Shootout- Leatherman Skeletool vs SOG Reactor
-
Not that I would buy one of these...

-
Waiting for the last post! :)

-
Sorry, I got distracted by some other stuff... more on that later.... >:D
I will get the last part posted shortly.

Def
-
Part 7- Overall Fit and Finish
This one is also immediately apparent as soon as you handle each one- The Leatherman Skeletool just feels nicer in the hand, and each of it’s functions is crisp and locks into place. There’s nothing wrong with the SOG per se, it just doesn’t seem to feel as solid.

When you fold the Skeletool blade out you feel a healthy bit of resistance- it’s smooth, but you know it’s not going to fall out accidentally, and then when the liner lock snaps into place it feels like a bank vault door closing. The relatively deep click you heard when it does fills you with confidence that this tool is going to be as strong as you need it and won’t give in easily.
By comparison, although the blade setup is much different, the Reactor’s blade flings open like a kid tossing his backpack on the couch when coming in the house after school, and the liner lock is more of a pop than a click. Not a bad thing in its own right, but it just doesn’t give you that confident feeling that you get from the Skeletool.

Going a bit further, at some points it seems like someone spent more time crafting the Skeletool, with it’s sweeping lines and many interlocking parts, while the Reactor feels like someone was just trying to put the most used functions together to get something made. There’s nothing wrong with that mentality, and in fact I prefer a feature rich and functional tool over one that sacrifices function for the sake of looks, but the Skeletool hasn’t really sacrificed much for the way it looks.
The screwdrivers are a great example of this- the way the screwdriver end folds neatly inside the split end of the carabiner (unless you are using the flat bit!) and the spare bit tucks neatly into an otherwise unused spot on the frame, while the bit on the Reactor just sort of fits into a spare end because it can’t stay in the bit driver when not in use. The attention to detail shows that the Skeletool designer Glenn Klecker really put some effort into it.
In my opinion, the Skeletool design does qualify as art, because Leatherman continues to use that concept with the MUT, Signal and other tools, and yet they just don’t have the same appeal as the Skeletool, kind of like if someone stuck a bag of Ruffles in the hands of the Mona Lisa.
What all this means is that Leatherman has gotten this last point, and once again a shootout has resulted in a tie. It’s a bit of a shock to me as well, as once again my personal bias has been well established, but in the end each one has its strengths and weaknesses, and, as with any multitool, has its compromises. In the end though I have to say that I just don’t think you can go wrong with either of these tools. Yes, the Skeletool is higher quality, but the Reactor has massive pliers, well able to tackle big jobs despite being in a smaller package.And, there’s a twist….
In an ultra secret memo that I may be “sanctioned” for spilling, SOG has recognized the quality issues that have been plaguing them lately and have informed me that they are making an increase in quality a huge priority. This is great news for any SOG enthusiast, and I am looking forward to seeing what the result is. Maybe I’ll revisit this in a year or so, with a new Skeletool and a new Reactor and find out for ourselves!
Congratulations to both tools, and both companies- you have both made a fine tool, and, in the end, isn’t that really what everyone here wants, regardless of where it came from?
FINAL SCORE- Leatherman 5, SOG 5
TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE TIE :ahhh :ahhh :ahhh
Def
-
Great review!

The downside is that it just made me want the Skele even more, haha. -
That was a great write up
Hope we get some more soon

-
Love it!

-
@Wspeed said:
That was a great write up
Hope we get some more soon

The difficulty is trying to find two tools that are close in the same functions. For example, if you tried comparing the Wave and the Spirit, well, you just can't do it because the Wave has one handed opening blades, putting it in a totally different category than the Spirit. If you need one handed opening blades then the Wave wins. If you want better construction and more functions then the Spirit wins. You really have to look to find two tools that are on the same level and have all the same features, otherwise there's no real comparison.
But, I'm happy having the options we have available to us. :D
Def
-
Terrific write up and comparison. Thank you for the work you put into it.

-
Well done as always!

-
I really enjoyed this thread!

-
@Aloha007 said:
Terrific write up and comparison. Thank you for the work you put into it.
It was absolutely my pleasure.
It's easy to say you like this more than that, but I really want to know why. Unless it is made by Taylor Cutlery, no tool is a complete waste. Even the worst tools (except Taylor Cutlery products) have redeeming qualities, and it is worth looking for them- not that I think either of these tools are anywhere near the worst. I very much like both of them, and they have both seen a significant amount of carry and use.
Def
-
Thanks Grant for this great review.
I don't have either of both, and still wouldn't know which one to get without making up my own mind about them
-
Nice Review,thanks for taking the time to do it.
I have a Skeletool that I can not seem to bond with and I was intrigued by the SOG but when I went to a store to see one I was underwhelmed by what seemed to me an obvious lack of quality or attention to detail and thats as far as I got.
I have several SOG' and have always found them among the crude mainstream MT but this ones stamped construction just did not inspire me to get one at all.
I appreciate your in depth analysis though and I might have to give another look?

-
I think if you are looking for a tie breaker the Skeletool wins on price because they were a Christmas special at Home Depot in 2016 for under $30.00, and even though they weren't available at that price for the 2017 holidays many of us did buy them when they were on sale, and there's no reason to believe they won't be a Christmas special again in the future.
-
Awesome wright-up Grant... thanks again...
I have a few skeletools and used to edc one before I bought a SOG micro tool clip.. Actually miss the Skeletool too...
Your write-up has also opened my eyes to the Reactor... prior to this, the side by side shoot out I’ve seen has always been one sided...
Sent from my iPhone using Tapatalk
-
yes, boss, well written and entertaining.

Thanks for such an insightful overview of the tools, I've always put the Skele above the Reactor but this comparison brought up some points I didn't think about, that make it an attractive alternative.

-
@Alan K. said:
I think if you are looking for a tie breaker the Skeletool wins on price because they were a Christmas special at Home Depot in 2016 for under $30.00, and even though they weren't available at that price for the 2017 holidays many of us did buy them when they were on sale, and there's no reason to believe they won't be a Christmas special again in the future.The Skeletool already won a point based on price.
With pricing I always go with MSRP because it is the only fair way to do it- after all, I got this Reactor free from SOG for review purposes, and I bought that Skeletool. By that logic, the Reactor should have won the price point because it cost me less, even though that isn't a deal that just anyone can go out and get any time. Also, as a registered SOG dealer but not a Leatherman dealer, I can but SOG products at wholesale (cheaper) than I can buy Leatherman products (retail), so again Leatherman would have lost their point here.
I will always hold to MSRP for these things because there are always deals to be had, but MSRP is a benchmark that all brands adhere to, and it's only fair to have them all compete on the same level.
Def
-
Great review!
I though the final part was probably the best.
As someone that has owned and carried both I have to say that the Skeletool is the winner for me personally. The quality of the build is evident the first time you use the tool hard. The Leatherman is just stiffer, tighter and more refined. I think a lot of SOG tools would benefit from making the sheet-metal they use in the handle from steel just a few thousands of an inch thicker. Yes that it not simple change but it would make a huge difference to how stiff the tool feel in the hand under heavy use.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




