3D Printer Blog
-
I'm looking into a 3D printer now. :ahhh
I was looking at the Ender 5, but that seems to be a bit of a neglected black sheep for some reason, in favour of the upgraded versions of the Ender 3 such as the Ender 3 V2 and alternatives from other companies. I'm curious as to why that is. ??? -
The 5 is a good machine...but the 3 usually beats it in price. I read folks having issues with the build platform slipping down during printing on the 5 as well. The 5 is sturdier, but the 3 is also rock solid.
If I had to do this again, I would buy the CR 6 SE. I did have a lot of fun upgrading both of my 3s though.
-
After more research I realized that the ender 5 might be smoother in printing some things, but it mostly does what the ender 3 can do with a less bulky frame. The ender 3 already looks huge. :o
So that leaves out the ender 5, and now am looking at all three versions of the ender 3.Of which, the ender 3 Pro seems to offer the best balance of upgraded design Vs increased cost. Does that seem about right?

Why would you go with the CR 6 SE instead?
I'm interested in any printers that might be better than the Ender 3 for whatever reasons. :) -
Ender 3 and Ender 3 Pro are almost the same machines. The Pro will net you a better power supply and a thicker Z rail. I have both and can't really see any differences due to that more stable Z rail. The updated Ender 3 are nice. What Creality did was to look at what people were doing upgrading their Ender 3, and included some of those upgrades to get the version 2. After looking at the version 2 closely, I was better upgrading things a little here and there. Not only was it fun to do so, but some of those third party upgrades are better built than what Creality gives you. If you read this thread, you will have a very good idea of what you can do with the Ender 3/Pro as far as third party upgrades.
The Ender line is their entry level series. The CR is a step above. The CR 6 SE gives you a bit more niceties...the biggest is automatic leveling. Dual Z axis timing belts is a bigger improvement over the wider Z stability bar on the Ender 3 Pro. I would think that having built in automatic leveling is a great idea.
Either way, you cannot go far wrong with a Creality no matter what you get down the road.
-
So I've settled on an Ender 3 Pro (I think.... ::) ).
Now to find out if there's anything that I'd want to upgrade pronto. I can live with leveling and using the screen and such being a bit fiddly, I think.
And if I read the interwebs correctly, Ender 3's come with 32 bit boards now. :ahhhSo that leaves printing filament guides?

-
That is good. I was going to suggest the biggest bang for your buck was to upgrade the motherboard that runs quieter.
-
It arrived!

I spent Saturday building it.
Veeery carefully. :ahhh Followed a video, making sure that everything was as squared and parallel as I could.But you can see where I am with printing so far.

More bed leveling or do I need a glue stick?
I'll include the better bed springs in my next order, btw.

I don't want to level all the time.
.jpg)
.jpg)
-
That is why I suggested the CR 6 SE. All I can say...once you get the hang of manual leveling...it does get easier. Get yourself a glue stick. Also get yourself a glass build plate.
I am excited for you. Watching a 3D printer working great is one of those fascinating things that gives the viewer a deep sense of satisfaction.
You probably already know this web site...but if not...
-
I got a glass bed with the printer. :) That's why I needed the glue stick, I guess.
So I went and cycled to a shop, now I have some glue sticks.

Printing a Benchy now! This is supposed to expose problems with the printer settings, right?
.jpg)
-
I have never printed one, but yes.
-
Make sure to do the extruder calibration as well. https://all3dp.com/2/ender-3-calibration-how-to-calibrate-your-ender-3/
-
Thanks for the heads-up.

I'll do it once my proper 1kg spool of PLA arrives in the post.This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints ::) ).

The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer. :o
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm. :P
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh
But if I try to adjust it to be better, I bet I'll manage to mess it up.
0.07mm too short doesn't sound too bad anyway..jpg)
-
@Don Pablo said:
Thanks for the heads-up.
I'll do it once my proper 1kg spool of PLA arrives in the post.This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints ::) ).

The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer. :o
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm. :P
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh
But if I try to adjust it to be better, I bet I'll manage to mess it up.
0.07mm too short doesn't sound too bad anyway.Nice start! I like the boat!
Just try not to pablo it...

-
-
@pfrsantos said:
Just try not to pablo it...

I haven't shown the prints that went smurfed up and were binned on the first layer.

-
That looks good.

-
I guess I’ll bump this page, our son bought me a Ender 3, 3D printer for Xmas and I don’t have the slightest clue how these things work? Supposedly I’m going to be spending a few hours putting this thing together before I get to the next step but I have no clue as to what that is,,
JR
-
Congratulations on getting one. Once you get it built, I think you will have a lot of fun with it. Just be sure to watch the videos from the start of this thread, and if you read all of this, you should get a nice feel on what you can do with it, and more importantly, how to upgrade it as you get better with your Ender 3.
-
Thanks, I just spent 25min watching an assembly video and another 20min quickly going through this post from the beginning, I’m still stumped, I have no clue what I’m going to print once I get this thing built, well besides another mini model tool, maybe something to hold displayed sak’s, didn’t someone on here come up with something unique? Something for diff layered sizes? Idk I won’t be at this for a while, I never have time..
Here’s the tool that I got made some time ago, but I think it’s just too big so I want the same thing but in a smaller scale maybe in two diff smaller sizes, like half and also 1/3 or 1/4, I guess we’ll see..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:strip_icc()/pic6040737.jpg)