The Wood Working Thread
-
Did you take pictures? >:D
All kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
-
Great stuff! I've seen similar stuff at the local craft markets and I love the concepts of these kind of boxes... I'd love to have the tools and time to do something like that for my wife as she LOVES boxes... :D
Thanks for the compliments folks. Look up "Bandsaw boxes". They are easy to get creative with once you understand how they're made.
The only major tool needed is a band saw. A palm sander helps for finishing.
Yeah... if I had room for a band saw, I'd be set!
-
@enki_ck said:
Did you take pictures? >:DAll kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
I wrapped it up too quick after it happened as there was lots of blood, so no pic there. :D I was going to take one right after the doc finished stitching, but the nurse came in too quickly.
It was my left thumb. It's making doing simple things very annoying.
Oh well, it could have been much worse!!Sent from my iPhone 5 using Tapatalk
-
Thank you derekmac for starting this thread. I hope your thumb heals up to be like new.
I've been away from MTO for several months and away from woodworking for even longer. After seeing some opportunities to make some gifts I decided to get back into the wood shop recently and I stuck my nose back here in MTO and found this thread. Seems like a return to both was meant to be.
Here are some pictures of projects that I competed in the past.
Step stool for our kitchen.

A small box that I sent to my son while he was deployed to Iraq. He now uses it to store his challenge coins.


A tool chest that I made long ago.


Some wine gift boxes from several years ago. I've started working a five of these to have on hand to use as gifts.

My office furniture.

-
Here is a picture that pulls woodworking ant MT's together. Ian Kirby is a master woodworker, author and educator. He uses an SAK with a modified blade tip as a marking knife.
-
Very nice work, MeadMaker.
And welcome back to us.
I was wondering a few days ago where you had disappeared.Very cool looking picture frame too.
-
@enki_ck said:
Did you take pictures? >:DAll kidding aside I hope there's no permanent nerve damage. Last time I sliced my thumb I couldn't grip anything properly for a few weeks. Was it the left or right thumb? :-\
Since it doesn't look as bad now, here are a couple of pics.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/0FC4FF0F-D29E-4A74-A469-45C1D9249F61_zpstgxvmlit.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/0FC4FF0F-D29E-4A74-A469-45C1D9249F61_zpstgxvmlit.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/90A8C4D4-F57E-4ABA-AD33-114A2CEAA013_zpseodjifgi.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/90A8C4D4-F57E-4ABA-AD33-114A2CEAA013_zpseodjifgi.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
:o :o :o
Holy crap that was a bad one. Hope everything heals up properly.
-
@captain spaulding said:
:o :o :oHoly crap that was a bad one. Hope everything heals up properly.
Yeah, wasn't one of my best days in the shop. I think it should heal pretty good. I usually heal really well, and fast, so here's hoping that trend goes with this as well.
I still have feeling in it all, so that should be a good sign. There's also no pain, and hasn't really been any at all since it happened. The absolute worst pain was the first needle for the freezing. :ahhh That hurt like hell!!! The cold also makes it throb some, but it's not unbearable.
-
That does look bad but I'm glad they could fix you up.

I'm very careful near such machinery. Both of my neighbors, one on either side had serious workshop accidents. One cut off 4 of his fingers on a band saw. The doctors managed to reattach them luckily. The other one lost the tip his finger. :-\
Powertools are dangerous. :ahhh
-
I so want this, even though I really don't need it for the amount of tapering I'll do. I'll probably just stick to making my own jigs.
http://www.leevalley.com/en/wood/page.aspx?cat=1,240,45313&p=71460I also need to get a set of these.
http://www.leevalley.com/en/Wood/page.aspx?p=32670&cat=1,310,41069&ap=1@enki_ck said:
That does look bad but I'm glad they could fix you up.
I'm very careful near such machinery. Both of my neighbors, one on either side had serious workshop accidents. One cut off 4 of his fingers on a band saw. The doctors managed to reattach them luckily. The other one lost the tip his finger. :-\
Powertools are dangerous. :ahhh
I'm also usually very careful, and I knew what I was doing was dumb, but I was tired, so I did it anyways.

Yikes, that would be horrible, cutting off four fingers. :ahhh
-
That looks like it hurt just a little bit Derek. :( Glad it was a relatively simple repair. As to missing fingers, I deal with a lot of furniture and cabinet shops at work. There are plenty of guys in and out of the store each week missing a fingertip here, a finger or two there. :o One guy we know was in a few weeks ago and after I boxed up his order I asked him, "Need a hand with that?" His reply was, "No thanks, I've got a hand and a half right here." :P Quite an old injury and he makes light of it, but he scared the next lady on line when he waved goodbye to us with the three fingers on his left hand........ :ahhh I also really do know a one-armed paperhanger, but that's a story for another time..........
-
ouch, hope it all heals! JR -
That photo really made me cringe, since I know what that feels like.
@derekmac said:
I so want this, even though I really don't need it for the amount of tapering I'll do. I'll probably just stick to making my own jigs.
http://www.leevalley.com/en/wood/page.aspx?cat=1,240,45313&p=71460I also need to get a set of these.
http://www.leevalley.com/en/Wood/page.aspx?p=32670&cat=1,310,41069&ap=1I've grown wary of lee valley's catalogs, they must have some of the highest paid writers in industry because they can make crap smells like gold. More than once I've been utterly disappointed by the actual item.
Besides their price is way up there on a lot of items.
-
I could do witout the taper jig, but a good card scraper is very handy to have in the shop. Lee Valley's prices are a bit high, but I've always felt that I've gotten my money's worth on the Veritas tools.
-
@MeadMaker said:
I could do witout the taper jig, but a good card scraper is very handy to have in the shop. Lee Valley's prices are a bit high, but I've always felt that I've gotten my money's worth on the Veritas tools.I noticed they have a bare bones jig for a much better price.
http://www.leevalley.com/en/wood/page.aspx?p=30080&cat=1,41080,51225&ap=1Yeah, they are a bit high, but it's nice to have a local shop that sells all the goodies they do.
Sent from my iPhone 5 using Tapatalk
-
That's another thing that really pissed me off. I have to mail order stuff from them, but at least I didn't pay QST. But then they decided to be a goodie two shoe and made a french website, so now I have to pay both taxes. 11% price hike overnight, and still have to pay shipping. ::)
-
This is something that I would really love to have!!! I don't completely trust the miter gauge that came with my saw, and the sled looks pretty sweet too! I've been looking into the Incra miter gauges, and they seem like they are top quality. I just might have to start working some OT to be able to get myself this! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

