CyberTool Lite Field Test and Review (Picture Storm!)
-
I have to admit I'm a bit disappointed Detron! I'd always believed computer stacks were populated by armies of tiny imps doing all the storing and filling,drawing and animating the images :'(
Great review though!
-
that was a very detailed testing. nicely done
-
Great post detron. I also work in IT (primarily as a software developer) and always have mt CT41 in my backpack.
I rarely ever use it as the bit driver is a huge pain to use. Flipping a fat SAK over half a turn at a time with the driver off to a side... Very impractical.
That being said I would recommend the CT to anyone wanting a fat, feature rich SAK, with the caveat that it isn't the perfect tool for every IT job... But you'll thank your lucky stars when you need it and it saves your arse.
I've got a couple of SSD installs to do tomorrow and a dud power supply to swap so the CT will get some use then.
-
Excellent, excellent review mate.

-
Nice review! :)
I would recommend you to get and also carry a Classic SD and/or the Rambler, if you don't have it/them yet, because of the screwdriver tip(s). Those little boys can boldly go and reach those awkward spaces where larger screwdrivers are uncomfortable or impossible to use. I've used my Classic SD a lot for the basic hardware operations inside the regular PCs.
Unfortunately, the SD tip on the nailfile isn't magnetic (as it is on the 58mm combo tool).P.S. I have NEVER encountered the Torx screws as the regular component fixing screws in the standard PCs (the Apple products are a story of their own). Don't know about you guys in the USA/Canada, but all the PC cases and components I've ever encountered in the last 15 years have always used the regular small Philips screws for the basic component fixture inside the case.
The only place where I encounter the Torxes are the HDDs, but I don't need to actually dismantle the HDDs
So for me, the regular Philips screwdrivers have been enough for the simple opening/closing the case and swapping the components. -
@Subterranean said:
Nice review! :)I would recommend you to get and also carry a Classic SD and/or the Rambler, if you don't have it/them yet, because of the screwdriver tip(s). Those little boys can boldly go and reach those awkward spaces where larger screwdrivers are uncomfortable or impossible to use. I've used my Classic SD a lot for the basic hardware operations inside the regular PCs.
Unfortunately, the SD tip on the nailfile isn't magnetic (as it is on the 58mm combo tool).P.S. I have NEVER encountered the Torx screws as the regular component fixing screws in the standard PCs (the Apple products are a story of their own). Don't know about you guys in the USA/Canada, but all the PC cases and components I've ever encountered in the last 15 years have always used the regular small Philips screws for the basic component fixture inside the case.
The only place where I encounter the Torxes are the HDDs, but I don't need to actually dismantle the HDDs
So for me, the regular Philips screwdrivers have been enough for the simple opening/closing the case and swapping the components.PC wise, I agree that the torx are not as common, but I also work on Radios, network racks (with their equipment), and some specialized military systems.
-
Nice review! :)
I would recommend you to get and also carry a Classic SD and/or the Rambler, if you don't have it/them yet, because of the screwdriver tip(s). Those little boys can boldly go and reach those awkward spaces where larger screwdrivers are uncomfortable or impossible to use. I've used my Classic SD a lot for the basic hardware operations inside the regular PCs.
Unfortunately, the SD tip on the nailfile isn't magnetic (as it is on the 58mm combo tool).P.S. I have NEVER encountered the Torx screws as the regular component fixing screws in the standard PCs (the Apple products are a story of their own). Don't know about you guys in the USA/Canada, but all the PC cases and components I've ever encountered in the last 15 years have always used the regular small Philips screws for the basic component fixture inside the case.
The only place where I encounter the Torxes are the HDDs, but I don't need to actually dismantle the HDDs
So for me, the regular Philips screwdrivers have been enough for the simple opening/closing the case and swapping the components.PC wise, I agree that the torx are not as common, but I also work on Radios, network racks (with their equipment), and some specialized military systems.
I know, I read your post. :) The Cybertool is a great secondary/pocket tool for people like you who are dealing with various equipment on a daily basis.
I just happened to see a fair amount of people commenting on the Net they are using the Torx screwdrivers on their Cybertool inside the regular PCs. So I was like "WTF? The Torx drivers for a simple PC maintenance?" That's all.
-
Nice review! :)
I would recommend you to get and also carry a Classic SD and/or the Rambler, if you don't have it/them yet, because of the screwdriver tip(s). Those little boys can boldly go and reach those awkward spaces where larger screwdrivers are uncomfortable or impossible to use. I've used my Classic SD a lot for the basic hardware operations inside the regular PCs.
Unfortunately, the SD tip on the nailfile isn't magnetic (as it is on the 58mm combo tool).P.S. I have NEVER encountered the Torx screws as the regular component fixing screws in the standard PCs (the Apple products are a story of their own). Don't know about you guys in the USA/Canada, but all the PC cases and components I've ever encountered in the last 15 years have always used the regular small Philips screws for the basic component fixture inside the case.
The only place where I encounter the Torxes are the HDDs, but I don't need to actually dismantle the HDDs
So for me, the regular Philips screwdrivers have been enough for the simple opening/closing the case and swapping the components.PC wise, I agree that the torx are not as common, but I also work on Radios, network racks (with their equipment), and some specialized military systems.
I know, I read your post. :) The Cybertool is a great secondary/pocket tool for people like you who are dealing with various equipment on a daily basis.
I just happened to see a fair amount of people commenting on the Net they are using the Torx screwdrivers on their Cybertool inside the regular PCs. So I was like "WTF? The Torx drivers for a simple PC maintenance?" That's all.
Yup, I get more an more cases that require t10/t15 torx for the case (still the same screw thread, so I could replace them).
Usually high end PC Cases but even more so with servers (for example the HP ProLiant server). -
@Etherealicer said:
Yup, I get more an more cases that require t10/t15 torx for the case (still the same screw thread, so I could replace them).
Usually high end PC Cases but even more so with servers (for example the HP ProLiant server).Yep, that's it. The full-administration/networking/workstations/generally-high-end segment of IT has its own specific professional needs/requirements, together with the market trends.
For putting the rare/non-standard screws on the systems where someone could tamper with them by using the common drivers, I understand them completely. But I fear the non-standard screws will soon penetrate into the "everday computing", making the quick self-repairs more difficult to do.
But that's another topic.
Conclusion: the Cybertool rocks.
-
[quote author=detron link=topic=53798.msg928000#msg928000 date=1407119973]
[quote author=derekmac link=topic=53798.msg927997#msg927997 date=1407119865]
I have to say, I am VERY glad you posted it. Thank you!to be honest, I am VERY glad you liked it, probably even more than you are that I posted it
my friend!!What!!!! No multipurpose hook test (i.e. hanging out your SAK with the LED on). ;)
I did the aim-able lamp, where the hook is the stand, but after derekmac hung his SAK out, it just was not as enticing anymore

[/quote]Yeah...D-Mac pulled off the quintessential SAK hang.....perfect "Vic-bagging" form. I smell a new entry at SAKWiki....
[/quote]
Straight baller here!
-
Yup, I get more an more cases that require t10/t15 torx for the case (still the same screw thread, so I could replace them).
Usually high end PC Cases but even more so with servers (for example the HP ProLiant server).Yep, that's it. The full-administration/networking/workstations/generally-high-end segment of IT has its own specific professional needs/requirements, together with the market trends.
For putting the rare/non-standard screws on the systems where someone could tamper with them by using the common drivers, I understand them completely. But I fear the non-standard screws will soon penetrate into the "everday computing", making the quick self-repairs more difficult to do.
But that's another topic.
Conclusion: the Cybertool rocks.
I don't think tamper-proofing is the reason, after all, lots of them have a holder where you will find the appropriate Torx-Screwdriver. I think its more to separate themselves from the mass.
+1 on your conclusion

-
I think I should point out that I did not use 36 pictures that I had taken during this test. ::)
-
Good stuff there detron

I'll add that I don't care for the lights on those but I love my CT41 for all it offers.
-
I agree the LED light on this SAK is not that bright, but if it is all you have (NOT LIKELY, but whatever) it will illuminate things enough to distinguish what is what.
as a person who loves having the Mag glass, the LED light is a nice tool to be opposite the Mag glass.
on my main carry (Cyber-Yeoman) I have a Phillips opposite the mag glass., but this is not a common factory model.
the reason I love the CT Lite is for a factory model, I get the Bit Driver, mag glass, pliers, scissors, openers, blades, etc.
the light is an extra, if I did not love the Mag Glass, then I would have been happier with a CT34 or CT41
-
I don't really care for a wood saw but a file I desire very much. Vic files are great not only for their filing abilities but for cutting hard materials such as metal. Incidentally, this is another reason I never cared the Farmer. I'd like to see more Vics with files instead of saws.
-
@sawman said:
I don't really care for a wood saw but a file I desire very much. Vic files are great not only for their filing abilities but for cutting hard materials such as metal. Incidentally, this is another reason I never cared the Farmer. I'd like to see more Vics with files instead of saws.YEP, notice the lack of saw here, but a newer file :D
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.
funny that you sawman feel this way

-
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

