Jeep light install
-
@hrvstmn31 said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Maybe I just missed it but why green I usually see yellow and orange as safety strobes.
I would have preferred orange (amber) but the guy doing the install didn't have orange LED strips. Also, my boss who paid for most of this had green installed on his and liked it, so that's what we went with.
Def
Sent from a digital multitool
Makes sense why pay for what's free and if I recall they're not cheap.
-
They aren't expensive if you order them online. You can buy them locally at places like Costco and Home Depot, and they still aren't really expensive, but they are several times what you pay when you order them from China on eBay or DX, so you don't want to buy local if you need a lot of them. The guy that did the install does this kind of work as a personal business, so we went with what he had. I think he had blue (big no no here since blue is reserved for Police only), red (also a big no no- you don't want to get caught with red lights on the front of a vehicle), green and pink, and so green was the choice- plus, as I said, my boss already had green and liked it, so that's what we went with, for uniformity in the company. My boss liked to differentiate us from everyone else on site, and for a while we did have blue strobes, which got him in trouble a couple of times when he forgot to turn it off when leaving the job site! :ahhh
Def
-
I never really understood that whole changing turn signals to clear covers and coloured bulbs... I'd seen them do it a few times on land rovers on wheeler dealers as "updating the look" and I agree it does look good in your case... makes you wonder what they were thinking to put the orange ones on the previous year...

-
The reason they put orange lights on it is simple- that's what they've always done.
Def
-
Looks good, so are you switching all lights to led? JR
-
That's the plan. These are incandescent at the moment, as that is what the replacement lights came with.
Def
-
I really like what you've done because it all looks so neat.
So often you see 4x4s with loads of silly lights all over the place looking completely ridiculous but you've got a functional and good looking solution.
-
You mean like this one?

:D
Seriously, this is probably all the lighting I will do on this Jeep. I might do some other minor things, but I'm not going to put an external frame on the windshield and mount more lights on it like some guys do.

I'm not that afraid of the dark! :P
As it is, the LED windshield lights are more flood than spot, so they really illuminate the hood more than I'd like or need. I will probably do a similar light setup on my TJ, except that I will mount the LED lights on the bumper (where it currently has fog lights) and put something more spot-light-ish on the windshield brackets so I don't get as much reflection from the hood.
I did however order an interior LED kit today, to replace the interior lights. They will look like the ones in my friend Alex's video:
Def
-
Now don't pick on your boss Def!

-
He was asked once, at noon on a sunny day to turn his lights off on a work site because he was blinding people. Seriously.
Def
-
My clear signal lights arrived a couple of days ago, and I was pretty excited to install them.

That is, until I found out that I have to take half the bloody fender apart to do it!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
What a pain in the arse. I guess I'll wait until the nicer weather to do it, and probably also do the signal light mod as well. One of the dumb things about these marker lights on the fender is that they really don't do anything, but with a small modification (one wire or two, depending on how you do it) you can get them to flash with (or opposite) the signal on the front. To me it makes more sense to have a signal that flashes on the side as well as the front, but for some reason the folks at Dodge didn't think this was necessary. ::)
Luckily it's an easy enough fix!
Def
-
Can't wait to see the new ones on it.
that's us mobile
-
Nicer weather? Oh come on, this is spring! You don't get nicer weather!
lol, heck we got snow yesterday,, JR -
@MadPlumbarian said:
Nicer weather? Oh come on, this is spring! You don't get nicer weather!
lol, heck we got snow yesterday,, JRWe are experiencing what all the weather outlets are saying is going to be the worst storm in ten years, with 70mph winds and about a foot and a half to two feet of snow.
If you want to go out and crawl around under a truck in that and play with wiring, by all means, go for it. I'm going to stay inside, drink hot chocolate and watch TV until the power goes out. :P
Def
-
seeing as it's a storm... shouldn't you be standing around for hours at autoport? :P
-
I would, but no one is coming to visit and I'm not in Chicago!

Def
-
The interior LED kit arrived the other day and I haven't had much of a chance to do much with them yet. The worst part is, there are twelve "bulbs" but no identification for each. According to the seller the set includes the following:
Front Dome Light X 1
Front map lightsx2
Vanity Mirror Light X 2
Golve Box Light X 1
Under Dash Light X 2
Trunk Light X 2
License Plate Light X 2
But, they don't tell you which ones are which, which I find annoying. I have identified the map reading lights so far, which are the ones on the first crossbar, just above the driver and passenger seats. I had a quick look at them while waiting for labor on a job this morning, and figured out which set of LED's should replace them. Here is the BEFORE photo:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140405_093919_zps27db7d08.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140405_093919_zps27db7d08.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
These are the standard incandescent bulbs that come with the Jeep. Here is the comparison after I replaced the first bulb:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140405_210437_zps3e1c3bd8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140405_210437_zps3e1c3bd8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I didn't bother trying to get a photo once both were replaced because all you'd see are just bright white lights! :ahhh
Two down, ten more to go....
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
