The Wood Working Thread
-
Beautiful work guys! I'm not much of a woodworker myself, have no place for tools at the place I'm renting. :( I sell finishing products for a living though, a lot of my customers are cabinet and furniture shops. If anyone has any wood finishing questions, I'm more than happy to answer them the best I can.
Looks like you guys have that well in hand though..... -
I have been thinking about making my own table base for my table saw, and I want to take the extension wing off of the right side, and use a laminate (or something) top and mount my router in it. In theory, I should be able to use my table saw fence with a piece of sacrificial wood attached to it as a fence for the router too.
I was thinking about trying to use SketchUp to design it, but I haven't really played around with it too much yet. Does anyone here use it?
@jerseydevil said:
Beautiful work guys! I'm not much of a woodworker myself, have no place for tools at the place I'm renting. :( I sell finishing products for a living though, a lot of my customers are cabinet and furniture shops. If anyone has any wood finishing questions, I'm more than happy to answer them the best I can.
Looks like you guys have that well in hand though.....Thanks for the offer Tom! I do happen to have a question for ya. I'm going to be applying a Minwax Red Mahogany stain to the tables, but I'd like to add some sort of protection to the top to stop liquids from soaking into the wood. I was going to use a semi-gloss Polyurethane over it, but was wondering if there's something else you'd recommend?
-
I enjoyed woodworking growing up too, unfortunately I have no space for a workshop here :(
Guess that limits me to smaller projects...
You really do need quite a bit of room to have a half decent setup going. We have a two car attached garage, and even that's really not big enough for what I have, and I still need to get my bandsaw and lathe.
Unfortunately I'm in an apartment building, my garage is communal. The bigger issue is constant cleanup in between stages, sometimes you need to put things down for a bit to do something else, and here that requires cleaning everything up which usually takes more time than you can dedicate to a project, that and the setup time required as well.
I'd love to have a true workshop/private garage off a house... or even a small warehouse in an industrial estate or similar.
I'm with you on the apartment problem, I used to have a small workshop back at our house, nothing big but I made things work, I turned a circular saw into a table saw, router into a full size table, also jig saw and drill to full size. I had to get rid of most tables and full size stuff but kept the must haves, so there sitting in the basement. Only thing that I think went bad is the batteries for the cordless drill, after not chagrin nor using it for so long,,
Here's a few of my projects, JR


My latest, it's a double sided workstation for both my paracord and leather work,






-
Polyurethane is exactly what I'd recommend Derek. If you're doing an oil-based one, give it two coats. If water-based, three coats. The oil will be more durable, but will yellow over time. The water-based won't yellow, and will dry faster as well. After applying the final coat, wait at least 48-72 hours for the poly to cure to full hardness. And always remember - DO NOT SHAKE polyurethane! Stir it! Shaking will put a ton of tiny air bubbles in the finish, and will make it a nightmare. Hope this helps.

That'll be $10, Paypal please..... :P
-
Add it to the tab that will be sure to increase! :D 
:D :P I'll let it slide this time, especially since I'm actually at the store and getting paid while I type this. :D One problem with working in a store that's been in town for over 40 years - people recognize you outside of work and ask you questions. When I'm doing my food shopping, I really don't feel like helping you fix the stain on your deck.......
-
Nice work going on in here, Most of my woodwork is held together with nails

but I thought some of you might like to see a simple jig I use when working on doors fitting locks or hinges (I've seen chippys using them over here for years)
They are made from scrap 4x2 (English), 2x4 (American) or 100x50 (European) ;)
(scrap piece of beech worktop to indicate where the door sits)
Hope the picture makes some kind of sense


-
$10???

Add it to the tab that will be sure to increase! :D 
:D :P I'll let it slide this time, especially since I'm actually at the store and getting paid while I type this. :D One problem with working in a store that's been in town for over 40 years - people recognize you outside of work and ask you questions. When I'm doing my food shopping, I really don't feel like helping you fix the stain on your deck.......
You're a good man Tom!!

Yeah, that would probably drive me nuts too. Next time someone asks you something outside of work, just say something dumb like "I love lamp", give them a blank look, then walk away. :D
@sparky415 said:
Nice work going on in here, Most of my woodwork is held together with nails
but I thought some of you might like to see a simple jig I use when working on doors fitting locks or hinges (I've seen chippys using them over here for years)
They are made from scrap 4x2 (English), 2x4 (American) or 100x50 (European) ;)
(scrap piece of beech worktop to indicate where the door sits)
Hope the picture makes some kind of sense

Hmmm, my brain can't seem to figure out how that works...

-
I really like that workstation JR. I really should build a few like that myself. My garage is such a mess right now, it makes me want to cry every time I go into it. :'(
-
@derekmac said:
I really like that workstation JR. I really should build a few like that myself. My garage is such a mess right now, it makes me want to cry every time I go into it. :'(Here's where I got the idea for it, I think it was in Handy magazine but I didn't need any measurements, I just went along with what lumber I had, lol, then I found one of those other workstations, unfortunately they don't make them any more, but I found one, he he! JR


-
I have posted this link before but it may be of use to some in this thread too.
The Janka Hardness Test for Hardwoods
I use it when deciding on scales for a knife.
-
@SupraFreak13 said:
I'll join in...this summer I was house sitting for 3 weeks, a friend and long time wood workers house. He has a large wood shop, so I was able to go to town for a few weeks.Then I went to town on about 8 band saw boxes...here are highlights...


Cedar log with custom shelf/storage


Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :D
-
@Whoey said:
Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :DThanks for the compliments folks. Look up "Bandsaw boxes". They are easy to get creative with once you understand how they're made.
The only major tool needed is a band saw. A palm sander helps for finishing.
-
Well tonight I decided to get the jointer all cleaned up and ready to go. After I got it set, and square, I decided to run a piece through it. Well my hand slipped and in goes my thumb!
It took a nice big slice out of it, but I was able to get it wrapped with lots of pressure on it, and the chunk of skin is still attached. So here I sit in the hospital waiting to get stitches. Oh joy.
Sent from my iPhone 5 using Tapatalk
-
@derekmac said:
Well tonight I decided to get the jointer all cleaned up and ready to go. After I got it set, and square, I decided to run a piece through it. Well my hand slipped and in goes my thumb!It took a nice big slice out of it, but I was able to get it wrapped with lots of pressure on it, and the chunk of skin is still attached. So here I sit in the hospital waiting to get stitches. Oh joy.
Sent from my iPhone 5 using Tapatalk
Ouch! :( That sucks Derek.
-
Dang man, hope everything ends up ok! Hope you feel better.. JR
-
Did you take pictures? >:D
All kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
-
Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :D
Thanks for the compliments folks. Look up "Bandsaw boxes". They are easy to get creative with once you understand how they're made.
The only major tool needed is a band saw. A palm sander helps for finishing.
Yeah... if I had room for a band saw, I'd be set!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



