Jeep light install
-
Pretty cool looking Grant!

-
@Grant Lamontagne said:
If you think they look great in photos and video, wait till you see them in real life. :DThat sounds like a great idea- you can always use more light in the cargo area. I love the LED's- you are right, they are much brighter with a fraction of the power consumption, plus they never blow.
The incandescent bulbs bug me. The minute they blow i go to the nearest Canadian Tire, buy a two pack of bulbs, install one, put the other in the glove compartment and forget its there by the time the opposite one blows, at which point I repeat the process. I have to assume that there's a huge profit in people buying extra bulbs or manufacturers would have made the change to LED's long ago.
Def
Sent from a digital multitool
Can't wait to see them. Think you'd be able to make it Saturday for the Renfrew run? It's a nice easy trail with good spots to play!
I've been thinking about replacing all the bulbs in the Jeep with LED ones. It really won't cost that much to do, and everything will be brighter, thus making the Jeep easier to see in bad weather.
-
I don't know if I'll make it on Saturday. I think I've been on Renfrew, I can't remember. I have a lot of work to do in the apartment upstairs and to be honest, I haven't been at it nearly as much as I should have been.
Amusingly enough I was at the dealer today and got talking to one of their technicians who has a 2 door Rubicon and I think he's going to buy a set of LED fog lamps off me. It's not often you go to a dealer and sell them parts! :D
Def
-
While not part of the LED light install, the air deflector I bought finally came in. It's a MOPAR part so it actually has Jeep molded into it- as if that matters... :P
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-30_15-11-49_774_zps6b52f54e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-30_15-11-49_774_zps6b52f54e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The part that bugged me is that this one required drilling holes in the underside of my hood to mount it. Given how quickly things rust here I have no desire to expose any metal unless absolutely 100% necessary, and I don't consider an air deflector even close to being absolutely necessary. I managed to get some nice heavy duty 3M double sided tape, although to be honest I was doubting the physics of four square inches of tape holding this thing on.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-30_15-11-09_900_zpsd2480d5a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-30_15-11-09_900_zpsd2480d5a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It actually holds on surprisingly well, and when the hood is closed the deflector is sandwiched between the grille and the hood and held in place by the weatherstripping that lives there, so it's actually quite solid.
Not exactly involved technical work or anything, but I did use my Vic Compact scissors to cut the tape to fit! :D
Def
-
Not an update really, but I did manage to find this product page for the small lights I put on the windshield.
Apparently they are 1200 lumens each.
Def
Sent from a digital multitool
-
As if there weren't enough photos of my grille in this thread already, here are some more! :D
The weather warmed up a bit today so I made another change to my Jeep. I wanted clear lenses on the marker lights so when I noticed the 2014 models had them I ordered replacements. Here's a photo of it earlier:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-30_15-11-49_774_zps6b52f54e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-30_15-11-49_774_zps6b52f54e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And here it is now:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140309_155347_zps5cy5woku.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140309_155347_zps5cy5woku.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
There are orange bulbs in there too, so they still flash orange, just they are clear when not lit up. I'll be ordering a similar set for the side marker/signal lights later on.
Def
-
It looks better.
that's us mobile
-
Thanks. I think so too.
Def
Sent from a digital multitool
-
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.
-
Wow, those clear lights really do look a lot better than the orange!

-
@hrvstmn31 said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.
I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
Makes sense why pay for what's free and if I recall they're not cheap.
-
They aren't expensive if you order them online. You can buy them locally at places like Costco and Home Depot, and they still aren't really expensive, but they are several times what you pay when you order them from China on eBay or DX, so you don't want to buy local if you need a lot of them. The guy that did the install does this kind of work as a personal business, so we went with what he had. I think he had blue (big no no here since blue is reserved for Police only), red (also a big no no- you don't want to get caught with red lights on the front of a vehicle), green and pink, and so green was the choice- plus, as I said, my boss already had green and liked it, so that's what we went with, for uniformity in the company. My boss liked to differentiate us from everyone else on site, and for a while we did have blue strobes, which got him in trouble a couple of times when he forgot to turn it off when leaving the job site! :ahhh
Def
-
I never really understood that whole changing turn signals to clear covers and coloured bulbs... I'd seen them do it a few times on land rovers on wheeler dealers as "updating the look" and I agree it does look good in your case... makes you wonder what they were thinking to put the orange ones on the previous year...

-
The reason they put orange lights on it is simple- that's what they've always done.
Def
-
Looks good, so are you switching all lights to led? JR
-
That's the plan. These are incandescent at the moment, as that is what the replacement lights came with.
Def
-
I really like what you've done because it all looks so neat.
So often you see 4x4s with loads of silly lights all over the place looking completely ridiculous but you've got a functional and good looking solution.
-
You mean like this one?

:D
Seriously, this is probably all the lighting I will do on this Jeep. I might do some other minor things, but I'm not going to put an external frame on the windshield and mount more lights on it like some guys do.

I'm not that afraid of the dark! :P
As it is, the LED windshield lights are more flood than spot, so they really illuminate the hood more than I'd like or need. I will probably do a similar light setup on my TJ, except that I will mount the LED lights on the bumper (where it currently has fog lights) and put something more spot-light-ish on the windshield brackets so I don't get as much reflection from the hood.
I did however order an interior LED kit today, to replace the interior lights. They will look like the ones in my friend Alex's video:
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login