CyberTool Lite Field Test and Review (Picture Storm!)
-
@Etherealicer said:
Yup, I get more an more cases that require t10/t15 torx for the case (still the same screw thread, so I could replace them).
Usually high end PC Cases but even more so with servers (for example the HP ProLiant server).Yep, that's it. The full-administration/networking/workstations/generally-high-end segment of IT has its own specific professional needs/requirements, together with the market trends.
For putting the rare/non-standard screws on the systems where someone could tamper with them by using the common drivers, I understand them completely. But I fear the non-standard screws will soon penetrate into the "everday computing", making the quick self-repairs more difficult to do.
But that's another topic.
Conclusion: the Cybertool rocks.
-
[quote author=detron link=topic=53798.msg928000#msg928000 date=1407119973]
[quote author=derekmac link=topic=53798.msg927997#msg927997 date=1407119865]
I have to say, I am VERY glad you posted it. Thank you!to be honest, I am VERY glad you liked it, probably even more than you are that I posted it
my friend!!What!!!! No multipurpose hook test (i.e. hanging out your SAK with the LED on). ;)
I did the aim-able lamp, where the hook is the stand, but after derekmac hung his SAK out, it just was not as enticing anymore

[/quote]Yeah...D-Mac pulled off the quintessential SAK hang.....perfect "Vic-bagging" form. I smell a new entry at SAKWiki....
[/quote]
Straight baller here!
-
Yup, I get more an more cases that require t10/t15 torx for the case (still the same screw thread, so I could replace them).
Usually high end PC Cases but even more so with servers (for example the HP ProLiant server).Yep, that's it. The full-administration/networking/workstations/generally-high-end segment of IT has its own specific professional needs/requirements, together with the market trends.
For putting the rare/non-standard screws on the systems where someone could tamper with them by using the common drivers, I understand them completely. But I fear the non-standard screws will soon penetrate into the "everday computing", making the quick self-repairs more difficult to do.
But that's another topic.
Conclusion: the Cybertool rocks.
I don't think tamper-proofing is the reason, after all, lots of them have a holder where you will find the appropriate Torx-Screwdriver. I think its more to separate themselves from the mass.
+1 on your conclusion

-
I think I should point out that I did not use 36 pictures that I had taken during this test. ::)
-
Good stuff there detron

I'll add that I don't care for the lights on those but I love my CT41 for all it offers.
-
I agree the LED light on this SAK is not that bright, but if it is all you have (NOT LIKELY, but whatever) it will illuminate things enough to distinguish what is what.
as a person who loves having the Mag glass, the LED light is a nice tool to be opposite the Mag glass.
on my main carry (Cyber-Yeoman) I have a Phillips opposite the mag glass., but this is not a common factory model.
the reason I love the CT Lite is for a factory model, I get the Bit Driver, mag glass, pliers, scissors, openers, blades, etc.
the light is an extra, if I did not love the Mag Glass, then I would have been happier with a CT34 or CT41
-
I don't really care for a wood saw but a file I desire very much. Vic files are great not only for their filing abilities but for cutting hard materials such as metal. Incidentally, this is another reason I never cared the Farmer. I'd like to see more Vics with files instead of saws.
-
@sawman said:
I don't really care for a wood saw but a file I desire very much. Vic files are great not only for their filing abilities but for cutting hard materials such as metal. Incidentally, this is another reason I never cared the Farmer. I'd like to see more Vics with files instead of saws.YEP, notice the lack of saw here, but a newer file :D
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.
funny that you sawman feel this way

-
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most. -
@neillcurrie said:
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most.PM inbound
-
Thank you for such detail write up and pictures, I felt I just lived thru a day via your Vic!

And why did I think of Bender in Futurama when I see the reflection in the hard disk? :D
-
Great review
Now I want a Cibertool

I'm in IT so why did'nt I have a CT?

-
You be pimpin' dat cybertewl

-
Wow
Now this is a photo heavy thread. :D
I'll report back in a week when I'm done viewing it all. ;)
-
I figured "Picture Storm" was a fitting label

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

