Shootout- Leatherman Skeletool vs SOG Reactor
-
@Wspeed said:
That was a great write up
Hope we get some more soon

The difficulty is trying to find two tools that are close in the same functions. For example, if you tried comparing the Wave and the Spirit, well, you just can't do it because the Wave has one handed opening blades, putting it in a totally different category than the Spirit. If you need one handed opening blades then the Wave wins. If you want better construction and more functions then the Spirit wins. You really have to look to find two tools that are on the same level and have all the same features, otherwise there's no real comparison.
But, I'm happy having the options we have available to us. :D
Def
-
Terrific write up and comparison. Thank you for the work you put into it.

-
Well done as always!

-
I really enjoyed this thread!

-
@Aloha007 said:
Terrific write up and comparison. Thank you for the work you put into it.
It was absolutely my pleasure.
It's easy to say you like this more than that, but I really want to know why. Unless it is made by Taylor Cutlery, no tool is a complete waste. Even the worst tools (except Taylor Cutlery products) have redeeming qualities, and it is worth looking for them- not that I think either of these tools are anywhere near the worst. I very much like both of them, and they have both seen a significant amount of carry and use.
Def
-
Thanks Grant for this great review.
I don't have either of both, and still wouldn't know which one to get without making up my own mind about them
-
Nice Review,thanks for taking the time to do it.
I have a Skeletool that I can not seem to bond with and I was intrigued by the SOG but when I went to a store to see one I was underwhelmed by what seemed to me an obvious lack of quality or attention to detail and thats as far as I got.
I have several SOG' and have always found them among the crude mainstream MT but this ones stamped construction just did not inspire me to get one at all.
I appreciate your in depth analysis though and I might have to give another look?

-
I think if you are looking for a tie breaker the Skeletool wins on price because they were a Christmas special at Home Depot in 2016 for under $30.00, and even though they weren't available at that price for the 2017 holidays many of us did buy them when they were on sale, and there's no reason to believe they won't be a Christmas special again in the future.
-
Awesome wright-up Grant... thanks again...
I have a few skeletools and used to edc one before I bought a SOG micro tool clip.. Actually miss the Skeletool too...
Your write-up has also opened my eyes to the Reactor... prior to this, the side by side shoot out I’ve seen has always been one sided...
Sent from my iPhone using Tapatalk
-
yes, boss, well written and entertaining.

Thanks for such an insightful overview of the tools, I've always put the Skele above the Reactor but this comparison brought up some points I didn't think about, that make it an attractive alternative.

-
@Alan K. said:
I think if you are looking for a tie breaker the Skeletool wins on price because they were a Christmas special at Home Depot in 2016 for under $30.00, and even though they weren't available at that price for the 2017 holidays many of us did buy them when they were on sale, and there's no reason to believe they won't be a Christmas special again in the future.The Skeletool already won a point based on price.
With pricing I always go with MSRP because it is the only fair way to do it- after all, I got this Reactor free from SOG for review purposes, and I bought that Skeletool. By that logic, the Reactor should have won the price point because it cost me less, even though that isn't a deal that just anyone can go out and get any time. Also, as a registered SOG dealer but not a Leatherman dealer, I can but SOG products at wholesale (cheaper) than I can buy Leatherman products (retail), so again Leatherman would have lost their point here.
I will always hold to MSRP for these things because there are always deals to be had, but MSRP is a benchmark that all brands adhere to, and it's only fair to have them all compete on the same level.
Def
-
Great review!
I though the final part was probably the best.
As someone that has owned and carried both I have to say that the Skeletool is the winner for me personally. The quality of the build is evident the first time you use the tool hard. The Leatherman is just stiffer, tighter and more refined. I think a lot of SOG tools would benefit from making the sheet-metal they use in the handle from steel just a few thousands of an inch thicker. Yes that it not simple change but it would make a huge difference to how stiff the tool feel in the hand under heavy use. -
Special request for a tie breaker. How about which tool has Joie de vivre? ;)
-
@OldBoy2016 said:
Special request for a tie breaker. How about which tool has Joie de vivre? ;)The reactor because the assisted opening blade is fun to play with. :P
Def
-
Darn it! I was hoping you’d say Skeletool coz it’s sexy.
-
Great write up and glad both were given a fair chance
I have a Skeley and have looked at the Reactor several times but never have gotten one :D If the QC may be better in the near future I may very well get one then though 
-
Nice work, Grant.

I think that was a fair and balanced appraisal, and not just balanced in the end result. I wouldn't agree with every point, but then nobody would. We all value things slightly differently, based on our own needs and preferences. That said, I do not have any significant arguements with any of the findings herein.
From my own perspective, I have commented in the past about the ergonomics of the Skeletool, the fact that SOG's compound leverage is great for amplifying gripping force on smaller items, but actually reduces gripping force on larger items due to making the grip ergonomically inefficient, and SOG's reputation for inferior quality over the last few years.
However, I think my dislike of both these tools is more fundamental to the tool format. Kampfer has rightly said in the past, that the Skele is unlike other "pliers based" tools, and is more of a "knife with pliers" than "pliers with a knife". The Reactor has done a good job of capturing that same essence of form. However, it's not a knife form that I have any liking or need for. I appreciate that some people like the locking knife format, but is I can't do a job with a slippie, I need a fixed blade, not one that is pretending to be. I certainly have no interest whatsoever in any kind of assisted blade, or any other "tacticool" elemental.
I am simply the wrong person for these tools.
If I DID have a genuine requirement for a one hand opening locking blade, that happened to have pliers and screwdrivers, which would I go for? Well I would got for one which I felt gave me the best ergonomics, and the one that I trusted the most. For me, that would be the Buck X-Tract, or X-Tract Fin. I recognise that is a discontinued model, but I happen to have one, and would rather reach for that than either of the two reviewed here.
I find the "insight" into SOG's sudden interest in quality improvements, to be disappointingly overdue. For four (or is it five) years now, they have been cementing their position as a company who cares very little about quality. Interested in design concepts, maybe, and in profit margins, but not in refining the concepts, ensuring that concepts are properly realised in the manufacturing stages, making sure that the products are indeed of useable tool quality, or giving a crap about their reputation in the marketplace.
If SOG are listening, and I hope they are, they need to understand and be prepared to accept that even if every single tool they sold from today onwards, was of the quality that they should have been for the last few years, this is going to be a slow recovery of customer trust. They have pumped many disappointing tools out for several years, and that kind of reputation damage doesn't get swept under the carpet quickly. They now need to consistently put TOOLS on the market, instead of novelty "dad gifts". Not just one or two, but the whole line, and make sure each and every current product, and every subsequent new release, can be carried and USED in real life applications with full confidence. Even then, it may take five years of high quality tools, to start undoing the damage from five years of defects, misinformation, and sloppily built overpriced gadgets. There's no quick fix, fellers - but you've only yourselves to blame. Good luck in your recovery.
-
Good addition to the argument, Trad.
I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.
These comments are coming from a guy who prefers to carry a fixed blade knife (and frequently does so). No one will ever convince me that a folder is a good substitute for a fixie, but in modern societies they aren't as well accepted as they should be (according to me :D). So we are left with tiny knives that fold. And here a locking knife blade is a good idea for safety and security.
I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.
In the end, I don't carry my Skele as often as I have my Charge or, now, REBAR. But I like having it as an option. In this respect I think Leatherman and SOG should continue to evaluate, improve, and produce these tools. Options is good.

-
All good points as were the ones before yours but the issue that I have with both tools here is that they not only seem like 1/2 tool sets but lesser quality for it as well?
They seem to think that there is a need to cut corners for price and/or weight while making the tool a crippled version of the real deal too.Take Vic though where pretty much any SAK that you get from the smallest to the biggest is still pretty much the same quality and design just scaled for different needs but always a good value for the quality regardless!
I would jump all over a small Spirit X Mini that was pint sized and just a shrunken Spirit in body & Spirit but the idea of throwing good money for the Skeletool for instance leads me to consider the Rebar or even Sidekick/Wingman for the same price where each is a pretty serious Heavy Duty tool in their own right.
@Nix said:
Good addition to the argument, Trad.I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.
These comments are coming from a guy who prefers to carry a fixed blade knife (and frequently does so). No one will ever convince me that a folder is a good substitute for a fixie, but in modern societies they aren't as well accepted as they should be (according to me :D). So we are left with tiny knives that fold. And here a locking knife blade is a good idea for safety and security.
I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.
In the end, I don't carry my Skele as often as I have my Charge or, now, REBAR. But I like having it as an option. In this respect I think Leatherman and SOG should continue to evaluate, improve, and produce these tools. Options is good.

-
@Nix said:
I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.I find slipjoints to be safer. I have had far more nicks and cuts from locking blades than non-locking blades - particularly back locks, which I now refuse to use, but also from many liner locks too. I do appreciate that I am deep in minority territory on that one...
@Nix said:
I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.I much prefer to have a stand alone pocket knife than the knife on any pliers tool. I consider my pliers tool to be my pocket "everything else other than a knife", and would rather they made it knifeless, and put something else useful in it's place. I'm still in the minority on this one too, but a larger minority this time.
On this, I agree 100%

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





