Why lock blades?
-
And this picture shows where your finger rests while using the knife.
-
I used to keep a little museum of tidbits that tried to maim or kill me. As it filled up it got depressing to look at though. I've certainly cut myself, set myself on fire, electrocuted myself hairless with 400v, dropped molten metal in my pants, had aluminium blocks flying around my head, washing my face with acid and sitting next to some radioactive stone for the better part of two hours.
There are more, but the point is they were all user fault at some level - but not only that. Many were also in part the result of bad design, badly setup workplace or products failing to live up to their promise. Like the post above where the lock can be accidentially unlocked, or some failed locking folders I have that have issues with either not engaging the lock properly in the first place or just failing very easily.
We all make mistakes, and some products makes us more prone to that than others. And some products just plain fails. But a working lock in itself is a good thing - I just don't want to rely on it.
-
Ray - that is one cool looking knife. Even if it is a bad design, it is a great part of knife history!

-
@Ray S said:
And this picture shows where your finger rests while using the knife.I have one of those Ray.It's a "First Edition" Lightweight Viper.
Mine will not unlock under those same conditions.Perhaps the wood scales have the cut-out too deep.
I have some other of Blackie Collins designs he did for Gerber.
-
No real preference here, and for many larger folders, I might as well go fixed blade.
But then again, there goes another quality. Locks that are more likely to get you hurt than they are to prevent a blade closing up on you. Part of the reason I only recently got interested in tactical folders was that I bought (and was mostly actually given) Frosts as a kid whose locks lasted about a week before failing.
Anyone know how safe a Neely lock is under real use? I've been looking at the Timberlite with that style of lock for quite some time. As I understand, the blade is pulled out to unlock.
-
@toolguy said:
I have one of those Ray.It's a "First Edition" Lightweight Viper.Mine will not unlock under those same conditions.Perhaps the wood scales have the cut-out too deep.
I have some other of Blackie Collins designs he did for Gerber.
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs. -
@Ray S said:
Is the Viper the smaller version? I know they made them in a couple of sizes.I have another one with Micarta handles andfor some reason the false edge is ground on the opposite side of the blade.It does the same thing.
I have several Blackie Collins designed knives(Gerber and Benchmark)that are really great knives. I appreciate his genius in designs.It must be the smaller version.It measures 3 7/8" closed.It is the "First Run Edition" "One of 500".
I have a Benchmark catalog from about 1983-84.I'll try to find it soon.
-
@cody6268 said:
Anyone know how safe a Neely lock is under real use? I've been looking at the Timberlite with that style of lock for quite some time. As I understand, the blade is pulled out to unlock.I can only go by the smaller Timberlite knives but I would question the strength of a knife that does not use metal liners.The small ones I have are too small for any serious work.

-
There's a video I watched a while ago where the guy batons a CS Voyager (IIRC) into a tree horizontally then tries to break the handle by pulling down on it, and breaks the blade with some extreme bending.
A tri-ad lock folder is not a fixed blade, but if your tool requirement is a knife that you use to cut, it's a compact and very capable package.
As far as that video goes a fixed blade could have failed at exactly the same place.
-
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it. -
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.Good old fashioned common sense.

I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
-
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.I didn’t know they had to have locks on their knives

I can understand their reasons for sure. -
@comis said:
Good old fashioned common sense.
I think it boils down to attitude, some see the lock as a safety net to fall on, while others trust it like a bridge.
I never see ZT knives any different than other blades, but for those whom would believe otherwise, this video did raise some debates about whether it was misused or mis-advertised.
I agree...My MUDD is solid - no problems there.
-
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.
@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices. -
@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices.I believe BladeHQ had a video series on Youtube testing lock strenght, found it quite interesting

Sent fra min FRD-L09 via Tapatalk
-
. I agree Aloha. I saw that video!
Knives are like anything else, I guess. It's all in how you use them most of the time.@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices. -
@Aloha said:
Thanks for the video comis. I like the aesthetics of frame lock but prefer back locks.@Barry,
. I'm sure marketing has lot to do with purchases but we have to practice good knife safety in the end. I'm fairly sure there are some locks that just out perform others. I know I saw a video of lock types tested. This is not to say the wont fail or we can abandon safe use. I can see how some would view a knife with a locking mechanism as safer. I can only suggest we educate our friends and family to continue to use safe practices.Back when I was into that same lock debate I was really into those videos that tested lock strength testing of various lock types. The best ones were from blade HQ and Demko testing various knives against the Triad lock for CS.
One video I’ve never seen is triad vs back lock which I always wondered. Not that it should matter in normal use but I have a sneaking suspicion that back locks are just as strong as Triad as regardless of the extra pin in the Triad it all comes to the frame integrity to withstand stress.
Which goes back to a high quality fixed blade being your best option for hard use.
-
@Barry Rowland said:
My .02 cents. I've had brake failures, etc. I slipped while cutting brush with my Rebar saw, causing me a trip to the ER and a son almost passing out
. My hands are covered with scars, all of which we're caused by my inattentiveness. My Dad, a WW2 vet as well as a aircraft pilot/mechanic, said if it's mechanical don't put blind faith in it. In today's world, the traditional scout knife isn't even permitted to be used in a scouting event because it doesn't lock, and the organization doesn't want to be sued when a kid gets hurt. Bottom line for me is to use caution and good old fashioned common sense.
I love all knives, locking or not, but if a fixed blade will do the job better, I'll use it.Is that what it's come to?

-
Sadly so...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login