Small leatherman?
-
@jeremy1517 said:
For the skeletool, is it worth upgrading to the CX model?For me, that mainly depends on how much you dislike the partly-serrated blade. Some people despise them :P (right, Lynn? ;) )
I'm not much of a steel-snob, so I don't care all too much about the fancier steel.
-
@50ft-trad said:
Cap'n, the knives on at least two (or was it three-I'd need to check) squirts didn't **rub **- they actually got caught up, and there was a flat spot on both knife blades and a mark on the scales from doing this. Have you experienced the (fairly common) saw on a juice getting caught up on an awl, so you have to push the saw over so it closes? Same deal here :-\ Closing the knife without pushing it inwards would get caught up everytime.On the small tools, it seems the only thing they seem to get consistently right is the pliers. LM always made a good job of pliers - well, until they made the Rebar - not a fan of those at all as I've said many times. I don't have much faith in LM's smaller stuff at all. Nice designs, but I just haven't got any confidence in them.
I know exactly what you mean about the Juice saw.
I'm not saying your right or wrong in any way. I'm just saying I have not had those bad experiences with the PS, Micra, and Squirt line.
-
Welcome to the forums.

I have not had any problems with the Style, Squirt or Micra tools.
I also dislike combo edges.
I haven't tried the Skeletool CX but do think I would like it.Is the Wave with the removable pocket clip not to your liking?
-
I don't have a pocket clip for the wave yet. I thought I'd like to try something smaller and lighter than the wave.
-
@captain spaulding said:
@50ft-trad said:
Cap'n, the knives on at least two (or was it three-I'd need to check) squirts didn't **rub **- they actually got caught up, and there was a flat spot on both knife blades and a mark on the scales from doing this. Have you experienced the (fairly common) saw on a juice getting caught up on an awl, so you have to push the saw over so it closes? Same deal here :-\ Closing the knife without pushing it inwards would get caught up everytime.
On the small tools, it seems the only thing they seem to get consistently right is the pliers. LM always made a good job of pliers - well, until they made the Rebar - not a fan of those at all as I've said many times. I don't have much faith in LM's smaller stuff at all. Nice designs, but I just haven't got any confidence in them.
I know exactly what you mean about the Juice saw.
I'm not saying your right or wrong in any way. I'm just saying I have not had those bad experiences with the PS, Micra, and Squirt line.
Yeah, for sure
All we can do is relay our experiences. Mine have been bad, yours have been good 
-
@jeremy1517 said:
I don't have a pocket clip for the wave yet. I thought I'd like to try something smaller and lighter than the wave.I almost never carry tools in my pocket, but I've been doing a bunch of home repair stuff and have been pocket carrying my Wave. It is unpleasantly heavy, IMO, so I know where you're coming from. Although, the pocket clip DOES work well, and allows the tool to ride deep in the pocket.
-
A Squirt P4 is my EDC - small and light enough I hardly notice it in my pocket, and zero QC issues. I can't say the same about the PS4 version, I have several of these with a broken scissors spring.
-
@50ft-trad said:
@captain spaulding said:
@50ft-trad said:
Cap'n, the knives on at least two (or was it three-I'd need to check) squirts didn't **rub **- they actually got caught up, and there was a flat spot on both knife blades and a mark on the scales from doing this. Have you experienced the (fairly common) saw on a juice getting caught up on an awl, so you have to push the saw over so it closes? Same deal here :-\ Closing the knife without pushing it inwards would get caught up everytime.
On the small tools, it seems the only thing they seem to get consistently right is the pliers. LM always made a good job of pliers - well, until they made the Rebar - not a fan of those at all as I've said many times. I don't have much faith in LM's smaller stuff at all. Nice designs, but I just haven't got any confidence in them.
I know exactly what you mean about the Juice saw.
I'm not saying your right or wrong in any way. I'm just saying I have not had those bad experiences with the PS, Micra, and Squirt line.
Yeah, for sure
All we can do is relay our experiences. Mine have been bad, yours have been good 
Maybe your just a dodgy LM magnet?

-
If we knew what kind of size you are looking for, it would be a bit easier. If we're down at keyring-size, here's another one that can recommend the Squirt P4. When I first got it, I was actually disappointed; it was way smaller than I thought it'd be, but now it's the only MT I carry when I'm at work, unless I know that I'm for some reason gonna need something bigger. It saves me a lot of trips down to the workshop, to get the "right" tool.
If you're going for something bigger... Well, I would actually recommend the one you already have - get either a pocket clip or a quality sheath for it, and you should be good to go. Admittedly, I've never handled a Wave before, but it's pretty high on my wishlist. Either that, or a Wingman.
If that's still too big... I'd say you need something from the Juice-series. The old Juice-series, that is. The new ones aren't exactly pretty and IIRC the quality has been dropped a notch on the new models.
-
My preference in this department is the Skeletool/CX. Sold my CX to try a Juice, ended up reversing that about a month later.
-
Small with a clip ( tho not a deal breaker )
, I'd also say Skeletool or one of my 2 favorites........ Juice S2 or Squirt P4. The Juice will fit in your 5th pocket and quite literally disappear same with the Squirt. -
@Aloha007 said:
Small with a clip ( tho not a deal breaker )
, I'd also say Skeletool or one of my 2 favorites........ Juice S2 or Squirt P4. ** The Juice will fit in your 5th pocket **and quite literally disappear same with the Squirt.I would say it will fit in some peoples 5th pocket. I have seen people put a Wave in the fifth pocket, but for me a juice will barely fit and get stuck if forced in. Horizontally that is.
-
Fair enough Capt
. -
I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
-
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
Makes sense as not all 5th pockets are same size. I remember someone here who was able to put a mid size LM in theirs. I have some GAP jeans that fit the Juice perfectly and now that I think about it I don't know if its the same in my Carhartts

-
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:D -
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:DAre you referring to the pocket mod I did to my pants a long time ago or are you just being dirty?
:D -
I used to EDC a surge in fifth pocket.
http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=116457;image
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login