Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.9k Views
  1. Home
  2. Tool Talk
  3. Reviews
  4. EDC Bit Ratchets
EDC Bit Ratchets
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunch Offline
    ReamerPunch
    Global Moderators
    Posts: 12,187
    ReamerPunch Offline
    ReamerPunch
    Global Moderators
    wrote on last edited by ReamerPunch
    #75 Quote Reply

      Titan Swivel Head micro ratchet

      Weight: 78g
      Length: 110mm with driver at 180° (105mm with driver at 90°)
      Head width: 23mm
      Head clearance with standard bit: 38mm (adds 13mm)
      Teeth count: 90
      Minimum swing arc: 4°
      Bit retention: magnet
      In-line driver: yes (swivel head)
      Bit material: Chromium-Vanadium steel
      Handle material: Chromium-Vanadium steel
      Price: $17 with two bits
      Bits: Stubby Phillips #1 and #2

      Accessories
      The Titan swivel head ratchet comes with two stubby Phillips bits. The bits tend to cam out easily. It was much more efficient to use other standard bits with the ratchet than the two it came with.

      Dimensions
      At 78g, this is the heaviest ratchet yet. Not exactly heavy enough to build your biceps, but it will definitely be noticed in a pocket or pouch. This ratchet is also quite long. With the ratcheting head at 90° the ratchet measures 105mm, but the bit socket will protrude to the side quite a lot. The socket can of course be turned to 180°, but then the ratchet is 110mm long.

      The head is 23mm wide, due to the forked end of the body holding the ratchet head. This may interfere with reaching into things.
      Because of the swivel head design, the switch is also on the back of the ratchet head. The head adds 13mm to the length of a bit. This may also interfere with trying to fit the head into tight spots.

      Teeth Count
      The Titan has 90 teeth, which give an impressive four degree minimum swing arc. This is the highest teeth count yet, and will allow the ratchet to turn fasteners with minimum swinging.

      Bit Retention
      Bits are held in place with a magnet, which is extremely strong. Standard stubby bits are not easily removed from the driving socket, despite it being rather shallow.

      Bit compatibility
      Standard stubby bits are difficult to remove. The driving socket is too shallow for double-ended bits to engage and be turned.

      Switch action
      The switch on this is unlike anything so far. The entire back plate of the ratchet head is the switch. It has a raised shape to allow it to be gripped and turned. This is not ideal, and makes it just a little tiresome to turn the switch.
      The whole thing twists along with the ratcheting bit driver socket. There are no indicators as to which position has been selected and which direction it has to be turned towards to change settings. It is easy enough to find out, but it becomes tedious to have to check every time.

      I usually press against the back of a ratchet head with my thumb, to improve control and keep the bit in the fastener. This is not possible with the Titan, since the whole back plate is the switch. Pressing against it prevents the ratcheting driver from spinning.

      Ease of use
      The body has some knurling to aid with grip when driving in-line.
      The tool has a decent length to provide good torque. The 90 teeth allow for a four degree minimum swing arc.
      The swivel head allows for many different angles of driving fasteners. All other ratchets so far have been right-angle.
      The Titan can also drive in-line, although a fixed in-line driver that many ratchets offer is quite preferable.
      The switch is not ideal, as it prevents users pushing on the back of the ratchet head, and has no way of indicating the selected position and which way it has to be turned. And it is not even easy to turn to begin with.
      The head is quite wide, and it adds 13mm to a bit's length, which is the most we have seen so far.

      Driving in-line does not provide much torque for tight screws. Having it at a right angle provides more torque and stability, but this defeats the purpose of the swivel head ability.

      The major issue with the Titan swivel head is that the swivel head is not locking. When driving at a right-angle, or close to a right angle, the swivel head tends to fold. It is almost impossible to turn tight fasteners with one hand, like with fixed-head ratchets. When driving in-line, this is even more apparent, as the swivel head will start bending, until the bit cams out of the fastener. This is less of an issue with bits that have tight fitment into fasteners, like Allen bits, but since Phillips #2 is the most common fastener in most places, the issue still remains.

      Construction Quality
      The ratchet is well-made. The finish is consistent. The swivel head pivots around nicely and is quite tight. The knurling is effective. There are a couple of dents on the edges of the tool, and the ratchet back-plate seems a little roughed up, but it still looks and feels like a quality tool.

      Portability
      Not as streamlined as most ratchets we have seen. The head is wide and the driving socket protrudes a little. It can be turned to 180°, but then the tool becomes longer. It is also the heaviest yet, at 78g. The main body is still thin enough to fit in the usual sleeves and pouches.

      Value
      At $17, this is arguably expensive for what it is. It only came with two mediocre bits and nothing else. The main selling point is the swivel head feature, but considering everything we have seen, it still feels like it should cost a little less or come with more.

      Conclusion
      The Titan swivel-head ratchet is undeniably interesting. It has features no other ratchet so far has. The swivel head will undeniably reach fasteners no fixed-head ratchet will. The Titan also has the highest teeth count so far, with 90 teeth. This is unbeatable. The minimum swing arc is only at four degrees.

      Unfortunately, the Titan comes last or second last in many other lists. It is the heaviest yet, at 78 grams. It has the widest head yet, at 23mm. It adds the most to the inserted bit length, at 13mm. It has the worst switch. It has the worst price-to-accessories ratio, at $17 with only two mediocre bits.

      The selling point was the swivel head feature, and the high teeth count. Sadly, these mean little when using the ratchet is cumbersome. The Phillips #2 bit that came with the ratchet is the worst fitting bit I have used. Even with PB Swiss bits though, the Titan was not easy to use. The swivel head seemed to create more problems than it solved. I get much better performance out of much cheaper ratchets. Even the Mulwark, with its humble 16 teeth was easier to use. It is low-profile, it takes double-ended bits, I know which position the ratchet is in, and which way the switch has to go to select the other direction, and it came with 19 bits for a dollar less than the Titan. For the same price as the Titan, you can get the GreaTalent ratchet, which comes with a case and 36 S2 bits.

      Considering everything so far, I do not think I would recommend this. The swivel head feature is neat, and will work where no other right-angle ratchet will, but if the fastener is a little too tight, and users are pushing the bit in the screw, the head will simply start to swivel. A locking swivel head would have been even more interesting and much easier to use. Users will have to get used to the quirks of the swivel head to get the most out of it.

      Pros
      -Swivel head allows right-angle driving, in-line driving, and everything in between.
      -90 teeth provide a minimum swing arc of 4°.
      -Good build quality.

      Cons
      -Comes with only two mediocre bits.
      -Swivel-head is not locking; folds when pushing into fastener.
      -Head adds 13mm to bit clearance.
      -Switch has no direction or position indicators.
      -Heavy.

      If you liked this ratchet, I won't tell anyone. Also check out:

      EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

      Merit Badges
      Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
      1 Reply Last reply
      • ReamerPunch Offline
        ReamerPunch
        Global Moderators
        Posts: 12,187
        ReamerPunch Offline
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #76 Quote Reply

          Well, you won't be seeing this ratchet in here any time soon. :o

          EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

          Merit Badges
          Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
          1 Reply Last reply
          • Adam5 Offline
            Adam5
            Posts: 8,411
            Adam5 Offline
            Adam5
            wrote on last edited by
            #77 Quote Reply

              :o

              I wonder how expensive is it for someone to ship items from the US to Australia?

              MT Scissors Comparison & Spreadsheet

              Merit Badges
              Gas Station MRE challenge The SUPER Challenge Hacker Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge Fishing Fire Making PST 30 Day Challenge LM Rebar Challenge Tool Box Challenge The 30 Day MiniTool Challenge 30 Day Combo Edge Challenge LM Crunch 30 day Challenge Off Brand MT Challenge Level 2 Traditional Folder Challenge LM Wave Challenge MTO Rotation Challenge One Piece Collector  30 Day Vintage SAK Challenge LM Surge Challenge Level 3 Case XX 30 Day Challenge Bond 30 Day Challenge
              1 Reply Last reply
              • ReamerPunch Offline
                ReamerPunch
                Global Moderators
                Posts: 12,187
                ReamerPunch Offline
                ReamerPunch
                Global Moderators
                wrote on last edited by ReamerPunch
                #78 Quote Reply

                  Jackly key-chain ratchet

                  Weight: 42g
                  Bit holder with 6 bits: 40g
                  Length: 60mm
                  Head width: 19mm
                  Head clearance with standard bit: 30mm (adds 5mm)
                  Teeth count: 36
                  Minimum swing arc: 10°
                  Bit retention: magnet
                  In-line driver: no
                  Bit material: Chromium-Vanadium steel
                  Handle material: Chromium-Vanadium steel
                  Price: $9 with 6 bits and a bit holder
                  Bits: Phillips 0/1/2/3, Slotted 4, 1/4" square socket adapter

                  Accessories
                  The Jackly comes with four Phillips bits, a slotted bit, a square socket adapter, a bit holder with six bit slots, a 10mm split-ring, and a 30mm split-ring. The bits are interesting. They all have a colored, knurled collar. This does assist extraction from the holder and ratchet, and they can also be used as finger spinners.

                  Dimensions
                  At 60mm, this is the shortest ratchet yet, with the Ares ratchet being the second shortest, at 85mm. The Jackly is still quite wide and thick. At 42g, this is lightweight, but the Topeak and PK Tools ratchets are a mere 29g.

                  Teeth Count
                  The Jackly ratchet shares its design and construction with the GreaTalent ratchet. The Jackly has 36 teeth, for a minimum swing arc of ten degrees. This is not the best, but the short body and low profile head allow for some maneuverability, so not all is lost.

                  Bit Retention
                  The bits are held in place by a magnet. It is not overly strong, so it will do its job without making bits hard to remove.

                  Bit compatibility
                  Stubby bits can be removed easily. The ratchet is not compatible with double ended bits.

                  Switch action
                  The Jackly ratchet has an oversized and exposed pawl, which is its own switch. It is spring-loaded, and the retention is excellent. When in one position, it will not switch positions by bumping into something. Its sides are also knurled to offer traction when operating it.

                  Ease of use
                  The Jackly has 36 teeth, which provide a 10 degree minimum swing arc. This is far from impressive, but expected of an inexpensive ratchet of this price. As long as it has enough room to engage a few teeth, this will do. The wheel and pawl engage each other convincingly, with no tolerance issues.
                  The Jackly has an exposed gear wheel and can be used as a finger wheel for more speed on a somewhat loose fastener. The pawl has a good detent and does not change positions accidentally. The ratchet is rather short, which is understandable, as it is intended for key-chain carry. It has a stocky body with a flared end, which helps fill the hand and be comfortable. It does not provide exceptional comfort or torque, but it is not meant to. As it is, it is perfectly usable for a quick fix.

                  Construction Quality
                  Much like the GreaTalent ratchet, the Jackly consists of two metal plates riveted together to hold the internals. It is rather thick and wide compared to other compact ratchets. The lanyard hole end is plastic. This may cause some concern, but the plastic piece is wide and it only houses the pawl's spring. It is not the best arrangement, but it does appear strong enough to hold the spring and a lanyard.
                  The wheel and pawl have precisely ground teeth and engage perfectly. The pawl has excellent detent in both positions. The lanyard hole is chamfered and will not damage cords. The body plates have some grind marks and a few burrs.

                  Portability
                  This is the main selling point of this ratchet. It is short, lightweight, has a lanyard hole, and it comes with a key-chain set-up bit holder. Admittedly, we have seen other ratchets that weigh even less. Some even have a pass-through head that allows key-chain carry. Still, the Jackly is the shortest ratchet yet, and will be at home on a key-chain. If you only want a few bits, those can be on your keys as well.
                  Of course, the ratchet is so short, that it will take little space in an edc pouch.

                  Value
                  Costing only $9, there is some undeniable value to this ratchet set. It is short, it has a knurled finger wheel, a good magnet, and a nice lanyard hole. It also comes with a bit holder and six bits.

                  Conclusion
                  The main attraction of this is the key-chain compatibility. It is not the strongest mini ratchet, or the most fancy. It is not the best when it comes to fit and finish. It does not offer many features. Most if not all ratchet we've seen so far offer more.

                  Still, this ratchet does what it says on the box. It does not win the portability category altogether. There are slimmer, lighter ratchets out there. But it is the shortest and most inexpensive. It works as intended, and it is plenty strong for its intended use.

                  At $9, with a key-chain bit holder and six bits, it is hard not to recommend this. It will make a nice addition to a key-chain, it works as intended, and at its price point, it will make an excellent little gift or stocking stuffer.

                  Pros
                  -Gear wheel is exposed, able to be turned with fingers.
                  -True key-chain set-up, with short length, large ring hole and double key-ring bit holder.
                  -Inexpensive.

                  Cons
                  -Somewhat heavy for its length.
                  -No warranty or other information of listed brand.
                  -Structural integrity relies on plastic.

                  If you liked this ratchet, also check out:

                  EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                  Merit Badges
                  Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                  1 Reply Last reply
                  • ReamerPunch Offline
                    ReamerPunch
                    Global Moderators
                    Posts: 12,187
                    ReamerPunch Offline
                    ReamerPunch
                    Global Moderators
                    wrote on last edited by
                    #79 Quote Reply

                      I received the Wiha mini ratchet. :drool:
                      So the pending reviews are of the Wiha, Rujoi flex-head, Klein, and Ovatt.

                      20220512_153943.jpg

                      EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                      Merit Badges
                      Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                      1 Reply Last reply
                      • Adam5 Offline
                        Adam5
                        Posts: 8,411
                        Adam5 Offline
                        Adam5
                        wrote on last edited by
                        #80 Quote Reply

                          @ReamerPunch said:
                          I received the Wiha mini ratchet. :drool:
                          So the pending reviews are of the Wiha, Rujoi flex-head, Klein, and Ovatt.

                          I have both the Wiha and the Klein. Can't wait to hear your opinions on them :popcorn:

                          MT Scissors Comparison & Spreadsheet

                          Merit Badges
                          Gas Station MRE challenge The SUPER Challenge Hacker Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge Fishing Fire Making PST 30 Day Challenge LM Rebar Challenge Tool Box Challenge The 30 Day MiniTool Challenge 30 Day Combo Edge Challenge LM Crunch 30 day Challenge Off Brand MT Challenge Level 2 Traditional Folder Challenge LM Wave Challenge MTO Rotation Challenge One Piece Collector  30 Day Vintage SAK Challenge LM Surge Challenge Level 3 Case XX 30 Day Challenge Bond 30 Day Challenge
                          1 Reply Last reply
                          • ReamerPunch Offline
                            ReamerPunch
                            Global Moderators
                            Posts: 12,187
                            ReamerPunch Offline
                            ReamerPunch
                            Global Moderators
                            wrote on last edited by
                            #81 Quote Reply

                              @ReamerPunch said:
                              I have decided not to get the Wiha one.

                              :rofl:
                              I am glad I decided to get the Wiha. The case is tiny for what it has. I got the TerminatorBlue go-box for $40, and two days later I saw it for $36. :o
                              Just excellent. Great ratchet, nice locking extension, amazing bit selection, and the tiny case is just sweet.
                              I am writing the review now. I do recommend this, of course. It is an excellent investment, and miles better than the cheap sets you will find on Amazon.

                              EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                              Merit Badges
                              Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                              1 Reply Last reply
                              • Poncho65 Offline
                                Poncho65
                                Global Moderators
                                Posts: 87,638
                                Poncho65 Offline
                                Poncho65
                                Global Moderators
                                wrote on last edited by
                                #82 Quote Reply

                                  Some great choices here and lots of great info, RP :salute: :like:

                                  Merit Badges
                                  BO Tools Level 2 Japanese PST Reviewer Photographer Axe User Fire Making Hacker Multitool Encyclopedia User OCD Squad Time Lord Level 1 Mod User Duct Tape Discontinued SAK/MT Challenge The SUPER Challenge EDC Pocket Dump Challenge Def's 50k Challenge LM Rebar Challenge Traditional Folder Challenge Gerber MP Challenge Modified SAK Challenge MTo Anniversary Challenge Victorinox SwissTool Challenge LM Surge Challenge Level 2 Victorinox Spirit Challenge MTO Rotation Challenge LM Wave Challenge Calendar   2017 Calendar  2018 Calendar 2019 LM Surge Challenge Level 3 Keychain Challenge LM Crunch 15 day Challenge LM OHT Challenge PST 30 Day Challenge Calendar 2020 14th Anniversary Anything Goes Challenge Skeletool 30 Day Challenge The Batman 30 Day Challenge Poker Face Challenge Daredevil challenge The 30 Day MiniTool Challenge 30 Day Locks Up Challenge One Piece Collector 30 Day Rhymes with Orange Challenge Bond 30 Day Challenge Wally Badge 30 Day Ratchet Challenge
                                  1 Reply Last reply
                                  • smiller43147 Offline
                                    smiller43147
                                    Posts: 1,526
                                    smiller43147 Offline
                                    smiller43147
                                    wrote on last edited by
                                    #83 Quote Reply

                                      A great set of reviews. Hope you don't need that surgery.

                                      • Steve
                                      Merit Badges
                                      ALOX with Scissors MTO Tool MTo Store User Flashlight Birth Year SAK ALOX Colors Level 1 Keychain Challenge MTo Anniversary Challenge 30 Blades 30 Days 14th Anniversary Anything Goes Challenge
                                      1 Reply Last reply
                                      • ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        Posts: 12,187
                                        ReamerPunch Offline
                                        ReamerPunch
                                        Global Moderators
                                        wrote on last edited by
                                        #84 Quote Reply

                                          Thanks, guys! :cheers:
                                          It looks like I may not need the surgery, which is a huge relief. This is unrelated to my fractured toe, but when it rains, it pours, so what can you do.

                                          Question: Why are stubby bits not more of a thing? :think:
                                          I've come to appreciate the Mulwark ratchet more and more, because it comes with 19 bits, of which 13 are stubby bits. These are great. I know it's not that much of a job to just cut down standard bits, and I may end up doing it. Still, what's going on? Amazon has only one stubby bit set, and it's $112. I cannot find anything else. The next best thing is indeed the Mulwark ratchet.

                                          EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                          Merit Badges
                                          Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                          1 Reply Last reply
                                          • ReamerPunch Offline
                                            ReamerPunch
                                            Global Moderators
                                            Posts: 12,187
                                            ReamerPunch Offline
                                            ReamerPunch
                                            Global Moderators
                                            wrote on last edited by
                                            #85 Quote Reply

                                              Here's a breakdown of the ratchets I have so far. Pending reviews are the Wiha, Rujoi flex-head, Ovatt, Klein.

                                              Keep in mind that there are things that do not show up in here. The Titan costs $17, but comes with only two stubby bits. The GreaTalent also costs $17, but it comes with a case, and 36 S2 steel bits. For more information on accessories, ergonomics, fit and finish, etc, refer to the reviews. I am in the process of quantifying the subjective categories.

                                              Ratchets.jpg

                                              EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                              Merit Badges
                                              Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                              1 Reply Last reply
                                              • m47mu74nt Offline
                                                m47mu74nt
                                                Posts: 2,520
                                                m47mu74nt Offline
                                                m47mu74nt
                                                wrote on last edited by
                                                #86 Quote Reply

                                                  very interesting, as usual :)

                                                  Meet me also on youtube & instagram for mostly knives (and multitools) content

                                                  Merit Badges
                                                  Scale Changer Hacker Mod User SAKWiki User Duct Tape BO Tools Level 3 Flashlight Paracord Carabiner User Discontinued SAK/MT Challenge Minimal SAK Challenge Titanium Camo SAK Stayglow SAK Zip Tie User Scaler User Birth Year SAK Hook User ALOX with Scissors MTO Tool MTo Store User Jack'O Lantern Badge ALOX Colors Level 3 Victorinox Spirit Challenge Toothpick User Tool Box Challenge  30 Day Vintage SAK Challenge 30 Day Rhymes with Orange Challenge MTo Anniversary Challenge LM Signal Challenge Wenger Collector Level 3 30 Day Ratchet Challenge MacGyver 30 Day Challenge 20th Anniversary Anything Goes Challenge
                                                  1 Reply Last reply
                                                  • ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    Posts: 12,187
                                                    ReamerPunch Offline
                                                    ReamerPunch
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #87 Quote Reply

                                                      Just received three more! :like:
                                                      Wera Zyklop
                                                      Anex low profile ratchet
                                                      Jadeshay ratchet

                                                      So excited for these! :cheers:

                                                      20220524_151455.jpg

                                                      EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                      Merit Badges
                                                      Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                      1 Reply Last reply
                                                      • ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        Posts: 12,187
                                                        ReamerPunch Offline
                                                        ReamerPunch
                                                        Global Moderators
                                                        wrote on last edited by ReamerPunch
                                                        #88 Quote Reply

                                                          Ovatt Ratchet
                                                          (can also be found branded by Ashdel, Funfang, Hilitand, Omninmo, Utoolmart, Weytoll)

                                                          Weight: 74g
                                                          Kit weight: 218g
                                                          Length: 105mm
                                                          Head width: 24mm
                                                          Head clearance with standard bit: 32mm (adds 7mm)
                                                          Teeth count: 60
                                                          Minimum swing arc: 6°
                                                          Bit retention: magnet
                                                          Extension bit retention: magnet
                                                          In-line driver: no
                                                          Bit material: Chromium-Vanadium steel
                                                          Handle material: Chromium-Vanadium steel
                                                          Price: $20 with 10 bits
                                                          Bits: Phillips 0 and 2, Slotted 3 and 6, Spanner 4 and 6, Triangle 2.3, Allen 5 and 6, Tri-wing 2

                                                          Accessories
                                                          The Ovatt comes with ten bits, an extension, a plastic carrying case, and a zippered nylon pouch that has a clear plastic presentation side. The case sits in the pouch, with its belt clip exposed. The case can be removed from the pouch and used separately. The bits are stored in a fold-out holder, that is released with a latch. The bits are held in by friction, which is not much, but when this is closed, the bits cannot escape. The extension snaps into place, but the two tines that retain it are already white with stress, and do not inspire confidence. The part that houses the extension has a hole, so users can poke the holder from the underside to release it.
                                                          The bits include two spanner bits, a triangle bit, and a tri-wing bit. A little unusual to find such specialty bits in a ratchet kit that is targeted to the bike community.

                                                          Dimensions
                                                          The Ovatt is a little on the long side of edc ratchets, though certainly not by much. It is rather heavy, at 74g, currently at third place behind the Titan swivel-head at 78g and the Klein at 76g. The Ovatt has the widest head so far, at 24mm. It also adds 7mm to an inserted bit's clearance. All this may result in the Ovatt being just short of accessing a fastener in a tight spot.

                                                          Teeth Count
                                                          The Ovatt has 60 teeth, which is on the higher side. This gives it a minimum swing arc of six degrees for the head to engage the next tooth and turn a fastener. This would have been fine, but there are many other compact ratchets with much slimmer heads, with the same or even more teeth.

                                                          Bit Retention
                                                          The Ovatt and its extension use magnets to hold bits in place. These are adequate for their purpose. They are not overly weak or strong.

                                                          Bit compatibility
                                                          The ratchet socket is too shallow for double-ended bits to engage.
                                                          The extension it comes with is too deep for stubby bits. Double-ended bits will turn, but they barely engage, and have a lot of play.

                                                          Switch action
                                                          The switch is short but relatively thick. It sits and swings in its own little scallop. It has a good detent and does not seem to change positions when bumped accidentally, which itself is not easy to do.

                                                          Ease of use
                                                          The Ovatt is long, thick, with a coke-bottle shape body. It is nicely rounded and comfortable to hold. It provides a decent amount of torque. It even has a lanyard hole so it can be tethered if needed. It has 60 teeth, which may come in handy if a fastener is in a tight spot. Still, the Ovatt has the widest head yet, so this may cause issues. The head also adds 7mm to a bit's clearance, so stubby bits may be needed to compensate.

                                                          The knurled finger wheel is thin and much shorter in diameter than the ratchet head. As such, it is extremely difficult to spin it with your fingertips.

                                                          To access the bits, the latch mechanism must be pressed down. When doing this, the bit holder shoots open, and because the bits are held in with little friction, they can simply be catapulted across the room. Care must be taken to prevent the bit holder compartment from opening as violently as it does.

                                                          Construction Quality
                                                          Average. The Ovatt is an inexpensive tool and it shows. The ratchet body has dings, scratches, and imperfections all over. The ratchet mechanism has a lot of wobble in the head. The lanyard hole has a burred edge that will make quick work of cords.

                                                          The bits are simply painted, and the paint did not survive one single screw.

                                                          The extension, much like the ratchet, is covered in dings and scratches.

                                                          The nylon sheath is single-stitched and the lining is stitched unevenly and crooked at places. There are already loose threads.

                                                          The plastic case is thin and there are stress marks already. The bit holder spring is too strong but the bit retention is very weak. There are burrs and imperfections as well.

                                                          Portability
                                                          A mixed bag. The case has a belt clip, and the nylon pouch will catch any components that manage to fall out of their spot when on the move. This happens often. Having two mediocre containers working together is an inefficient and inelegant solution. It seems like the nylon pouch was an afterthought, to counter the mediocre plastic case. Any loose components will still remain in the pouch, but that means little. Users will have to open the pouch carefully and be mindful of any items ready to drop.

                                                          Of course, it does not help that the bit holder shoots out, launching bits away.

                                                          The ratchet is a good thickness for multi-tool pouch side-sleeves. It will fit in edc pouches. Tethering will require clips, as the lanyard hole will wear through cords.

                                                          Value
                                                          A prime example of "you get what you pay for", the Ovatt ratchet is inexpensive and it shows. This was bought for $20, and for that much, it is disappointing. The price has dipped at as low as $14, which is far more appropriate.

                                                          Conclusion
                                                          Mixed bags are not worth it in most cases, but at least there are some positives. The Ovatt is not a mixed bag. The only positives are the 60 teeth, and that it comes with 10 bits and an extension. Poor fit and finish; a below average holder and nylon pouch; black paint for the bits, that did not survive a single screw; ratchet and extension covered in imperfections; a lanyard hole that will wear down any cord that can fit through it; a knurled finger wheel that cannot be turned with fingers; the widest ratchet head we have seen thus far.

                                                          Does it work? Yes, it does work. You can put bits in it, and use it to turn screws. Is that good? Well, it's not bad, but it was a given that a bit ratchet would be able to use bits. It is thick, long, and round, so it does not do a half-bad job. Still, there is more to a bit ratchet than ratcheting bits. Compared to other ratchets we have seen, the Ovatt offers less than most. Sure, some ratchets have fewer teeth, but even then, they cost less, weighed less, and came in a much better set. Are you actually in the market for a cheap, unbranded bit ratchet? Get the GreaTalent. It costs $17, and comes with 36 S2 steel bits, a nice flat plastic case, and it has a perfectly usable knurled wheel (actually one of the best so far). Not a good enough brand for you? Get the Bosch mini ratchet. It costs $20 too, and comes with 20 S2 steel impact-rated bits, four sockets, an extension, and a nice plastic case.

                                                          There are many better options out there, that cost less and offer more. I do not see any reason to recommend the Ovatt over anything else. If you have settled on the Ovatt, keep looking. Go back in this thread and find something else. Keep browsing Amazon. Something better will undoubtedly appear.
                                                          Much can be said about the Ovatt bit ratchet; very little will be favorable.

                                                          Pros
                                                          -High teeth count.
                                                          -Bits include spanner, triangle, and tri-point.

                                                          Cons
                                                          -Heavy.
                                                          -Knurled finger wheel is hard to operate.
                                                          -Average fit and finish.
                                                          -Head adds a lot of length to bit.
                                                          -Low quality sheath and holder.
                                                          -Head is very wide.
                                                          -Bit holder compartment spring is too strong; shoots bits away when used.
                                                          -Lanyard hole is unfinished and sharp.

                                                          If you liked this ratchet, you skipped the text and only looked at the pictures, didn't you? Also check out:

                                                          EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                          Merit Badges
                                                          Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                          1 Reply Last reply
                                                          • m47mu74nt Offline
                                                            m47mu74nt
                                                            Posts: 2,520
                                                            m47mu74nt Offline
                                                            m47mu74nt
                                                            wrote on last edited by
                                                            #89 Quote Reply

                                                              Damned, when I started reading the review, I thought "cool! that grey and orange case would match nicely with my Juice(s) S2 and Fiskars tools" ...
                                                              Then I followed along, got to the conclusion and ... "okay, not for me then" :dunno:
                                                              not all reviewed tools can be good :cheers:

                                                              @ReamerPunch said:
                                                              Just received three more! :like:
                                                              Wera Zyklop
                                                              Anex low profile ratchet
                                                              Jadeshay ratchet

                                                              So excited for these! :cheers:

                                                              So am I ! (mostly for the Wera, and maybe that blue boxed one, that wouldn't match with above mentioned tools :rant:)

                                                              Meet me also on youtube & instagram for mostly knives (and multitools) content

                                                              Merit Badges
                                                              Scale Changer Hacker Mod User SAKWiki User Duct Tape BO Tools Level 3 Flashlight Paracord Carabiner User Discontinued SAK/MT Challenge Minimal SAK Challenge Titanium Camo SAK Stayglow SAK Zip Tie User Scaler User Birth Year SAK Hook User ALOX with Scissors MTO Tool MTo Store User Jack'O Lantern Badge ALOX Colors Level 3 Victorinox Spirit Challenge Toothpick User Tool Box Challenge  30 Day Vintage SAK Challenge 30 Day Rhymes with Orange Challenge MTo Anniversary Challenge LM Signal Challenge Wenger Collector Level 3 30 Day Ratchet Challenge MacGyver 30 Day Challenge 20th Anniversary Anything Goes Challenge
                                                              1 Reply Last reply
                                                              • ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                Posts: 12,187
                                                                ReamerPunch Offline
                                                                ReamerPunch
                                                                Global Moderators
                                                                wrote on last edited by ReamerPunch
                                                                #90 Quote Reply

                                                                  Ratchets reviewed so far

                                                                  EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                                  Merit Badges
                                                                  Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                                  1 Reply Last reply
                                                                  • BadMechanic Offline
                                                                    BadMechanic
                                                                    Posts: 991
                                                                    BadMechanic Offline
                                                                    BadMechanic
                                                                    wrote on last edited by
                                                                    #91 Quote Reply

                                                                      Solid work. Looking for more. Keep going and Im sure to buy one...even though I don't need it.

                                                                      Sent from my SM-A326U using Tapatalk

                                                                      1 Reply Last reply
                                                                      • ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        Posts: 12,187
                                                                        ReamerPunch Offline
                                                                        ReamerPunch
                                                                        Global Moderators
                                                                        wrote on last edited by
                                                                        #92 Quote Reply

                                                                          @m47mu74nt said:
                                                                          Damned, when I started reading the review, I thought "cool! that grey and orange case would match nicely with my Juice(s) S2 and Fiskars tools" ...
                                                                          Then I followed along, got to the conclusion and ... "okay, not for me then" :dunno:
                                                                          not all reviewed tools can be good :cheers:

                                                                          So am I ! (mostly for the Wera, and maybe that blue boxed one, that wouldn't match with above mentioned tools :rant:)

                                                                          Not much orange on it anyway. :D
                                                                          For an orange case, the Beta, Dewalt, or Gearwrench ones would be fine. That Beta box looks so nice. I wish it was readily available. I'd have reviewed it already. :drool:



                                                                          The one with the blue case, wow. It has some nice things going for it. Very glad I found it able to be shipped to Australia.

                                                                          EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                                          Merit Badges
                                                                          Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                                          1 Reply Last reply
                                                                          • ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            Posts: 12,187
                                                                            ReamerPunch Offline
                                                                            ReamerPunch
                                                                            Global Moderators
                                                                            wrote on last edited by
                                                                            #93 Quote Reply

                                                                              The Wera Zyklop switch is a tiny Wera Zyklop. :D

                                                                              EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                                              Merit Badges
                                                                              Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                                              1 Reply Last reply
                                                                              • ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                Posts: 12,187
                                                                                ReamerPunch Offline
                                                                                ReamerPunch
                                                                                Global Moderators
                                                                                wrote on last edited by ReamerPunch
                                                                                #94 Quote Reply

                                                                                  Klein 65200 Ratchet

                                                                                  Weight: 76g
                                                                                  Length: 109mm
                                                                                  Head width: 20mm
                                                                                  Head clearance with standard bit: 35mm (adds 10mm)
                                                                                  Teeth count: 72
                                                                                  Minimum swing arc: 5°
                                                                                  Bit retention: spring and magnet
                                                                                  In-line driver: no
                                                                                  Bit material: Chromium-Vanadium steel
                                                                                  Handle material: Chromium-Vanadium steel
                                                                                  Price: $24 with 5 stubby bits
                                                                                  Bits: Phillips 1 and 2, Slotted 3/16" and 1/4", 1/4" square adapter
                                                                                  Features: 5/16" (8mm) nut driver, 7/8" (22mm) finger loop, knurled finger wheel

                                                                                  Accessories
                                                                                  The Klein comes with four stubby bits, a stubby square adapter for sockets, and a tiny bit holder with five slots. The bits are not easy to remove from the bit holder. They are extremely tight, and since they are stubby, they do not have enough material to be grabbed.

                                                                                  Dimensions
                                                                                  The Klein is definitely a little long as far as edc ratchets go, coming in at 109mm. It is also the second heaviest, at 76 grams, behind the Titan swivel-head at 78 grams. The back of the ratchet head has a 5/16" (8mm) nut driver. This makes the head a little thick. The finger loop at the other end also flares out significantly.

                                                                                  Teeth Count
                                                                                  The head has 72 teeth, which is quite high. The ratchet has a minimum swing arc of five degrees for the head to engage the next tooth.

                                                                                  Bit Retention
                                                                                  Unique to the Klein, the ratchet head has both a magnet and a spring to keep bits in place. Also, since the back of the head does not have a flush hole, bits can not be pushed from the back to aid removal.
                                                                                  Due to all this, bits are very difficult to remove. Stubby bits are impossible to remove with just fingers.

                                                                                  A way to solve this is a small screw inserted through the back. With a bit inserted, the screw will be pushed back a little, but still held in place by the magnet. To remove any bit easily, simply pushing the screw in will disengage the bit from the magnet and spring.
                                                                                  It is always frustrating to have bits stay in the fastener or drop out of the ratchet, but in this case, the retention is unnecessarily strong.

                                                                                  Bit compatibility
                                                                                  Double-ended bits do not engage and cannot be turned.
                                                                                  Leatherman bits do engage quite convincingly and can be used to great success. For best results, insert the bits so that the spring engages the bit's sides.

                                                                                  Switch action
                                                                                  The switch is very short and flat. It would be very difficult to have it accidentally bump against something and have the ratchet direction change. It has good retention, and it is very easy to operate.

                                                                                  Ease of use
                                                                                  The knurled finger wheel protrudes enough from the head and it is the easiest wheel to operate so far. The ratchet is long and provides excellent torque. The stem is flat compared to the cylindrical ones of most ratchets. This helps with grip and comfort. The finger loop allows for various grip configurations.
                                                                                  The extreme bit retention becomes tiresome rather quickly, but this can be eliminated with a small screw to act as a quick-release button.
                                                                                  The head is narrow and has a high teeth count.
                                                                                  Due to the 5/16" nut driver on the back of the head, the head is arguably taller than is needs to be. It adds 10mm to an inserted bit's clearance, which is the second worst, behind the Titan swivel-head ratchet, which adds 13mm. Stubby bits will aid the Klein in reaching fasteners in tight spots, but it only comes with four, and removing them from the ratchet head requires metallic assistance.

                                                                                  Construction Quality
                                                                                  The Klein mini ratchet is well-made. Its mirror finish is consistent. The ratchet mechanism has good fitment in the head, with very little wobble. All edges are nicely rounded off. The logos and numbers are crisply etched on the body.

                                                                                  Portability
                                                                                  Despite being a little long, and a little wide at one end, the Klein carries nicely, thanks to the finger loop. It can be stuffed in a pocket but retrieved easily. It can also accept the thickest of carabiners and cords to be hanged or even tethered to a belt or ring.

                                                                                  Because the head is so tall, it does not fit multi-tool pouch side-sleeves. It may fit in a pocket organizer if the webbing is wide enough for the ratchet's head to make it through.

                                                                                  Value
                                                                                  At $24, it is a little sad that the Klein comes with a small bit holder and only five stubby bits. It is definitely a high quality tool, with some nice features, and a few we have not seen before.

                                                                                  Conclusion
                                                                                  If nothing else, the Klein mini ratchet is interesting. It has both a magnet and a spring. It has a finger loop that is very useful. The head has a built-in 5/16" nut driver. It has a high teeth count and probably the best knurled finger wheel so far.

                                                                                  Having the bit retention be this strong is curious. This is the common spring that is found in high quality mini ratchets, like the Topeak, Prestacycle, Wera, etc. This spring is perfectly capable of keeping bits in place. The magnet makes it harder to use.

                                                                                  The listings for this refer to it as a "slim profile ratchet" and mention its "low profile head". It will certainly reach fasteners in some tight spots, but the body is most definitely the least slim so far. The stem starts flaring out near the loop, and the loop itself flares out to 30mm. Also, because of the nut driver on the back of the head, and because the magnet itself is about 3mm thick, the head on its own is 20mm thick, and with a standard bit inserted the clearance is 35mm. This is probably why it comes with stubby bits, but even then, it comes with only four bits and a socket adapter. There are many other mini ratchets that have a much lower bit clearance.


                                                                                  Klein, Wera, Anex, Topeak, Mulwark

                                                                                  It would have been better if the Klein did not cost $24, or if it came with more accessories. The 5/16" (8mm) nut driver may be useful to some, but it increases the head's thickness and bit clearance significantly. Omitting it would have slimmed down the head, improving the bit clearance. It would have allowed the magnet to be flush with the back of the head, and add a magnetic pick up function.

                                                                                  The Klein ratchet is undoubtedly a high quality tool with a lot to offer. Not everyone needs some of its features. This is only recommended as long as the pros outweigh the cons for you.


                                                                                  Klein, Wera, Anex, Topeak, Mulwark

                                                                                  Pros
                                                                                  -Good quality.
                                                                                  -High teeth count.
                                                                                  -Excellent ergonomics.
                                                                                  -Finger loop allows various grips and tethering options.

                                                                                  Cons
                                                                                  -Head adds 10mm to bit clearance.
                                                                                  -With no bit inserted, the head is 20mm thick.
                                                                                  -Comes with only 5 bits.
                                                                                  -One end is very wide due to finger loop.
                                                                                  -Bit removal is not easy.

                                                                                  If you liked this ratchet, also check out:

                                                                                  EDC Bit Ratchets | Multi-tools in TV series | Can Opener Comparison | Review Inventory

                                                                                  Merit Badges
                                                                                  Time Lord Level 3 Flashlight Paracord Duct Tape Fire Making Hook User LM Surge Challenge Level 1 Mod User SAKWiki User One Piece Collector ALOX Colors Level 1 LM Rebar Challenge OCD Squad Carabiner User Gun User Zip Tie User MTo Anniversary Challenge Photographer Outdoor Cook Mora User 111mm Collector Level 1 Stayglow SAK BO Tools Level 1 Reviewer 130mm Collector Level 1 Victorinox Spirit Challenge 111mm SAK Challenge EDC Pocket Dump Challenge SAKMC Hacker LM Wave Challenge Jack'O Lantern Badge Fishing LM Surge Challenge Level 3 Axe User Off Brand MT Challenge Level 3 14th Anniversary Anything Goes Challenge Pen Challenge The Nessmuk Challenge Minimal SAK Challenge 30 Day Weight-loss Challenge 30 day EDC Challenge Poker Face Challenge Farmer X Challenge 30 Day Bladeless Challenge Folding Hunter 30 days Challenge Gas Station MRE challenge The SUPER Challenge Traditional Folder Challenge Daredevil challenge SAK-alike Challenge Delemont 30 Day Challenge PST 30 Day Challenge Chuck Yeager Challenge Tool Box Challenge 30 Day Combo Edge Challenge Soldier On 90 Day Challenge SAK STACK Challenge 30 Days LM Squirt Challenge Level 3 30 Day Rhymes with Orange Challenge 30 DAY OPINEL CHALLENGE 30 Day Fire starting Challenge LM Micra Challenge 30 Day Flashlight Challenge Country of Origin 30 Day Challenge 30 Day TWEEN Challenge - 84 and 85mm SAKs Utility Knife  30 Day Challenge Buck 30 Day Challenge Wally Badge 30 Day Modular Tool Challenge Meme Creator Badge Carmen Sandiego Badge 30 Day Ratchet Challenge MacGyver 30 Day Challenge Greenie Meanie - 30 Day Green EDC Challenge I See Red - 30-Day Red EDC Challenge Black-out EDC 30-Day Challenge 30 Day Roxon Challenge 20th Anniversary Anything Goes Challenge
                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 3
                                                                                  • 4
                                                                                  • 5
                                                                                  • 6
                                                                                  • 7
                                                                                  • 18
                                                                                  • 19
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Reviews
                                                                                  4. EDC Bit Ratchets
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0