What did you use your Leatherman for today?
-
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
-
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
Thanks my friend [emoji106][emoji41]
Brüder, die Brüdern Helfen
-
today was Leatherman use to the max for a desk pilot like myself.
we are moving offices (short notice, no time to prepare, furniture must go, etc, etc)
so I disassembled 5 interconnected cubicles, 3 storage racks, 2 network racks, with just what I had on me today (Wave, Bit extender, Full Bit kit, Croc, and Cyber-Yeoman)
I was very popular today!!

-
@mrmustard said:
Oh and back on topic, used my Wave to sawI beg your pardon... is the topic not what I used my leatherman for today? That was in fact what I used it for yesterday.
Sent from my KFSOWI using Tapatalk
-
The Rebar and my Solarforce T1 got a good workout the other day.
My reverse lights aren't very bright at night (especially on the farm) so I wanted to sort that out, and I also never have enough light to see in my toolbox when I'm in the back of the truck. So Rebar to the rescue.
I had to take out a bunch of the dash and center console so I could run some wiring down to the back of the truck under the carpet.

I drilled and tapped some holes in my tow bar frame and installed a small 2000 lumen LED bar on it

So now I can see behind me

Then for the boot lighting I used the Rebar to wire up some LED running lights to my boot door circuit. Waaaay brighter now.
The Rebar is perfect for this kind of stuff. The electrical crimpers are VERY useful. They should be standard on all Leatherman models.

-
:D :D :D :D

-
@powernoodle said:
I cut open a couple of 50 pound bags of quick setting concrete mix with my Charge Ti while installing a flag pole. This is the first time I have dumped the dry mix in the hole and then added water, rather than mixing it first. The telescoping poles at www.uncommonusa.com are awesome, btw.Here's a tip I learned during my stint in the building-supply business: When anchoring a post in the ground, center the post in the hole; pour a bag of ready-mix in the bottom; tamp soil into the middle section, then pour another bag of ready mix at the top. Tamp firm. Cover the last bit with soil or sod. The next rain takes care of the rest.
I find that this method makes for a tighter fit, with less movement. Adding water makes things mushy, and it's harder to keep things aligned.
-
Installed a backup camera in my '09 Toyota Corolla. I thought I might be able to do it in the parking lot of the store where I bought it, just in case I needed to buy any additional supplies or tools.
It took a total of 15-20 minutes, and the only tool I needed was my Leatherman Charge. The wireless camera attached behind the license plate with some stickum. The power lead went through a notch I made with the file beside the license plate lamp, which I loosened with the Leatherman screwdriver. It was easy to route the wires and tie-in power from the backup light wires using the included T-taps. The pliers on the Charge were ideal for crimping. The other portion was the mirror/display, which fits over the existing mirror with spring-loaded clamps. The power wire was easy to route around the headliner and into a 12V socket.
That's it, all done. It has been working perfectly for many months ever since. I love the display built into the mirror, because it doesn't take up any extra space. The image only appears in the mirror when you are reversing, and the rest of the time, it functions like an excellent rear-view mirror, with built-in dimming.
-
@Landrew said:
When anchoring a post in the ground . . . pour a bag of ready-mix in the bottom . . . The next rain takes care of the rest."I've heard of that method, and its sounds cool. Certainly reduces labor. But I just like seeing the concrete firm up before my eyes and know for sure that the post (in my case flag pole) was dead plumb before I walked away. With my luck, by the time the concrete set up, my base would be off a couple of degrees and that really gets magnified at the top of a 25' flag pole. I would like to try it sometime, though.
-
@Landrew said:
When anchoring a post in the ground . . . pour a bag of ready-mix in the bottom . . . The next rain takes care of the rest."I've heard of that method, and its sounds cool. Certainly reduces labor. But I just like seeing the concrete firm up before my eyes and know for sure that the post (in my case flag pole) was dead plumb before I walked away. With my luck, by the time the concrete set up, my base would be off a couple of degrees and that really gets magnified at the top of a 25' flag pole. I would like to try it sometime, though.
In my experience if you tamp it firm, it stays put. I use rocks to wedge things tight if I can. I don't like adding water because it seems to make things move.
-
Today I used the Squirt to try and open a clamshell and ended up cutting myself.

-
@CanadianLMfan said:
Today I used the Squirt to try and open a clamshell and ended up cutting myself.
You used the chisel blade then? Was it sharp?
-
Today I used the Squirt to try and open a clamshell and ended up cutting myself.

You used the chisel blade then? Was it sharp?
I don't think it was sharp enough, so then the blade somehow snapped onto my finger. :(
-
Taking a 28 year old swimming pool down..
J

-
-
My desk fan at work seized yesterday. The motor was still working, but the shaft had seized. So, Blast to the rescue. I stripped the motor down, cleaned everything and re-lubed it so the shaft could spin freely again. Works as good as ever now.
I'll probably have to take it apart and re-lube with grease at some stage as I'm just using oil as it's all I had on hand, but it works for now.



-
Used my juice s2 too cut some 6mm rope....and broke the blades back spring
Sent from my iPad using Tapatalk
-
@Sparkydave said:
Used my juice s2 too cut some 6mm rope....and broke the blades back springSent from my iPad using Tapatalk
Another one bites the dust

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
