Can Opener Comparison
-
Oh, dear...... Gerber: "Legendary Blades". But it would seem for awl the wrong reasons........
-
Thanks for the review!
I had a Flik for many years.
Never had or ever tried to open a can with it.
It was a "Legendary" fail. [emoji23]Enviado de meu moto g(6) usando o Tapatalk
-
This video was a lot of fun to watch.
https://www.youtube.com/watch?v=gFAStgFqbE0 -
Fun indeed, thanks for sharing it

The swivel-around-the-middle ones seem cool!Makes me want to search eBay for vintage can openers now

-
P-38

The quintessential manual can opener, the P-38 is a claw. It is interesting that the hook and cutting edge are not in the same axis. They are perpendicular to each other, which positions both at the perfect position. The hook meets the lid at a right angle, grabbing onto it wonderfully, while the cutting edge tip contacts the lid right behind the rim, and the perfect angle to pierce into it.

Piercing was easy. The P-38 is designed perfectly to engage the can like it is supposed to.
Comfort is relevant I think. It does not make much sense to expect amazing ergonomics on something this tiny. It was not uncomfortable, and after only a few cuts, I was already used to the action, and was able to rock the can opener up and down, cutting with no issues. I never felt the slightest hint of it jamming or slipping of the rim. In fact, I let go, and the can opener sat frozen in position. It was not stuck or anything close to that, just sitting comfortably on the rim, thanks to the excellent angles of the hook and blade. Tracing along each previous cut was extremely easy and surprisingly fast, once I got used to the action.
It created a rather jagged edge, and I noticed a few metal specs on the table. These are not like the metal splinters that other can openers have produced, though I would prefer no shavings at all.
I will test this again and maybe go slower, and see if I continue to get metal specs.
Has anyone else noticed any metal specs with this?
2 points for punching through.
2 for comfort.
2 for not jamming.
1 for cutting.
2 for not slipping.Total: 9
-
P-51

The big brother of the P-38, longer, thicker, heavier. Using this was a very similar experience to the P-38.
Piercing was extremely easy. The shapes and angles are the same, and this also engages the can perfectly. No slipping, no jamming, and still sitting in place when you let go.
This was a little more comfortable. It is longer, and I got a better grip, and thanks to the blade being slightly longer, I got longer individual cuts. The difference in leverage is very noticeable and much more than anticipated. After only a couple of cuts, the action felt intuitive and I was able to cut the rid faster than any other can opener I have tested. Speed was not taken into account when using can openers for this thread, but the P-51 would be the winner. While extremely fast, the cut was consistent, easy, it never slipped or got jammed, or advanced off kilter. Most importantly, there were no metal shavings of any sort with this. It left behind a clean edge, less jagged than that of the P-38.It may be heavier and larger than the P-38, but the difference in performance was very noticeable. It is still small enough for all sorts of kits, and certainly a fantastic companion to any multi-tools that lack a can opener or have a mediocre or unusable one.
I can not wait to open a can with this again.
2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.Total: 10
-
I was looking forward for you testing them RP
I think this thread would be incomplete without thwm.Excellent results for such a "simplistic" design

-
@ReamerPunch said:
which positions both at the perfect position.I should become a columnist or something.

-
@McStitchy said:
I was looking forward for you testing them RP
I think this thread would be incomplete without thwm.Excellent results for such a "simplistic" design

I love the design. How can something this small be designed so well for its purpose, and perform so well? Does your multi-tool not have a can opener? Slip a P-51 in the sheath and you're set.

-
Yeah....ok... I'll get some :D
Will try to source them locally first. -
@McStitchy said:
I think this thread would be incomplete without them.
Nice work, RP! -
-
Another great video on pocket knife can openers.
https://www.youtube.com/watch?v=qZzebR4AGzY -
@ReamerPunch said:
"which positions both at the perfect position."I should become a columnist or something.

You do a great job. I avoid long commentary because I would make and miss many more verbal blunders.
-
Can Openers tested so far:
Bear & Son Bear Jaws
Bibury 21 in 1Buck
Bucktool (original attempt)
BuckTool (left-handed - anticlockwise)
BuckTool (right-handed - anticlockwise)
BuckTool (left-handed - anticlockwise - second attempt)
BuckTool (right-handed - clockwise - whole can)Coast Pocket PaperWeight
Coast Pocket PaperWeight (second attempt)
Craftright (Generic Suspension clone)
Ganzo G302-B
Grand Harvest K2
Grand Harvest K2 (left-handed)
Grand Harvest K6
Grand Harvest 26-SWGerber
Flik
MP400
MP400 (second attempt)
Multi-PlierLeatherman
Charge AL
Juice CS4
Juice CS4 (second attempt)
MiniTool
PST
Rebar
Sideclip
Signal
(/post/1731584)
Surge
Wave Plus
Wave Plus (different grip)
WingmanNexTool Flagship Pro
NexTool Mini Flagship
Ozark Trail Multiforce
P-38
P-51Roxon
Flash S803
Flex (claw)
Flex (quartercircle)
Phantom S802
Storm S801 (default)
Storm S801 (modded)
Storm S801SSchrade USA ToughTool
Schrade USA ToughTool (second attempt)
Sheffield 10 in 1
SOG Pocket Power Plier
SOG Powerlock
SOG PowerPintVictorinox
Bantam
Cadet
Deluxe Tinker
Deluxe Tinker (second attempt)
Farmer
Farmer (second attempt)
Fireman (liner-lock version)
Fireman (liner-lock version - second attempt)
Hercules (slide-lick version)
OHO Trekker (liner-lock version)
OHO Trekker (liner-lock version - second attempt)
RangerGrip 79
Safari Hunter
Spirit
Spirit (second attempt)
Sportsman
SwissChamp
SwissChamp (second attempt)Wenger
Highlander
Highlander (second attempt)
Ranger 06 - Mountaineer
Ranger 06 - Mountaineer (second attempt)
RangerGrip 60 -
I started this thread three years ago.

And only now did I realize I had not done a list of all the tools I tested. So, here it is. :D -
@McStitchy said:
Fun indeed, thanks for sharing it
The swivel-around-the-middle ones seem cool!Makes me want to search eBay for vintage can openers now

+1
It awlso keeps the lid and makes it easier to remove it without risking cutting yourself.

-
@ReamerPunch said:
I started this thread three years ago.
And only now did I realize I had not done a list of all the tools I tested. So, here it is. :D
-
Roxon Flex
This is a quarter circle, properly sharpened and at the perfect length to properly engage the can rim.
The tool is modular which means you can place the can opener in any position in the handle, but this does not really matter, thanks to the can opener length.Initial cut was very easy. The tool is extremely comfortable, thanks to all its rounded edges and tools flush with the frame.
The opener did not get stuck between cuts, nor did it slip off the rim. There was no shrapnel in the food at the end, which is nice.
Cutting was excellent and pretty consistent. I found myself mindful of aligning the can opener cutting edge right up to the rim, to get an easy cut,
And trace easily around the rim.
2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.Total: 10
-
Found the Leatherman Garage #5 requires a motion of inserting the tab to squishing to the side wall on the cut. Works better.
Bought some Victorinox Can Openers and am going to cut the tabs down to fit in the Large Bit Driver for a more proper and useful Can Opener. Am not too crazy about the idea of modifying the Garage #5 just yet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login