The Wood Working Thread
-
:o :o :o
Holy crap that was a bad one. Hope everything heals up properly.
-
@captain spaulding said:
:o :o :oHoly crap that was a bad one. Hope everything heals up properly.
Yeah, wasn't one of my best days in the shop. I think it should heal pretty good. I usually heal really well, and fast, so here's hoping that trend goes with this as well.
I still have feeling in it all, so that should be a good sign. There's also no pain, and hasn't really been any at all since it happened. The absolute worst pain was the first needle for the freezing. :ahhh That hurt like hell!!! The cold also makes it throb some, but it's not unbearable.
-
That does look bad but I'm glad they could fix you up.

I'm very careful near such machinery. Both of my neighbors, one on either side had serious workshop accidents. One cut off 4 of his fingers on a band saw. The doctors managed to reattach them luckily. The other one lost the tip his finger. :-\
Powertools are dangerous. :ahhh
-
I so want this, even though I really don't need it for the amount of tapering I'll do. I'll probably just stick to making my own jigs.
http://www.leevalley.com/en/wood/page.aspx?cat=1,240,45313&p=71460I also need to get a set of these.
http://www.leevalley.com/en/Wood/page.aspx?p=32670&cat=1,310,41069&ap=1@enki_ck said:
That does look bad but I'm glad they could fix you up.
I'm very careful near such machinery. Both of my neighbors, one on either side had serious workshop accidents. One cut off 4 of his fingers on a band saw. The doctors managed to reattach them luckily. The other one lost the tip his finger. :-\
Powertools are dangerous. :ahhh
I'm also usually very careful, and I knew what I was doing was dumb, but I was tired, so I did it anyways.

Yikes, that would be horrible, cutting off four fingers. :ahhh
-
That looks like it hurt just a little bit Derek. :( Glad it was a relatively simple repair. As to missing fingers, I deal with a lot of furniture and cabinet shops at work. There are plenty of guys in and out of the store each week missing a fingertip here, a finger or two there. :o One guy we know was in a few weeks ago and after I boxed up his order I asked him, "Need a hand with that?" His reply was, "No thanks, I've got a hand and a half right here." :P Quite an old injury and he makes light of it, but he scared the next lady on line when he waved goodbye to us with the three fingers on his left hand........ :ahhh I also really do know a one-armed paperhanger, but that's a story for another time..........
-
ouch, hope it all heals! JR -
That photo really made me cringe, since I know what that feels like.
@derekmac said:
I so want this, even though I really don't need it for the amount of tapering I'll do. I'll probably just stick to making my own jigs.
http://www.leevalley.com/en/wood/page.aspx?cat=1,240,45313&p=71460I also need to get a set of these.
http://www.leevalley.com/en/Wood/page.aspx?p=32670&cat=1,310,41069&ap=1I've grown wary of lee valley's catalogs, they must have some of the highest paid writers in industry because they can make crap smells like gold. More than once I've been utterly disappointed by the actual item.
Besides their price is way up there on a lot of items.
-
I could do witout the taper jig, but a good card scraper is very handy to have in the shop. Lee Valley's prices are a bit high, but I've always felt that I've gotten my money's worth on the Veritas tools.
-
@MeadMaker said:
I could do witout the taper jig, but a good card scraper is very handy to have in the shop. Lee Valley's prices are a bit high, but I've always felt that I've gotten my money's worth on the Veritas tools.I noticed they have a bare bones jig for a much better price.
http://www.leevalley.com/en/wood/page.aspx?p=30080&cat=1,41080,51225&ap=1Yeah, they are a bit high, but it's nice to have a local shop that sells all the goodies they do.
Sent from my iPhone 5 using Tapatalk
-
That's another thing that really pissed me off. I have to mail order stuff from them, but at least I didn't pay QST. But then they decided to be a goodie two shoe and made a french website, so now I have to pay both taxes. 11% price hike overnight, and still have to pay shipping. ::)
-
This is something that I would really love to have!!! I don't completely trust the miter gauge that came with my saw, and the sled looks pretty sweet too! I've been looking into the Incra miter gauges, and they seem like they are top quality. I just might have to start working some OT to be able to get myself this! :D
-
Christ, that's more than what I paid for my saw and a bunch of blade. :P
-
@jzmtl said:
Christ, that's more than what I paid for my saw and a bunch of blade. :P:D It's not cheap, but I could see it putting a big smile on my face every time I went to cut something!!
I've been thinking about building my own crosscut and 45 sleds, but haven't gotten around to it yet.
Sent from my iPhone 5 using Tapatalk
-
I made a small crosscut sled, the biggest problem I had was set it to be REALLY square, because the hardware store squares aren't actually 100% square. ::)
-
Apparently wood glue doesn't hold in -20, now you know.
-
@derekmac said:
Hmmm, my brain can't seem to figure out how that works...
I took this today hope it makes more sense

The pointy end of the wedges could be cut back a bit as you tap that end with a hammer when you want to release the door<a href="http://s112.photobucket.com/user/sparky_415/media/2014/Doorjig.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2014/Doorjig.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Makes perfect sense now! Thanks for the pic.

Sent from my iPhone 5 using Tapatalk
-

If you cut the slots and wedges right you can use them to hold fatter or thinner stock ;)
-
If you cut the slots and wedges right you can use them to hold fatter or thinner stock ;)
I really like that!! I have a bunch of wedges from doing tapered cuts, so all I need to do is notch our some 2x4's and I'm set!

-
The G/F wanted a garden table that she could use for potting up plants and be nice enough to use for entertaining but it had to be ‘rustic’
Well as you know rustic is my middle name :D
My stock of rescued wood
<a href="http://s112.photobucket.com/user/sparky_415/media/2015/Table a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2015/Table a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
and old fence posts
<a href="http://s112.photobucket.com/user/sparky_415/media/2015/Table b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2015/Table b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Finished it off today :) and I got to use my new pencil (Thanks Crow
)<a href="http://s112.photobucket.com/user/sparky_415/media/2015/Table c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i112.photobucket.com/albums/n184/sparky_415/2015/Table c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


