Quick Test: MTs vs. Bike Break Cable
-
@enki_ck said:
Thanks for those tests, Beat.
...
SPIRIT
Being mocked for its "inferior" wirecutters I think it did perform best (although the difference to the Re-Charge is marginal). Because I think the difference between Surge and Re-Charge might be due to manufacturing tolerance I tested two more Spirits (I don't have more Surges, Charges, Waves or MP-600). Both of those Spirits showed the same result as the first one, cutting the break-cable effortlessly.Not surprised one bit.
You misread the "inferior" wirecutters comments. The Spirit and Swisstool are excellent wire cutters for hard wire, fencing wire, ... anything heavy duty. Where they fail is at cutting soft, stranded wire.Yea, but the scissors work great on that sort of wire

Actually I was surprised at the great Spirit result and anything but good Surge result. Still in both tests the Rebar pliers worked good, so what gives?
-
I didn't test the Surge, so I can only assume it was operator error. ;)
-
@hiraethus said:
I didn't test the Surge, so I can only assume it was operator error. ;)
-
I didn't test the Surge, so I can only assume it was operator error. ;)

Ok, I have to step in here, you need to come up with a better insult, I mean seriously I have already done that:
How did the Surge go with the handle side stranded-wire cutters?

Didn't think of that (Surge noob)
So, you have until tomorrow to come up with a better quip!
-
I had to cut some bike cable today and figured since the MP400 did so well in your test I would give it a try. My MP400 would not even cut and just folded in between the cutters. Complete failure. The Rebar had to finish it off and got through it, but did not perform very well either.
-
@captain spaulding said:
I had to cut some bike cable today and figured since the MP400 did so well in your test I would give it a try. My MP400 would not even cut and just folded in between the cutters. Complete failure. The Rebar had to finish it off and got through it, but did not perform very well either.Interesting, you having problems with the Rebar, that one worked well for me. Was yours new or well used?
-
@captain spaulding said:
I had to cut some bike cable today and figured since the MP400 did so well in your test I would give it a try. My MP400 would not even cut and just folded in between the cutters. Complete failure. The Rebar had to finish it off and got through it, but did not perform very well either.
Interesting, you having problems with the Rebar, that one worked well for me. Was yours new or well used?
The Rebar has seen use, but not a whole lot of pliers use. Probably the first use of the wire cutters on it. Same with the MP400.
-
Those knipex pliers would be a great addition to my toolbox :)
-
nice testing! very informative.
-
@captain spaulding said:
@captain spaulding said:
I had to cut some bike cable today and figured since the MP400 did so well in your test I would give it a try. My MP400 would not even cut and just folded in between the cutters. Complete failure. The Rebar had to finish it off and got through it, but did not perform very well either.
Interesting, you having problems with the Rebar, that one worked well for me. Was yours new or well used?
The Rebar has seen use, but not a whole lot of pliers use. Probably the first use of the wire cutters on it. Same with the MP400.
Here is one of those silly ideas, could the Rebar and Surge issues be related to the removable wire cutters?
-
@captain spaulding said:
@captain spaulding said:
I had to cut some bike cable today and figured since the MP400 did so well in your test I would give it a try. My MP400 would not even cut and just folded in between the cutters. Complete failure. The Rebar had to finish it off and got through it, but did not perform very well either.
Interesting, you having problems with the Rebar, that one worked well for me. Was yours new or well used?
The Rebar has seen use, but not a whole lot of pliers use. Probably the first use of the wire cutters on it. Same with the MP400.
Here is one of those silly ideas, could the Rebar and Surge issues be related to the removable wire cutters?
Yes, no, maybe... except the Surge also had problems when using the handle side stranded-wire cutters. I hope its not the case but I suspect it might be manufacturing tolerance, that leads to this result.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login