The Wood Working Thread
-
Add it to the tab that will be sure to increase! :D 
:D :P I'll let it slide this time, especially since I'm actually at the store and getting paid while I type this. :D One problem with working in a store that's been in town for over 40 years - people recognize you outside of work and ask you questions. When I'm doing my food shopping, I really don't feel like helping you fix the stain on your deck.......
-
Nice work going on in here, Most of my woodwork is held together with nails

but I thought some of you might like to see a simple jig I use when working on doors fitting locks or hinges (I've seen chippys using them over here for years)
They are made from scrap 4x2 (English), 2x4 (American) or 100x50 (European) ;)
(scrap piece of beech worktop to indicate where the door sits)
Hope the picture makes some kind of sense


-
$10???

Add it to the tab that will be sure to increase! :D 
:D :P I'll let it slide this time, especially since I'm actually at the store and getting paid while I type this. :D One problem with working in a store that's been in town for over 40 years - people recognize you outside of work and ask you questions. When I'm doing my food shopping, I really don't feel like helping you fix the stain on your deck.......
You're a good man Tom!!

Yeah, that would probably drive me nuts too. Next time someone asks you something outside of work, just say something dumb like "I love lamp", give them a blank look, then walk away. :D
@sparky415 said:
Nice work going on in here, Most of my woodwork is held together with nails
but I thought some of you might like to see a simple jig I use when working on doors fitting locks or hinges (I've seen chippys using them over here for years)
They are made from scrap 4x2 (English), 2x4 (American) or 100x50 (European) ;)
(scrap piece of beech worktop to indicate where the door sits)
Hope the picture makes some kind of sense

Hmmm, my brain can't seem to figure out how that works...

-
I really like that workstation JR. I really should build a few like that myself. My garage is such a mess right now, it makes me want to cry every time I go into it. :'(
-
@derekmac said:
I really like that workstation JR. I really should build a few like that myself. My garage is such a mess right now, it makes me want to cry every time I go into it. :'(Here's where I got the idea for it, I think it was in Handy magazine but I didn't need any measurements, I just went along with what lumber I had, lol, then I found one of those other workstations, unfortunately they don't make them any more, but I found one, he he! JR


-
I have posted this link before but it may be of use to some in this thread too.
The Janka Hardness Test for Hardwoods
I use it when deciding on scales for a knife.
-
@SupraFreak13 said:
I'll join in...this summer I was house sitting for 3 weeks, a friend and long time wood workers house. He has a large wood shop, so I was able to go to town for a few weeks.Then I went to town on about 8 band saw boxes...here are highlights...


Cedar log with custom shelf/storage


Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :D
-
@Whoey said:
Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :DThanks for the compliments folks. Look up "Bandsaw boxes". They are easy to get creative with once you understand how they're made.
The only major tool needed is a band saw. A palm sander helps for finishing.
-
Well tonight I decided to get the jointer all cleaned up and ready to go. After I got it set, and square, I decided to run a piece through it. Well my hand slipped and in goes my thumb!
It took a nice big slice out of it, but I was able to get it wrapped with lots of pressure on it, and the chunk of skin is still attached. So here I sit in the hospital waiting to get stitches. Oh joy.
Sent from my iPhone 5 using Tapatalk
-
@derekmac said:
Well tonight I decided to get the jointer all cleaned up and ready to go. After I got it set, and square, I decided to run a piece through it. Well my hand slipped and in goes my thumb!It took a nice big slice out of it, but I was able to get it wrapped with lots of pressure on it, and the chunk of skin is still attached. So here I sit in the hospital waiting to get stitches. Oh joy.
Sent from my iPhone 5 using Tapatalk
Ouch! :( That sucks Derek.
-
Dang man, hope everything ends up ok! Hope you feel better.. JR
-
Did you take pictures? >:D
All kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
-
Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :D
Thanks for the compliments folks. Look up "Bandsaw boxes". They are easy to get creative with once you understand how they're made.
The only major tool needed is a band saw. A palm sander helps for finishing.
Yeah... if I had room for a band saw, I'd be set!
-
@enki_ck said:
Did you take pictures? >:DAll kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
I wrapped it up too quick after it happened as there was lots of blood, so no pic there. :D I was going to take one right after the doc finished stitching, but the nurse came in too quickly.
It was my left thumb. It's making doing simple things very annoying.
Oh well, it could have been much worse!!Sent from my iPhone 5 using Tapatalk
-
Thank you derekmac for starting this thread. I hope your thumb heals up to be like new.
I've been away from MTO for several months and away from woodworking for even longer. After seeing some opportunities to make some gifts I decided to get back into the wood shop recently and I stuck my nose back here in MTO and found this thread. Seems like a return to both was meant to be.
Here are some pictures of projects that I competed in the past.
Step stool for our kitchen.

A small box that I sent to my son while he was deployed to Iraq. He now uses it to store his challenge coins.


A tool chest that I made long ago.


Some wine gift boxes from several years ago. I've started working a five of these to have on hand to use as gifts.

My office furniture.

-
Here is a picture that pulls woodworking ant MT's together. Ian Kirby is a master woodworker, author and educator. He uses an SAK with a modified blade tip as a marking knife.
-
Very nice work, MeadMaker.
And welcome back to us.
I was wondering a few days ago where you had disappeared.Very cool looking picture frame too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


