3D Printer Blog
-
Ok...I got fed up yesterday and decided to visit the local Walmart to find some glue sticks. I was able to procure some Elmers purple glue sticks. I tried it last night with an immediate failure. I rubbed the stuff on the glass plate and immediately cleaned it off with some alcohol because I had read someone on a forum somewhere stating they had great success doing this. I should have listened to my gut feeling. It failed. I took the glass plate off of the printer and washed if off really good. The textured side I used was a bit hard to clean very well. I decided to flip the glass over and print on the smooth surface. This time, I followed other directions to warm the bed up to temp and to put a layer of glue stick on...and to wait for it to dry. That appears to be working very well. I am in the process of printing off a figurine to test this out.
In the mail, I got my all metal upgrade extruder kit. Time to upgrade the little CR-100's plastic extruder.
Here is the plastic one. I am told that the filament wears a hole where the filament and plastic rubs together.
<a href="https://flic.kr/p/2j8spFw" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967482416_eaa741869e_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8534A by Chako, on Flickr
Here is the metal upgrade kit.
<a href="https://flic.kr/p/2j8spEu" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967482356_63cdf20aa6_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8536A by Chako, on Flickr
Installation was super easy, probably because it was my second kit install.
<a href="https://flic.kr/p/2j8tN7C" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967752992_fe229071b8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8537A by Chako, on Flickr
I have no idea what I am printing here as I am trying out the glue stick on the surface. I flipped the textured side over and rubbed glue on the smooth metal plate. Seeing as this is a non heated bed, I am curious to see if this will work. So far, it is the furthest I have gotten on a print with the CR-100. X fingers.
<a href="https://flic.kr/p/2j8spCf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967482226_b134b5dd05_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8540A by Chako, on Flickr
The little CR-100 does not appear to have to many upgraded pathways unlike the Ender 3. From what I can see, the metal extruder kit might be just it.
-
The glue stick worked wonders. In fact, I had a bit of difficulty getting the model to let go from the glass plate. Here is my failed kitty and successful Ice Age Proto-Squirell.
<a href="https://flic.kr/p/2j8rQsV" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967370673_a50907119f_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8543A by Chako, on Flickr
Now I remember what this will be...a monkey cup. Looks good so far. Only 37% complete.
<a href="https://flic.kr/p/2j8usJ6" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49967882881_db9564c1b1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8544A by Chako, on Flickr
If this works, this will be the first successful print from the Creality CR-100.

-
I love that Scrat!

-
Note to self, the CR-100 is as loud as the Ender 3 as far as stepper motor sound goes. The nozzle fan is quieter, but then, there is only the one and it is smaller in size...and added to the partial enclosure on two sides...
-
I kinda like it as well Don Pablo.
Well, I finally have success with the CR-100, and a glue stick was all that was needed.
<a href="https://flic.kr/p/2j8vyFm" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49968098018_05a3851bd7_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8545A by Chako, on Flickr
Seen through the window.
<a href="https://flic.kr/p/2j8zxTv" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49968875807_dbd3b3d605_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8547A by Chako, on Flickr
And the final product. I did have to scale the item down a lot, especially considering the CR-100 has a build volume of 100x100x80. I think I now have a dice cup. :D
<a href="https://flic.kr/p/2j8vyDC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49968097918_8fe717b572_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8550A by Chako, on Flickr
-
Looking good.
I regret not making better notes of my various settings and tricks for good results with various materials when I had them up and running well. It might be a good idea to do better than me at that.. :D
With some luck I'll get to make a little design or two later this summer where the end products are actually made on the filament 3D printer. That might get interesting.
-
I was a bit annoyed with the CR-100. I bought it as a lark because it was just darn cute. Annoyed that I couldn't get anything to stick. Now I have 2 viable 3D printers. Makes me happy.
Good point on taking notes.

-
@Chako said:
I bought it as a lark because it was just darn cute.Ah, I struggle with that issue too. I'll have to avoid tool shops when that small Knipex Cobra comes around. Or more likely, just accept my destiny and get it over with. Knowing Knipex I'd likely have to eat pasta for week as a financial plan. (Someone is screaming no more pasta in the background - I might need a new financial model! :D )
-
while I don't have a printer I had seen some articles that hinted that enclosures help with both noise and temp issues. As you seem to have realized.
-
I wanted to print a vase as something large and interesting to do. I found quite a few over at thingiverse, and decided to pull a nice model from there and print it. I import it into Cura 4.6.1 and found that after slicing it, it is solid. I went online to find out how to print this correctly. I located a setting called "spiralize outer countour". Apparently this will print any object with single wall thickness with a bottom and no top. Perfect. However, it took me several articles online to figure out how to activate it. You have to go into Cura settings and check a box among the hundreds of other boxes (found under specialized mode section). Once check-marked, the option comes up and enables you to print a vase. After activating this and slicing the model, it looks good to go. I am now printing it in black PLA, and am very curious to see if this print will work.
-
So far so good. Currently at 24% completed. I have found the glue stick works best when I flip over the glass plate to print on the smooth side.
<a href="https://flic.kr/p/2jaeSXG" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49987670718_3206460004_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8556A by Chako, on Flickr
-
Came out good. I was worried taking it off of the glass plate because the wall is very thin. I ran the glass plate under water and that did the trick. It popped off relatively easy.
<a href="https://flic.kr/p/2janEK7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49989190516_fe4a5d7059_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8559A by Chako, on Flickr
-
@Chako said:
Came out good. I was worried taking it off of the glass plate because the wall is very thin. I ran the glass plate under water and that did the trick. It popped off relatively easy.<a href="https://flic.kr/p/2janEK7" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49989190516_fe4a5d7059_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8559A by Chako, on Flickr
Single pass thickness? That does sound thin! :ahhh
-
Agreed. Surprisingly enough, I filled it with water and it did not leak.That to me is a miracle. It does make a nice decorative piece. I am printing a different model right now.
-
The latest print using the spiralize outer contour mode.
<a href="https://flic.kr/p/2jaHQy1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49993125752_08e0b546ad_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8571A by Chako, on Flickr
-
You certainly seem to keep your printers busy!
-
I really like that last one. Do you happen to have a link to it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

