Why lock blades?
-
@toolguy said:
I have one of those Ray.It's a "First Edition" Lightweight Viper.Mine will not unlock under those same conditions.Perhaps the wood scales have the cut-out too deep.
I have some other of Blackie Collins designs he did for Gerber.
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs. -
@Ray S said:
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs.It must be the smaller version.It measures 3 7/8" closed.It is the "First Run Edition" "One of 500".
I have a Benchmark catalog from about 1983-84.I'll try to find it soon.
-
@cody6268 said:
Anyone know how safe a Neely lock is under real use? I've been looking at the Timberlite with that style of lock for quite some time. As I understand, the blade is pulled out to unlock.I can only go by the smaller Timberlite knives but I would question the strength of a knife that does not use metal liners.The small ones I have are too small for any serious work.

-
There's a video I watched a while ago where the guy batons a CS Voyager (IIRC) into a tree horizontally then tries to break the handle by pulling down on it, and breaks the blade with some extreme bending.
A tri-ad lock folder is not a fixed blade, but if your tool requirement is a knife that you use to cut, it's a compact and very capable package.
As far as that video goes a fixed blade could have failed at exactly the same place.
-
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it. -
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.Good old fashioned common sense.

I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
-
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.I didn’t know they had to have locks on their knives

I can understand their reasons for sure. -
@comis said:
Good old fashioned common sense.
I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
I agree...My MUDD is solid - no problems there.
-
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.
@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices. -
@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices.I believe BladeHQ had a video series on Youtube testing lock strenght, found it quite interesting

Sent fra min FRD-L09 via Tapatalk
-
. I agree Aloha. I saw that video!
Knives are like anything else, I guess. It's all in how you use them most of the time.@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices. -
@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices.Back when I was into that same lock debate I was really into those videos that tested lock strength testing of various lock types. The best ones were from blade HQ and Demko testing various knives against the Triad lock for CS.
One video I’ve never seen is triad vs back lock which I always wondered. Not that it should matter in normal use but I have a sneaking suspicion that back locks are just as strong as Triad as regardless of the extra pin in the Triad it all comes to the frame integrity to withstand stress.
Which goes back to a high quality fixed blade being your best option for hard use.
-
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.Is that what it's come to?

-
Sadly so...
-
I really hate to get back into this debate......but....... I just finished watching that video of someone banging on a roll of tape with the spine of a bunch of different knives. My computer for some reason is not blessed with a sound feature(it's a Fred Flintstone Windows XP that has been updated)so I had to have the closed caption feature engaged and so could not listen to the,"rock lock" whatever that may be.
My only comment would be:what is the purpose of batonning the spine of a knife when pressure is never applied in that direction? Can anyone give me a coherent explanation? -
None whatsoever.
-
@Barry Rowland said:
In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt.If it makes you feel any better, this is a local council or district decision, not a national BSA decision. See
https://www.scouting.org/health-and-safety/gss/gss08/#gOur local council, while not differentiating between locking and non-locking folding knives, disallows fixed blades.
-
That is good news!
-
I've been singing this tune for years, praising slippies and criticising locking blades. I think I might have one or two locking blades kicking around somewhere, and the Vic Spirit is the only multitool left that has a locking blade. Everything else I own, is non-locking or bladeless, which suits my preferences and usage far better.
There are two reasons for this. Firstly, I had injured myself more times with locking knives than with non-locking. Especially backlocks. I absolutely hate those things, and outright refuse to own them now. I won't even use someone else's. Even having my current brainstem issues, which screws up vision, balance, and coordination, amongst other things, it is very rare that I'll injure myself with a slippy, irrespective of the task at hand - even inline piercing cuts (I do these frequently on vape juice bottles, go get the last bit out - about 1ml - that won't come down the nozzle). It requires certain usage techniques to do it safely, but I haven't once hurt myself "stabbing" into the bottle to start the cut. The second reason I have become averse to locking blades, is UK law...
... but NOT in the way you might think!
The often misunderstood UK laws, say that if you have a specific need for a locking blade, then go for it. However, fixed blades fall under the exact same category. So if I have just cause for a locker, I have just cause for a fixed blade, and why in the name of sanity should I settle for anything less than a fixed blade? In this perspective, a locking blade achieves nothing! It's just an inferior choice of tool in my opinion.
As such, I'm genuinely in favour of non-locking folders and fixed blades, and locking folders are completely inferior to both in my own personal opinion, and hold no functional value for me whatsoever. That said, if others feel they are a better choice for them, then so be it. I've no more right to try and "correct" them, than they have to try and "correct" me. We're all safer using the tools we are most familiar and dextrous with, so long as we can recognise, appreciate and use the tool within its safe limits.
So to sum up, locking blades are an abomination; a complete waste of money and materials, overcomplicating matters, and adding additional obstacles to safe one handed closing in many cases, and have spoilt many multitools with their presence, in my opinion. For many others, they're a complete lifesaver, and have enabled them to carry out tasks safer than they would otherwise have done, and if it wasn't for locking blades, they might not even have enough fingers left to be able to open a slippy.
They're no more wrong than I am.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login