I mean the file on the metal saw.
-
@TurkTeen said:
I have a few questions of an ULTIMATE rookie to modding and using tools.1-What do you mean by "drilling out" the pins?
2-Will a Victorinox file work for "filing(I am not sure I know what it is)" -I mean the file on the metal saw.
-
Using a power drill with a 2.5mm bit to remove just enough metal to allow the bushing to come free.
-
Yes, a Victorinox file would work fine. "Filing" is just the act of using your file.
Hope that helps, if not just ask and I'll try and explain it better. :)
-
-
What diameter is the tiny pin?
-
Nice write up Gareth
-
-
-
Maybe one could add a small table with the pin stock diameters for the different models/pins.
-
93mm: 3.0mm, 2.5mm (center)
Also, 111mm. I'm not quite sure of those.
-
What diameter is the tiny pin?
On a 91mm SAK? It is 2.2mm.
So the fourth pin, or one without the bushing, is 2.2mm? I thought I remembered it being smaller. **Maybe it just looks that way from not having a bushing. **
I think that's exactly what it is, 'cos it's definitely 2.2mm. :D
-
Just adding some info. On 111mm models with the locking blade from the scale, a scissor spring from any scissors can be cut down and fits and works perfectly. Sorry I dont have any pics but all you do is cut a little off at a time until it fits. Remember to test it before you put the scales back on.
-
@tattoosteve99 said:
Just adding some info. On 111mm models with the locking blade from the scale, a scissor spring from any scissors can be cut down and fits and works perfectly. Sorry I dont have any pics but all you do is cut a little off at a time until it fits. Remember to test it before you put the scales back on.I'm not getting what exactly you're saying.
A spring from any scissors? You mean 91mm etc? And for what? The main blade? -
I guess he is referring to the slide lock and that you can use a shortened scissor spring (not backspring) to replace a lost slide lock spring.
-
Ah, that makes sense.
-
Just adding some info. On 111mm models with the locking blade from the scale, a scissor spring from any scissors can be cut down and fits and works perfectly. Sorry I dont have any pics but all you do is cut a little off at a time until it fits. Remember to test it before you put the scales back on.
I'm not getting what exactly you're saying.
A spring from any scissors? You mean 91mm etc? And for what? The main blade?A 91mm scissor spring for the slide lock models.
Sent from my iPhone using Tapatalk
-
and if you don't have a spare scissor spring in your parts box, I have two 111mm slide locks that are relying on a rubber o-ring to push the lock forward rather than a spring.
-
You guys make this look easy...

It wasn't...Posting my agonizing adventure later today. I need a vise so bad, had to peen while holding the brass for a good while. Eventually I wised up... several hours later.
I'll explain and show photos after I get some rest.
-
If you want a way to hold the brass pin stock in a vice without damaging it, here's a nice trick I learned from a blade maker.
Take 2 pieces of flat brass bar or thick sheet, and put them on either side of a business card or thin carboard. Clamp that in a vice, and then get a drill bit for the size of pin stock you want to hold and drill down the center of cardboard.
The drill will naturally follow the cardboard center. Then wen you remove the cardboard and use the brass halves to clamp the pin stock it will hold nice and tight and wont damage the brass like a flat vice will. Drill holes for all the sizes of pin stock you want to hold.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
