3D Printer Blog
-
Success...and 3 of them only took 3 minutes to print.
-
Took another gander at the arrival dates. A few packages have now arrived in my city...possibly get them tomorrow maybe.

-
That was a surprise. I received my Ender 3 Pro just now.
<a href="https://flic.kr/p/2jmXBJJ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50120295666_bdc16b2600_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8689A by Chako, on Flickr
-
I am going to build it once I get the rest of the parts in. If all goes well, the motherboard should arrive today, and the rest on Monday. Fingers crossed.
-
Well...there might be something to building it first to see if it all works, and then upgrade things. I just got everything out of the box.
Laid out, looks exactly like the Ender 3X. There are a few things different, but I do not think the "Pro" designation means this is a professional 3D printer. It still is an entry level printer that gives fantastic results.
<a href="https://flic.kr/p/2jn8qft" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122208143_6dd8b33302_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8694A by Chako, on Flickr
The Ender 3X came with a glass plate as standard. I have read a lot about this magnetic build plate that comes with the Ender 3 Pro, and a lot of folks do not like it. I already bought a spare glass plate which I think will ultimately get put on there. I am curious to see how this magnetic plate works. I can tell that removing it is easy, but putting it back on the other glued on magnet is troublesome to alight it correctly. I also read that a lot of people just remove the top magnetic mat and place the glass plate right on the glued magnet. Not sure If I will like that...or if I will attempt to peel that magnet layer off of the aluminium heated bed. I have also read that if you go above 80 degrees, it kills your mats magnetism. This could be an issue for other printed materials. Thus far, I have only gone to 60 degrees with PLA.
<a href="https://flic.kr/p/2jnbjgg" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122773341_53edd9289b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8695A by Chako, on Flickr
Looks like the nozzle part is exactly like my Ender 3X. Not sure if the original Ender 3 has a different end or not.
<a href="https://flic.kr/p/2jncsxv" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122996307_a7dc43f690_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8696A by Chako, on Flickr
A lot of review sites seem to put a lot of points on the upgraded Meanwell power-supply of the Pro version. All I know is that the one that came on the Ender 3X is thicker, and I haven't had any issues with it at all. This Meanwell power-supply is thinner for sure. If you look at the second photo here, the old 3X power-supply is as thick as that bottom plastic shroud.
<a href="https://flic.kr/p/2jn8q1F" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122207343_cf7860a122_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8697A by Chako, on Flickr
<a href="https://flic.kr/p/2jn8pWx" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122207103_6de24c0c37_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8698A by Chako, on Flickr
The other big upgrade (or so I am told) is the Y-axis aluminum extruded beam which is now 4040 as opposed to the 3X's 2020 sized beam. The wider 4040 on the Pro should help the stability of the heated bed...although I have never encountered any issues with the 3X's 2020 Y-axis beam. I suppose bigger is better and will be a good upgrade. Also note in the picture the motherboard box has been reversed. This means I will have to put the printer on its side to access the compartment from underneath. This also puts the USB connector and Micro SD card higher off the ground. I didn't mind the lower access as I have the printer in line with the front of the table. At least no plastic bits can fall into the cooling fan in this configuration.
<a href="https://flic.kr/p/2jn8pS9" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122206848_33cf3a2478_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8700A by Chako, on Flickr
Oh my gosh. The Pro has the same plastic extruder assembly as the CR-100 and Ender 3X. I would have thought this part would be all metal for the Pro model. Guess I will have to order another metal one for 20 bucks.
<a href="https://flic.kr/p/2jncseV" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122995287_86982e28e4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8701A by Chako, on Flickr
So there you have it.
-
Good day indeed. Just got in both the motherboard and LCD screen along with the X-axis tensioner.
-
Time to slowly start this. I plan on finishing tomorrow hopefully. First thing...now that I have a few key upgrades at hand before building the printer, I might be able to do them in a logical sequence that might necessitate less work on my part.
First thing is first, to install the new stiffer orange bed leveling springs. It is so much easier to flip the bed over without having to worry about the gantry getting in the way. Still a spaghetti mess of wires on the one corner. You can see the upgraded spring in place...and the original one just south of it. These upgraded springs are stiffer and should hold your leveling better compared to the weaker originals.
<a href="https://flic.kr/p/2jnfY6x" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50123681057_f74a22f70b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8702A by Chako, on Flickr
Seeing that I now have the printer on its back...time to start changing the motherboards. I will get this cleaned up and will finish the transfer tomorrow. I ran into a small minor issue. There are 3 screws holding the plate on...however, the bottom plate would not come off. I flipped the printer over on the right side and found another screw that I had to remove...on the Ender 3, there was only the 3 screws. Here is the original motherboard all hooked up.
<a href="https://flic.kr/p/2jnfXZf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50123680692_739875c78d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8703A by Chako, on Flickr
Much like my Ender 3, they hot glued everything in place. Always a bit of a challenge and fun to remove the hot glue. Here I am starting to remove the cabling on the original motherboard. Yes, both the Ender 3X and the Ender 3 Pro feature the same noisy 8 bit motherboard version 1.1.4. Good thing I will be replacing it with a sweet BigTreeTech SKR Mini E3 V1.2 motherboard.
<a href="https://flic.kr/p/2jnePQf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50123458146_832484e93c_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8704A by Chako, on Flickr
Time to prep the replacement. I have to place the blue heat-sinks onto the stepper controllers.
<a href="https://flic.kr/p/2jnbVxv" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50122892023_78df905699_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8707A by Chako, on Flickr
That quick and easy job is done.
<a href="https://flic.kr/p/2jnePC1" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50123457436_d22bd3610b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8709A by Chako, on Flickr
That is it for tonight.
-
Today was a bit fun, and I am not exactly finished yet. I sill need to update the motherboard firmware, and not all went as planned.
First thing when I woke up was to remove the old board and install the new. Here are both the Creality V1.1.4 board on the left, and the BigTreeTech SKR Mini E3 V3.0 board on the right.
<a href="https://flic.kr/p/2jnp6Sj" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125268098_9d024facf8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8711A by Chako, on Flickr
I forgot an important step and installed the new board into its compartment.
<a href="https://flic.kr/p/2jnp6LT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125267783_809e26cedd_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8712A by Chako, on Flickr
Oops. I forgot to install the power leads first as they are mostly impossible to install when the board is screwed down in place.
<a href="https://flic.kr/p/2jntas6" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50126060597_0622f29854_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8713A by Chako, on Flickr
Once done, it is a simple manner of screwing down the motherboard and complete the wiring.
<a href="https://flic.kr/p/2jns38n" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125840851_6a867d0d85_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8714A by Chako, on Flickr
Here is the bottom compartment plate. Plenty of ventilation holes compared to the one found on the Ender 3.
<a href="https://flic.kr/p/2jns35m" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125840676_20d9aa43de_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8715A by Chako, on Flickr
Here I am installing the new LCD screen, which I found does not work as advertised. I am uncertain if it is a wiring issue on my part, or the part just shipped damaged. I have 2 white lines running perpendicular, and the whole display is so light I can barely read it. I might have to sent this part back, but I want to play around with it a little more...but not for today. I re-installed the original display and that works great.
<a href="https://flic.kr/p/2jnp6qc" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125266583_04c7d04163_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8716A by Chako, on Flickr
After installing the gantry and the extruder, bowden tube, and nozzle assembly, time to install the few key printed upgrades.
<a href="https://flic.kr/p/2jntaaT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50126059657_b5fe8d41fd_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8719A by Chako, on Flickr
Last to be installed is the Z-Axis bracket.
<a href="https://flic.kr/p/2jnta6j" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50126059392_e1e7bc52d1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8720A by Chako, on Flickr
The completed Ender 3 Pro on the left, and the Ender 3X on the right. I still have a few more things I want to upgrade. I did try the printer after leveling the bed and it works good. I installed the glass plate immediately as it ensures a flatter surface for leveling. Those puck lights I Velcroed to the underside of the gantry have caused problems. Gravity likes to make them fall as the glue fails. I will have to look at another solution that won't endanger a print in progress.
<a href="https://flic.kr/p/2jns2Mx" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50125839701_ceebba0cc6_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8722A by Chako, on Flickr
Next steps is to update the firmware, and play around with the BigTreeTech TFT35 E3 LCD. If I cannot figure this out, I may have to ask for another and return this one back.
-
Loving following this thread and seeing your progress and prints!
What are is the gantry made of? If you're having issues with the lights sticking then magnets may be better if it's a ferrous metal or zip ties if it isn't.
-

Aluminium. Zip ties might be the way. I have noticed however that these LED puck lights eat through 3 AAA cells like nothing. Because of this, I am thinking of something that uses a plug in. As I am typing this up, I remember that I have 2 lights upstairs when I did my leatherwork that are not in use. I may have the solution already.

-
Without the writeup and skipping a few of the pics the story might have looked as if the one printer printed the other one :D
Nice work!

-
Aluminium. Zip ties might be the way. I have noticed however that these LED puck lights eat through 3 AAA cells like nothing. Because of this, I am thinking of something that uses a plug in. As I am typing this up, I remember that I have 2 lights upstairs when I did my leatherwork that are not in use. I may have the solution already.

Hopefully that works for you!
If not then I'd suggest a USB powered LED strip zippled along the gantry, should be small enough it fits within the gantry's profile and energy efficient

-
They almost look like twins. :D
Lots of options. For example, I am thinking of buying an LED work light for the workbenche. I originally had 3 seperate lights Velcroed and of course they eventually fell. Now I have 6 annoying LED lights held by magnets. Replacing those with a single plugged in light might be the way to go.
-
Well I upgraded the firmware...and had to look up on how to do that again as I only did it the once before. I ended up on Creality's Github website and looked for the same exact firmware file as the other...that being the BLTouch firmware, even though I do not have one currently. I am still playing around with the BLTouch on the Ender 3X...and am not sure if I will spend the 100 bucks to get one for the Pro. Either way, I wanted both machines to be the same to eliminate any complications. I found the required file and renamed it "Firmware.bin". After that, it was a simple matter of copying the file to the micro SD card, and rebooting the printer with the card in the printer. 30 seconds later the firmware was successfully updated.
Here is the printer info on the Pro with the original LCD. Note that there is no mention of the screen being in simulation mode...and it is not a touch screen.
<a href="https://flic.kr/p/2jnJTgb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50129127932_6c0a7bfc86_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8725A by Chako, on Flickr
Here is the older Ender 3X printer info screen.
<a href="https://flic.kr/p/2jnEQCK" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50128338643_b596cc80ed_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8729A by Chako, on Flickr
Both are now running Marlin 2.0.5.3.
A quick look into the settings on the Pro showed a Z-Axis change of -1.85. This caused me issues with the 3X as it caused my nozzle to move upwards from where I had leveled it manually. This meant the molten plastic was dropping onto the surface and would not stick to the bed. I ended up re-leveling everything and moving that Z-Axis adjustment to 0. Seeing that I have already leveled this one...I will change this back to 0 as well. Anyhow, the BLTouch is not activated in the new Pro just in case I figure out my way around all of this bed leveling and get another for the newer printer.
Just went to the Marlin firmware page and noted they are now at version 2.0.5.4.
-
Well bad news about the LCD upgrade. I couldn't get it to work properly. The display is so faded that I can hardly see the information on it. Furthermore, there are two bold white thick lines that run parallel across the center of the screen. When I touch the touchscreen, I get a shimmer like you are pressing hard on a regular LCD. Me thinks it is broken. I will mail it back to Amazon tomorrow. :(
-
Here is the biggest issue with having the motherboard compartment oriented upside down in the Ender 3 Pro compared to the top down compartment of the Ender 3...having to put the printer on its side to do any work inside that compartment. Mind you, how many times will you have to play in there realistically...not much of a complaint in the end.
Here I am getting ready to unhook the serial cable in order to return the BigTreeTech LCD35 E3 V3.0 back to Amazon.
<a href="https://flic.kr/p/2jo8H1a" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50133580997_351b4abf48_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8730A by Chako, on Flickr
Yesterday, I pondered on a better lighting solution for my worktable. I was kidding myself with these little portable battery operated LED lights. They are strong but you can see the lighting dim as you go. The little puck lights worked great, but they ate 3 AAA batteries a day. I visited the local Tractor Supply Company (TSC) and found the perfect solution, a 36" 33W shop light that pumps out 3300 lumen. Operates via a pull chain. Now I have plenty of lasting light, and the best part, no more annoying Velcro or magnets. This one is held in place via 2 screws.

You can see the 3 puck lights removed from the Ender 3X on the lower left. I had 6 magnetic LED lights I bought at the Dollar Store seen on the right and back. problem is, although they stayed up there due to the magnets, each light had a dimmer switch to vary the amount of lighting. They moved when I twisted the knob...and they once again ate batteries.
<a href="https://flic.kr/p/2jo7xwB" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50133354011_d3b77e38e9_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8731A by Chako, on Flickr
<a href="https://flic.kr/p/2jo7xr6" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50133353691_700bc1911b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8732A by Chako, on Flickr
-
I am told by Canada Post that my 10 new 608ZZ bearings should be gracing my doors later today. Not sure if that will be the case...but it was time to print another upgrade, and probably one of the better improvements to the Ender 3, the upgraded spool holder for the Ender 3 Pro. This time around, I will be printing 2 sets of bearing holders...one will be 7.8 diameter (original), and a slightly smaller 7 diameter rod. The last time, I had to shrink the rods a bit for them to fit the bearings. I just hope I have enough red PLA left to make this 7 hour print. Time will tell l guess.
<a href="https://flic.kr/p/2joohNB" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50136426271_ab005d0ae8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8738A by Chako, on Flickr
<a href="https://flic.kr/p/2joohJ8" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50136426011_797b4d1d21_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8740A by Chako, on Flickr
-
The new workbench light is strong enough to light the whole room. I am very happy with this 40 dollar purchase...big time.
-
First print with the Ender 3 Pro is happening this morning. I am printing a WW2 Priest 1/100 scale model in black PLA. Nice to have 2 printers chugging away in silence. I still think upgrading the motherboard to this 32 bit silent SKR Mini E3 is the most bang for your buck upgrade. I am still not sure if I will buy another LCD upgrade seeing that the first did not work properly. Cool to see them both running though. Having 2 machines will give me a bit of flexibility.
<a href="https://flic.kr/p/2jomigG" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50136037618_6a7f013593_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8741A by Chako, on Flickr
<a href="https://flic.kr/p/2jomibX" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50136037343_6ae8c39331_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8742A by Chako, on Flickr
-
Anyone with more experience know what happened here? I have never encountered this kind of a fail. The only thing I can think of was some sort of slicing error. There bottom layer got laid down and then there was a shift to the right.

This was on the new Pro. This means I will have to try another print to see if the same issue arises.
<a href="https://flic.kr/p/2jou8JU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50137566452_c3bcc32d32_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8743A by Chako, on Flickr]
The Ender 3X print is going well.
<a href="https://flic.kr/p/2josVjQ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50137329576_fe0e18148c_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>IMG_8744A by Chako, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login