Why lock blades?
-
As this discussion carries on I do think its a very interesting question, what would our grandfathers or your grandfathers think of these current (locking) knives? I think a great many already answered or at least some, the Buck 110
.Theres nothing wrong with liking a good ole slip joint. I've come to very much appreciate them. Unlike our SAKs they come in a wide range of handle covers which for me is a nice thing. The patterns are far and wide as well. There have been several discussions on locking folding knives. After all the reading and understanding each view point I've come to the middle ground of, we like what we like. Many come full circle, some harken back to their good ole days, some like me are discovering traditional folders for the first time, and as we might imagine a whole lot of other reasons.
Looking back at innovation for a second, Buck 110 was primarily for hunting. You could carry a good sized hunting blade half the size of a fixed. These were well received and and arguably one of the strongest locks for a folder. I looked to videos to see if anyone posted a failed lock by a Buck 110 and non seem to pop up. Ok in full disclosure there was one but I am not certain this would qualify IMO.
As innovation continued we saw the pocket clip and OHO knife developed. Lighter strong materials and super steels. IMO this is not a bad thing.
-
@Aloha said:
I wonder how many injuries have occurred simply from foolishness? Having been in the kitchens cooking and around knives I have seen some cuts happen. It usually rushing or a momentary loss of attention.I've only injured myself with a knife 1028 times*. I can attest to the fact that in each case I was either being careless, inattentive, or foolish.
*OK, not including being cut on barbed wire, broken glass, or pointy tree branches.
-
I believe that at least some our grandpappies would have been happy with a pocket clip and locking blade if it existed, or anything they could have afforded at that time weather or not it was locking. I don’t believe it was PURE choice for most to own a slip joint, but It’s just what was available then. I’d bet Everyone has had injuries of some sort with blades at some point, Even if it was in the 20’s. My grandpa is in his 90’s and bought a PST when they came out, Still carries the Wave gen.1 to this day (sheath carry). I’d bet he would have bought one if he could have years before. He gave me his worn out PST years ago,and is what gave me the love and fascination with MTs. :D Thanks gramps!
-
For what it's worth I believe my grandfather would have liked a lock back knife very much.I have two of his knives(both Imperial scout utility models)and both of them are difficult to open at best.The springs are very strong and they have a tendency to snap to the closed position shortly after reaching the halfway position. I know this first hand because one of them nearly amputated my finger when I was eight years old.I removed it from the drawer where it was kept(without authorization)and was attempting to open it when this occurred.The only reason I didn't get a whipping for my misdeed was he was too busy trying to stop the bleeding.
On another note(I believe I have mentioned this before)there is one model of lockback that is the absolute worst design I have ever seen and that is a Benchmark Rolox. Designed by a very famous knife designer(Walter,"Blackie" Collins)who has designed many knives this one was his one failure in my humble opinion.
For those not familiar with it,the knife is opened by pressing down on a serrated portion of the blade tang which raises the blade out of the well and allows it to slide forward and locks into the open position. To close it,a normal style lock tab(located on the bottom of the knife rather than the top)is depressed lifting the blade and then gripping the blade sliding it back until it drops back into the well.
Sounds like a great design right? WRONG! If you are using the knife and cutting heavy material such as cardboard your baby finger rests right on the lock release which will trigger and cause the blade to move rapidly toward the closed position.This usually results in the web of skin between your thumb and forefinger being trapped between the blade tang and the knife frame. Don't ask how I know this!
Here are some pictures of the knife and it's operation -
And this picture shows where your finger rests while using the knife.
-
I used to keep a little museum of tidbits that tried to maim or kill me. As it filled up it got depressing to look at though. I've certainly cut myself, set myself on fire, electrocuted myself hairless with 400v, dropped molten metal in my pants, had aluminium blocks flying around my head, washing my face with acid and sitting next to some radioactive stone for the better part of two hours.
There are more, but the point is they were all user fault at some level - but not only that. Many were also in part the result of bad design, badly setup workplace or products failing to live up to their promise. Like the post above where the lock can be accidentially unlocked, or some failed locking folders I have that have issues with either not engaging the lock properly in the first place or just failing very easily.
We all make mistakes, and some products makes us more prone to that than others. And some products just plain fails. But a working lock in itself is a good thing - I just don't want to rely on it.
-
Ray - that is one cool looking knife. Even if it is a bad design, it is a great part of knife history!

-
@Ray S said:
And this picture shows where your finger rests while using the knife.I have one of those Ray.It's a "First Edition" Lightweight Viper.
Mine will not unlock under those same conditions.Perhaps the wood scales have the cut-out too deep.
I have some other of Blackie Collins designs he did for Gerber.
-
No real preference here, and for many larger folders, I might as well go fixed blade.
But then again, there goes another quality. Locks that are more likely to get you hurt than they are to prevent a blade closing up on you. Part of the reason I only recently got interested in tactical folders was that I bought (and was mostly actually given) Frosts as a kid whose locks lasted about a week before failing.
Anyone know how safe a Neely lock is under real use? I've been looking at the Timberlite with that style of lock for quite some time. As I understand, the blade is pulled out to unlock.
-
@toolguy said:
I have one of those Ray.It's a "First Edition" Lightweight Viper.Mine will not unlock under those same conditions.Perhaps the wood scales have the cut-out too deep.
I have some other of Blackie Collins designs he did for Gerber.
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs. -
@Ray S said:
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs.It must be the smaller version.It measures 3 7/8" closed.It is the "First Run Edition" "One of 500".
I have a Benchmark catalog from about 1983-84.I'll try to find it soon.
-
@cody6268 said:
Anyone know how safe a Neely lock is under real use? I've been looking at the Timberlite with that style of lock for quite some time. As I understand, the blade is pulled out to unlock.I can only go by the smaller Timberlite knives but I would question the strength of a knife that does not use metal liners.The small ones I have are too small for any serious work.

-
There's a video I watched a while ago where the guy batons a CS Voyager (IIRC) into a tree horizontally then tries to break the handle by pulling down on it, and breaks the blade with some extreme bending.
A tri-ad lock folder is not a fixed blade, but if your tool requirement is a knife that you use to cut, it's a compact and very capable package.
As far as that video goes a fixed blade could have failed at exactly the same place.
-
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it. -
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out :rofl: . My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.Good old fashioned common sense. :like:
I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
-
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.I didn’t know they had to have locks on their knives

I can understand their reasons for sure. -
@comis said:
Good old fashioned common sense.
I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
I agree...My MUDD is solid - no problems there.
-
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.
@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices. -
@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices.I believe BladeHQ had a video series on Youtube testing lock strenght, found it quite interesting

Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login