The Dremel (or clone ) Owners Club
-
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

-
The concept is great... wonder what it would take to fully build it though... it doesn't look overly complicated...
-
Im planning on giving a try on the future when i have some spare time. I think the bench could come from something else like a bench drill or something. The biggest challenge would be the research time to make the specs for everything, but the actual building shouldnt take that much.
Also it doesnt have to look that pretty to make it work :D
-
[quote author=MadPlumbarian link=topic=43758.msg744236#msg744236 date=1372524375]
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

[/quote]
Hey I tried! :( how bad did it translate? JR -
I good rule of thumb with those translators is to feed the translation back through and see if it still sounds coherent.
I wonder if there's any more to that project than the 3D renderings. And perhaps it could be passed on if they are no longer interested in it. I'm sure if we could rope in some machining pros we have on board here we could at least build a few prototypes :D
As I see it, the main issue is that it'd be a PITA to switch modes... thus almost requiring you to either keep it always the same, or have multiple versions to be able to switch your Dremel quickly. I know when working on a large project with multiple parts it's easier to do stages and try to do all the similar parts on each tool in groups to save setup time and ensure consistency throughout. I built a inlaid panel chest in school (it was a total overachiever project, and my shop teacher loved me for it) and a lot of the process was running a number of parts through the same setup, changing the settings, doing another pass... a lot of labour but it came out nice in the end considering the time crunch and lack of skill I had at the time.
-
[quote author=enki_ck link=topic=43758.msg744245#msg744245 date=1372525059]
[quote author=MadPlumbarian link=topic=43758.msg744236#msg744236 date=1372524375]
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

[/quote]
Hey I tried! :( how bad did it translate? JR
[/quote]Sorry if you misunderstood it was a joke! it translated fine except as all translators the wording was a bit odd (that was the joke about)
Sorry again if you thought it wasnt funny and if they didnt reply that message it wasnt because of the message but they surely dont check that blog anymore.Ill try to check if there is an email posted somewhere and contact them directly.
-
[quote author=RamoN link=topic=43758.msg746582#msg746582 date=1372986901]
[quote author=enki_ck link=topic=43758.msg744245#msg744245 date=1372525059]
[quote author=MadPlumbarian link=topic=43758.msg744236#msg744236 date=1372524375]
I found this, little drill press and mini lathe, this would be freaking neat to have, but can't get any info off of it, JR
http://img.photobucket.com/albums/v196/mrssabrina/fresar34_zpsf4a90ab2.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear24_zps1c3f345f.jpg
http://img.photobucket.com/albums/v196/mrssabrina/tornear40_zps0a2b205c.jpgHow's your spanish? :D
Seems it was only a concept and never went into production if I understand it correctly. Looks cool though.

That is so very cool
From what it says there it was a homework on a technology subject. They desing it for the dremel because its one of the most popular rotary tools. But yes seems to be just a concept or at least they didnt made any more updates to it. But.... one could try to follow that concept and see what happens...If anyone need help with any spanish translation let me know

Well if you went to the page above, look at the very last person to make a quote at the bottom of the page, someone sitting in a folding chair, behind a van, yes that would be me, lol the mad Plumbarian :D I left a post (I think) I used a language transfer to post asking about it but never got a response, I hope I left a good post since I can't read it! lol JR
So YOU left that lame post

Its ok the message its clear but in awful translator words that could well be said by an indian or a psychiatric pacient :D

(Sorry but it was too tempting)

[/quote]
Hey I tried! :( how bad did it translate? JR
[/quote]Sorry if you misunderstood it was a joke! it translated fine except as all translators the wording was a bit odd (that was the joke about)
Sorry again if you thought it wasnt funny and if they didnt reply that message it wasnt because of the message but they surely dont check that blog anymore.Ill try to check if there is an email posted somewhere and contact them directly.
[/quote]
Oh no, it's fine, notta prob! I was just curious how bad it translated it, no biggie! Let me know what you come up with, JR -
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
The Dremel was one of my favorite tools when I was young, and my favorite powertool I believe. After I burned up my clone though and got real Dremels, I was not using as many tools anymore as the world went software.
I have a hardly used Multipro 395 that still shines, and hords of different bits, cutters, sanders and stuff. I've tried the flex shaft a few times, I love the idea of it, but I found it hard to work with. I need more practice I think.
Today I mainly use cutoff wheels and brushes, and I use them on a Dremel Stylus. I love this little baby for what i do. I liked it so much I bought their mini cordless driver that looks almost the same, the driver is just OK, but my 18V Craftsman was way too big for the small stuff, and it needs a charge before each use because it is so old the batteries self discharge fast. Cordless though is just the way to go if you can.
I've recently updated my power tools so the mini Dremel driver seems very lacking, but still it's very small and uses hex-drive bits so it's still quite useful. If you have not experienced newer cordless Lithium battery power tools, you need to check them out.
Now that they make a stylus type handle attachment for their larger tools I am very tempted to get their 12V Lithium dremel. This thread may just push me to do it.
The instructable posted on the mini saw/router table is fantastic... I really want one of those, I think I have found a project I have to do. I don't have that dremel, but it's adaptable. I'll check for updates to see if anyone has done one with the flex shaft, that would be very cool and allow different dremels and more attachments to be used.
-
;)
There's a lot of cool stuff out there for Dremels

I also have a flexible drive shaft that I use in my polisher, it might be another option for some instead of a Dremel
Something like this one
http://www.amazon.com/Heavy-Duty-Shaft-Keyless-Chuck/dp/B001PTSWJ6 -
@ICanFixThat said:
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.hardly buried, and still rather active thread!
-
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
hardly buried, and still rather active thread!
By burried, I was refering to its location "Forum »Non Tool Forum »Gadget Freak/EDC Forum", but I agree with the way the forum listing flattens the hierarchy it's not really burried. I admit it I don't leave the Swiss forum for more than a few minutes a month and forgot that the tree was artificial.
-
Great Thread! Why is it so burried. Thanks to sparky415 though, I found it from a link.
hardly buried, and still rather active thread!
By burried, I was refering to its location "Forum »Non Tool Forum »Gadget Freak/EDC Forum", but I agree with the way the forum listing flattens the hierarchy it's not really burried. I admit it I don't leave the Swiss forum for more than a few minutes a month and forgot that the tree was artificial.
I miss a lot because I normally hang out where the rust is :)
I'm too easily tempted by the shiny things :ahhh :ahhh
-
@sparky415 said:
.....
I miss a lot because I normally hang out where the rust is :)I'm too easily tempted by the shiny things :ahhh :ahhh
A Dremel makes rusty things, shiny things.

-
I've been using Dremels and clones for years. They're great tools. For anyone who doesn't already know, the collet system sucks. Get a Keyless Chuck to use with all size bits (actually, get a few, as they get sticky after a while). And, Dremel bits at your local hardware store cost a small fortune if you need more than a couple, get bits and stuff from http://www.widgetsupply.com/category/dremel.html I've been buying from them for years. Oh, and be careful if you're new to Dremeling, as you can destroy things very quickly, so practice on kitchen knives or scrap before you try to mod your favorite knives and MTs, and keep your Dremel away from your gun unless you really know what you're doing.
-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

-
Also if you are new to Dremeling wear safety glasses ;)
Those little cutoff disks etc explode :ahhh :ahhh
+1
<-- From a guy who spent one December 31st at the eye doctors getting a metal splinter dug out from his eye.

Ugh, that sent shivers down my spine! I don't do to well with FOD in eyes! I can scrape, cut or pry anything out of arms, hands legs ect, but eyes....

Sent from my iPhone 5 using Tapatalk
-
@sparky415 said:
Also if you are new to Dremeling wear safety glasses ;)Those little cutoff disks etc explode :ahhh :ahhh
Yeah i learnt that little fact but not with a dremel but with a 4 inch angle grinder, suddenly i felt my face bombarded by hard pieces of disc, luckily there was a ninja angel guarding my eyes and i came unschated :P
-
I've got a Dremel 200 and its probably my most used tool. I've used it for everything, even cutting the bead of a motorcycle tire to get it off the wheel more easily. I use it extensively for Glock and other polymer framed handgun modifications, too. I couldn't imagine living without one.
-
Put it to work today for working on a little leather project so I took a quick pic, sorry it ain't the best it was off of the ipad.. JR

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login