CyberTool Lite Field Test and Review (Picture Storm!)
-
@sawman said:
I don't really care for a wood saw but a file I desire very much. Vic files are great not only for their filing abilities but for cutting hard materials such as metal. Incidentally, this is another reason I never cared the Farmer. I'd like to see more Vics with files instead of saws.YEP, notice the lack of saw here, but a newer file :D
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.
funny that you sawman feel this way

-
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most. -
@neillcurrie said:
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most.PM inbound
-
Thank you for such detail write up and pictures, I felt I just lived thru a day via your Vic!

And why did I think of Bender in Futurama when I see the reflection in the hard disk? :D
-
Great review
Now I want a Cibertool

I'm in IT so why did'nt I have a CT?

-
You be pimpin' dat cybertewl

-
Wow
Now this is a photo heavy thread. :D
I'll report back in a week when I'm done viewing it all. ;)
-
I figured "Picture Storm" was a fitting label

-
@detron said:
I agree the LED light on this SAK is not that bright, but if it is all you have (NOT LIKELY, but whatever) it will illuminate things enough to distinguish what is what.as a person who loves having the Mag glass, the LED light is a nice tool to be opposite the Mag glass.
I'm going to respectfully disagree here. I found the LED to be virtually useless. The problem I had with my Cybertool Lite was that the switch kept going on it my pocket. I'd usually burn through batteries in no time at all. When I needed the light much more often than not the batteries were either dead or so close to dead that the already dim light was useless.
I really wanted to to love the light... and I think they did a VERY good job of putting in inline with the bit driver so you could use it to illuminate where you were putting the screw driver... but the dim LED along with a poor switch design made it unreliable... and therefore useless for me.
on my main carry (Cyber-Yeoman) I have a Phillips opposite the mag glass., but this is not a common factory model.
Is it standard on any model?
the reason I love the CT Lite is for a factory model, I get the Bit Driver, mag glass, pliers, scissors, openers, blades, etc.
Can't disagree with anything there. All great tools, all things I use regularly.
the light is an extra, if I did not love the Mag Glass, then I would have been happier with a CT34 or CT41
My main carry is a modified CT. It has (among other things) the phillips against the mag glass. Not strictly needed as the bit driver has a large(ish) phillips, but it's nice to have a big thick one to really apply some torque on stuck big screws.
-
@detron said:
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.
Hey... that's looks a LOT like my custom knife! The only difference is that I have a watch opener blade and a combo tool opposite the two main blades. And I took out the layer with the openers... oh, and I added a fish scaler.
-
Here is my modded one thanks to Detron and GigaHz. Thanks again guys!

Its just a CT34 with the mag/philips layer added. I thought about a "lite" layer at one time but dont really like them and I have a seperate AAA light that to me works better.

-
-
@Etherealicer said:
Great write-up Detron
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough
Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?

No
, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :PI regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment
).maybe you have to cut a hole in the wall for Ethernet ports? Lol
-
Great write-up Detron
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough
Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?

No
, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :PI regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment
).maybe you have to cut a hole in the wall for Ethernet ports? Lol
We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :P
Its also the reason why we love wireless, far easier.
-
@Etherealicer said:
We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :PYeah, wood saw is pretty useless in that situation. I put a fish scaler in my custom knife though cause this makes a really great poking tool.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
