Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Stainless Huntsman

Scheduled Pinned Locked Moved The Mod Squad
39 Posts 1 Posters 5.3k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. Stainless Huntsman
Stainless Huntsman
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Syph007 Offline
    Syph007
    Global Moderators
    Posts: 9,842
    Syph007 Offline
    Syph007
    Global Moderators
    wrote on last edited by
    #17 Quote Reply

      @PTRSAK said:
      Cheap carbide drills... Have a look at these.

      Invalid URL

      favicon

      (www.ebay.co.uk)

      they are the ones I use and they are cheap as chips compared to 5 quid each.

      nice range of sizes from 1.55mm to 6.5 in 0.05mm steps. and they aren't crap either.

      Peter any estimate how many holes 1 bit would drill before its spent? I keep shopping around and trying different options, and some bits Ive had break on the first use, others Ive used up to 50 times fine. Ive been working out the cost per hole on various options. :D

      PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

      Modding thread : Here
      Website : WWW.SAKModder.com
      Facebook : SAKModder
      Instagram : robertjlessard
      Youtube : www.youtube.com/robertjlessard

      1 Reply Last reply
      • PTRSAK Offline
        PTRSAK
        Posts: 4,776
        PTRSAK Offline
        PTRSAK
        wrote on last edited by
        #18 Quote Reply

          hard to say, I bought a packet of 10 in 2.35mm to drill out the 2.2mm holes in SAK blades and springs when I couldn't get 2.2mm rod so I could use 3/32.

          I have done quite a lot and only broken one and that was my fault in side loading it.
          The one I an using now is as sharp as it was on the first hole.

          banner

          Merit Badges
          Hacker MTO Tool Scale Changer Birth Year SAK ALOX Colors Level 3 Flashlight Fire Making Ignore
          1 Reply Last reply
          • hiraethus Offline
            hiraethus
            Admin Team
            Posts: 6,969
            hiraethus Offline
            hiraethus
            Admin Team
            wrote on last edited by
            #19 Quote Reply

              @PTRSAK said:
              Cheap carbide drills... Have a look at these.

              Invalid URL

              favicon

              (www.ebay.co.uk)

              they are the ones I use and they are cheap as chips compared to 5 quid each.

              nice range of sizes from 1.55mm to 6.5 in 0.05mm steps. and they aren't crap either.

              I think I'm going to get some of these. I've just broken the two carbide drills I got this afternoon. :'( Two problems: too much runout on the chuck of the pillar drill and too slow drill speed. Need to borrow a dial gauge from work to check the chuck.

              Belt sander worked perfectly though - the fine aluminium oxide belts have given a great finish and the scales have polished up nicely.

              Merit Badges
              Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
              1 Reply Last reply
              • daverobson Offline
                daverobson
                Posts: 723
                daverobson Offline
                daverobson
                wrote on last edited by
                #20 Quote Reply

                  Your belt sander looks just like the type I've been looking for.
                  Could you do me a favour & let me know the make & model details for it.
                  It looks like it's just the right size for the workshop I'm planning to set up in my garage (the car has lost it's home again).

                  Merit Badges
                  ALOX with Scissors
                  1 Reply Last reply
                  • hiraethus Offline
                    hiraethus
                    Admin Team
                    Posts: 6,969
                    hiraethus Offline
                    hiraethus
                    Admin Team
                    wrote on last edited by
                    #21 Quote Reply

                      It's an Axminster: http://www.axminster.co.uk/axminster-hobby-series-aw130bd2-belt-disc-sander . I'm sure you can get the same thing cheaper elsewhere but they've got a store near work and good customer service if it goes wrong. A bit fiddly to change belts and needed some tweaking to get the platen perpendicular to the belt but works nicely. I bought the belts from johnt1102 on eBay: http://stores.ebay.co.uk/Abrasivexpertjohnt1102

                      Merit Badges
                      Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                      1 Reply Last reply
                      • Sparky415 Offline
                        Sparky415
                        Posts: 13,000
                        Sparky415 Offline
                        Sparky415
                        wrote on last edited by
                        #22 Quote Reply

                          Nice looking work :drool:

                          John is a good Guy to deal with for belts :tu:

                          Everything’s adjustable

                          1 Reply Last reply
                          • hiraethus Offline
                            hiraethus
                            Admin Team
                            Posts: 6,969
                            hiraethus Offline
                            hiraethus
                            Admin Team
                            wrote on last edited by
                            #23 Quote Reply

                              @hiraethus said:
                              I think I'm going to get some of these. I've just broken the two carbide drills I got this afternoon. :'( Two problems: too much runout on the chuck of the pillar drill and too slow drill speed. Need to borrow a dial gauge from work to check the chuck.

                              Fixed the run out issues with the chuck on the pillar drill - took the chuck apart and greased the back of the jaws to let them slide smoothly and it's much better now. Still going to borrow a dial gauge and check it properly but it's good enough for now. Just waiting for the carbide drills to arrive and then I can get on with the Huntsman.

                              Merit Badges
                              Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                              1 Reply Last reply
                              • PTRSAK Offline
                                PTRSAK
                                Posts: 4,776
                                PTRSAK Offline
                                PTRSAK
                                wrote on last edited by
                                #24 Quote Reply

                                  Yeah, the carbide drills are very brittle. Any side or bending load and they just shatter like glass.

                                  hint, don't try to use them in a cordless drill.

                                  banner

                                  Merit Badges
                                  Hacker MTO Tool Scale Changer Birth Year SAK ALOX Colors Level 3 Flashlight Fire Making Ignore
                                  1 Reply Last reply
                                  • hiraethus Offline
                                    hiraethus
                                    Admin Team
                                    Posts: 6,969
                                    hiraethus Offline
                                    hiraethus
                                    Admin Team
                                    wrote on last edited by
                                    #25 Quote Reply

                                      Got a little bit more done today. Test fitted all of the final parts (including a no-lanyard opener layer spring and older screwed scissors) after drilling them out to 3mm. Got the layers in the right order this time too:
                                      <a href="https://www.flickr.com/photos/26008756@N08/14264028912/" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3754/14264028912_5c2597b545_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
                                      Need to cut a nail nick in one of the liners for the awl because I've put the Philips in the middle, trim a bit off of the liner between the blades and saw and another little bit off the one between the saw and openers for clearance at the saw tip. Then i just need to make the barrel pins and countersink the scales.

                                      Merit Badges
                                      Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                      1 Reply Last reply
                                      • magentus Offline
                                        magentus
                                        Admin Team
                                        Posts: 21,659
                                        magentus Offline
                                        magentus
                                        Admin Team
                                        wrote on last edited by
                                        #26 Quote Reply

                                          That is looking the business! :popcorn:

                                          'Use the force Harry' - Gandalf

                                          Merit Badges
                                          Hacker Hook User Duct Tape Hobo User Minimal SAK Challenge Ignore SAKMC Santa
                                          1 Reply Last reply
                                          • hiraethus Offline
                                            hiraethus
                                            Admin Team
                                            Posts: 6,969
                                            hiraethus Offline
                                            hiraethus
                                            Admin Team
                                            wrote on last edited by
                                            #27 Quote Reply

                                              I think I'm going to have to scrap the scales. :( I was a bit overzealous shaping the edges and they're smaller than the springs and liners now. I also don't like the way the Phillips works - would have been better if I'd gone for a Phillips opposite the can opener and cap lifter. To make matters worse, instead of using threaded barrel pins I decided to peen the rivets - left too much material on and now it's too tight. Ah well, every day is a school day.

                                              Merit Badges
                                              Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                              1 Reply Last reply
                                              • zoidberg Offline
                                                zoidberg
                                                Posts: 38,161
                                                zoidberg Offline
                                                zoidberg
                                                wrote on last edited by
                                                #28 Quote Reply

                                                  Gutted. You were doing so well. Better to do over and be happy than make do and be left wanting.

                                                  1 Reply Last reply
                                                  • hiraethus Offline
                                                    hiraethus
                                                    Admin Team
                                                    Posts: 6,969
                                                    hiraethus Offline
                                                    hiraethus
                                                    Admin Team
                                                    wrote on last edited by
                                                    #29 Quote Reply

                                                      Yeah, this one was for a friend (who has been waiting very patiently for me to finish it) so had to be right.

                                                      Merit Badges
                                                      Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                      1 Reply Last reply
                                                      • hiraethus Offline
                                                        hiraethus
                                                        Admin Team
                                                        Posts: 6,969
                                                        hiraethus Offline
                                                        hiraethus
                                                        Admin Team
                                                        wrote on last edited by
                                                        #30 Quote Reply

                                                          Right, back on it. Stainless Huntsman is now a G10 Fieldmaster.
                                                          <a href="https://flic.kr/p/owRNox" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5562/14789060315_456d66c6c9_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
                                                          G10 scales drilled, cut and sanded - gone for a matt finish which actually looks really nice. Much easier to work than the stainless - fast to sand but rather smelly. Drilled out the backside phillips and the can opener and did a trial fit. Everything works fine but I need to make some brass washers to go between the tools and the scales. I also need to make the barrel pins - I've managed to source some 3mm OD x 1.6mm ID stainless tubing so hopefully I can just tap it out to M2 for the screws.

                                                          Merit Badges
                                                          Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                          1 Reply Last reply
                                                          • hiraethus Offline
                                                            hiraethus
                                                            Admin Team
                                                            Posts: 6,969
                                                            hiraethus Offline
                                                            hiraethus
                                                            Admin Team
                                                            wrote on last edited by
                                                            #31 Quote Reply

                                                              The stainless tube worked really well for the pivots:
                                                              <a href="https://www.flickr.com/photos/26008756@N08/14801344091/" target="_blank" rel="noopener noreferrer"><img src="https://farm3.staticflickr.com/2923/14801344091_e564eb0af6_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
                                                              Might not look like much but I don't need to drill them out, just cut to length, clean the ends and tap to M2 for the screws.

                                                              Not everything went to plan though:
                                                              <a href="https://www.flickr.com/photos/26008756@N08/14781458816/" target="_blank" rel="noopener noreferrer"><img src="https://farm3.staticflickr.com/2902/14781458816_6650e1dee9_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
                                                              Need to work on my technique for making brass washers.

                                                              Merit Badges
                                                              Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                              1 Reply Last reply
                                                              • PTRSAK Offline
                                                                PTRSAK
                                                                Posts: 4,776
                                                                PTRSAK Offline
                                                                PTRSAK
                                                                wrote on last edited by
                                                                #32 Quote Reply

                                                                  @hiraethus said:
                                                                  Right, back on it. Stainless Huntsman is now a G10 Fieldmaster.

                                                                  G10 scales drilled, cut and sanded - gone for a matt finish which actually looks really nice. Much easier to work than the stainless -** fast to sand but rather smelly**.

                                                                  You should wear a dust mask when sanding CF and preferably sand it wet to keep the dust down even more. BAD stuff to get in your lungs.

                                                                  banner

                                                                  Merit Badges
                                                                  Hacker MTO Tool Scale Changer Birth Year SAK ALOX Colors Level 3 Flashlight Fire Making Ignore
                                                                  1 Reply Last reply
                                                                  • hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    Posts: 6,969
                                                                    hiraethus Offline
                                                                    hiraethus
                                                                    Admin Team
                                                                    wrote on last edited by
                                                                    #33 Quote Reply

                                                                      Yep, dust mask for sure. I'll try wetting it next time too. :tu:

                                                                      Merit Badges
                                                                      Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                                      1 Reply Last reply
                                                                      • hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        Posts: 6,969
                                                                        hiraethus Offline
                                                                        hiraethus
                                                                        Admin Team
                                                                        wrote on last edited by
                                                                        #34 Quote Reply

                                                                          Finished:
                                                                          <a href="https://flic.kr/p/oCjWQL" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3854/14850939252_477d785988_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                          <a href="https://flic.kr/p/oC5XoM" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3905/14848209541_65fc3516ac_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                          <a href="https://flic.kr/p/oAjRuG" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3896/14828288276_9dc2a3199e_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>

                                                                          Not quite what I expected when I started, but I'm happy with the result. If I'd known I was going to peen the scales on I wouldn't have drilled everything to 3mm, but I couldn't get the stainless barrel pins to work properly. Maybe on the next one. Happy with the way the peening went, and the G10 is very forgiving if you mis-hit.

                                                                          Merit Badges
                                                                          Birth Year SAK Mod User Hacker Camping ALOX with Scissors Duct Tape BO Tools Level 1 SAKWiki User ALOX Colors Level 1 Flashlight Traditional Folder Challenge Titanium Santa
                                                                          1 Reply Last reply
                                                                          • ducttapetech Offline
                                                                            ducttapetech
                                                                            Posts: 18,707
                                                                            ducttapetech Offline
                                                                            ducttapetech
                                                                            wrote on last edited by
                                                                            #35 Quote Reply

                                                                              That is a sweet looking Fieldmaster. Bravo!!!

                                                                              That's us mobile.

                                                                              Nate

                                                                              SEND IT!

                                                                              Merit Badges
                                                                              Gun User EDCSource Buyer Photographer Mod User Flashlight Fire Making Outdoor Cook MTO Tool Camping Duct Tape LM Surge Challenge Level 3 Ignore Axe User Chainsaw User Mora User Hacker
                                                                              1 Reply Last reply
                                                                              • Syph007 Offline
                                                                                Syph007
                                                                                Global Moderators
                                                                                Posts: 9,842
                                                                                Syph007 Offline
                                                                                Syph007
                                                                                Global Moderators
                                                                                wrote on last edited by
                                                                                #36 Quote Reply

                                                                                  Nice work! The rivets look better than my hand done rivets. :salute:

                                                                                  PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

                                                                                  Modding thread : Here
                                                                                  Website : WWW.SAKModder.com
                                                                                  Facebook : SAKModder
                                                                                  Instagram : robertjlessard
                                                                                  Youtube : www.youtube.com/robertjlessard

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. Stainless Huntsman
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0