Can Opener Comparison
-
@McStitchy said:
I was looking forward for you testing them RP
I think this thread would be incomplete without thwm.Excellent results for such a "simplistic" design

I love the design. How can something this small be designed so well for its purpose, and perform so well? Does your multi-tool not have a can opener? Slip a P-51 in the sheath and you're set.

-
Yeah....ok... I'll get some

Will try to source them locally first. -
-
-
Another great video on pocket knife can openers.
https://www.youtube.com/watch?v=qZzebR4AGzY -
-
Can Openers tested so far:
Bear & Son Bear Jaws
Bibury 21 in 1Buck
Bucktool (original attempt)
BuckTool (left-handed - anticlockwise)
BuckTool (right-handed - anticlockwise)
BuckTool (left-handed - anticlockwise - second attempt)
BuckTool (right-handed - clockwise - whole can)Coast Pocket PaperWeight
Coast Pocket PaperWeight (second attempt)
Craftright (Generic Suspension clone)
Ganzo G302-B
Grand Harvest K2
Grand Harvest K2 (left-handed)
Grand Harvest K6
Grand Harvest 26-SWGerber
Flik
MP400
MP400 (second attempt)
Multi-PlierLeatherman
Charge AL
Juice CS4
Juice CS4 (second attempt)
MiniTool
PST
Rebar
Sideclip
Signal
(/post/1731584)
Surge
Wave Plus
Wave Plus (different grip)
WingmanNexTool Flagship Pro
NexTool Mini Flagship
Ozark Trail Multiforce
P-38
P-51Roxon
Flash S803
Flex (claw)
Flex (quartercircle)
Phantom S802
Storm S801 (default)
Storm S801 (modded)
Storm S801SSchrade USA ToughTool
Schrade USA ToughTool (second attempt)
Sheffield 10 in 1
SOG Pocket Power Plier
SOG Powerlock
SOG PowerPintVictorinox
Bantam
Cadet
Deluxe Tinker
Deluxe Tinker (second attempt)
Farmer
Farmer (second attempt)
Fireman (liner-lock version)
Fireman (liner-lock version - second attempt)
Hercules (slide-lick version)
OHO Trekker (liner-lock version)
OHO Trekker (liner-lock version - second attempt)
RangerGrip 79
Safari Hunter
Spirit
Spirit (second attempt)
Sportsman
SwissChamp
SwissChamp (second attempt)Wenger
Highlander
Highlander (second attempt)
Ranger 06 - Mountaineer
Ranger 06 - Mountaineer (second attempt)
RangerGrip 60 -
I started this thread three years ago.

And only now did I realize I had not done a list of all the tools I tested. So, here it is.
-
-
-
Roxon Flex
This is a quarter circle, properly sharpened and at the perfect length to properly engage the can rim.
The tool is modular which means you can place the can opener in any position in the handle, but this does not really matter, thanks to the can opener length.Initial cut was very easy. The tool is extremely comfortable, thanks to all its rounded edges and tools flush with the frame.
The opener did not get stuck between cuts, nor did it slip off the rim. There was no shrapnel in the food at the end, which is nice.
Cutting was excellent and pretty consistent. I found myself mindful of aligning the can opener cutting edge right up to the rim, to get an easy cut,
And trace easily around the rim.
2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.Total: 10
-
Found the Leatherman Garage #5 requires a motion of inserting the tab to squishing to the side wall on the cut. Works better.
Bought some Victorinox Can Openers and am going to cut the tabs down to fit in the Large Bit Driver for a more proper and useful Can Opener. Am not too crazy about the idea of modifying the Garage #5 just yet.
-
Oh yeah, Leatherman has a quarter-circle opener now. Hmm...
-
SOG PowerPint

Initial punch through was not bad.
The first three quarters of the can were going ok. I could trace along the rim adequately. The edge is short, and the bevel not that acute. With a Victorinox quarter circle, the edge is cutting along the rim in one continuous, obvious cut. The Pint was an interrupted, one break at a time sort of thing. It never felt smooth between cuts. Every cut felt like an isolated, single step, with the same resistance and force required as the original punching through.
At the exact 3/4 of the rim, the lid was being pushed into the can. The edge could not advance any longer, and just slid sideways along the lid (top right picture, where the opener is pointing). And I even tried going backwards from the end, to join the beginning of the cut to the end, and I could not even pierce the lid anymore.
For comparison, the Flex continued the cut, although with some difficulty.The Rebar started backwards from where the pint started and went through the mangled, bent lid with no issue.
The pint never jammed or slipped off the lid. Ergonomics are not that good with the Pint. I had to exert a lot of force for every single cut. The tool is a little too small to hold comfortably.
To sum up, the Pint may be enough to open a can. It can pierce, it can cut, and it did not leave any shrapnel in the food. If you are planning to open multiple cans maybe take a Rebar or PST or something.
1 points for punching through.
0 for comfort.
2 for not jamming.
0 for cutting.
2 for not slipping.Total: 5
-
Good info here. Nice to see Rebar and PST as consistent winners as I have both. The 91mm Vics sort of go without say.
-
Roxon Flex - claw
The first opener Roxon released for the Flex set of modular tools was the quarter circle, but recently they also released a claw.

This was a very similar experience to using the Flex with the quarter circle. Of course, the can opener can be placed in any slot of the Flex, as it is modular.
The Flex is very comfortable to hold, with all its rounded edges. No hotspots whatsoever.
Initial piercing was very easy. The claw did not get stuck or slip off the can at any point.
There was no shrapnel left in the can, which is very important. Comfort, speed, getting stuck, these are all important,but what good are they if the food is unsafe to eat once you open the can?
Cutting was easy, much like with a Leatherman claw. There was no need to be mindful of aligning every consecutive cut. Tracing around the lid was effortless.
It is very interesting that Roxon has two excellent can openers for the Flex set of implements. If you are used to one and prefer it over the other, you can just have that one installed, and if you want to mix things up or try the other style, you can install that one. And they're one-handed as well. Nice.

2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.Total: 10
-
GrandHarvest 26-SW

Oh, boy. This is bad. Surprisingly bad, for how good it looked like it would be.
0 points for punching through.
0 for comfort.
0 for not jamming.
0 for cutting.
0 for not slipping.Total: 0

This can opener is tapered and sharpened on the opposite sides of the average claw, like the Leatherman or the Roxon modular claw.
Having it be tapered and sharpened on the side that it is, the can opener is very difficult to use, as it wants to follow the orientation of the edge, like a chisel-ground blade. But instead of sinking to the left (away from the rim) as it cuts into the lid, the tip sinks to the right, making the tip scrape against the rim and wall. This, in turn, makes the can opener create metal filings, and it throws off the direction of the cut, making it extremely difficult to follow-up on that cut and advance around the rim.
The initial punching through the rim was hard, which is odd. Even the worst can openers so far had a decent first cut. The lid unrolled where the first cut was attempted, making it impossible to continue cutting from there. A second initial cut had to be made. The edge is very well sharpened, so the can opener has no trouble cutting through the lid. The thing, is, it cuts arguably too well. It is so aggressive, that it cuts easily, making it very easy to cut in the wrong direction and throw off the cut orientation.
Comfort is bad. The blade spine dug into my fingers. The entire process was slow, and cumbersome. The can opener slipped and jammed now and then.It is quite disheartening to see this claw look so good but perform so abysmally. If it was ground and sharpened on the opposite sides than it is, to match a Leatherman claw, it would surely be much better. I will give this another chance, maybe make shorter cuts, and place the tip a little ways away from the rim, to hopefully prevent it from scrape against the rim and wall, and make it cut and trace properly.
-
Top: Grand Harvest and Bucktool, both tapered and sharpened on the opposite sides of a Leatherman Claw. No wonder they both suck.
Bottom: Leatherman Core and Roxon Flex with claw. Both are sharpened and tapered on the opposite side of Grand Harvest and Buck, and performance is excellent.
A claw does not need both bevels to be the same as a Leatherman to make it a good can opener. Wenger is tapered on opposite side of Leatherman claw, but sharpened on the same side.
-
@ReamerPunch said:
GrandHarvest 26-SWSince I posted the review for that can opener, they changed the item listing pictures.
Before, you could see the can opener clearly not placed correctly on the can.
Now, you can barely see the can and the can opener tip. Still not placed correctly, though.
-
Field Ration Eating Device (F.R.E.D)
https://en.wikipedia.org/wiki/Field_ration_eating_device
The F.R.E.D. is the Australian version of the P-38 can opener. The blade piece and cutting edge are nearly identical to the P-38, as was performance.

Despite being larger than the P-51, the FRED performs much more closely to the P-38. The increased length of the spoon end would theoretically provide some additional leverage, but at the same time, the P-51 seems to be the perfect length for this. The FRED's edge length is also a little shorter than the P-51, so you will make slightly shorter cuts. Also, the last time I saw a hinge this oversized was in Schindler's List. The P-38 and P-51 have small, unobtrusive hinges.
Initial punching through was extremely easy.
Comfort-wise, not good, not bad. My thumb kept pushing against the bottle opener tooth, so I had to adjust my grip a few times.
It never jammed and never slipped off the can rim.
Cutting and tracing around the lid was easy. The edge is at a perfect angle to keep advancing with each cut. The tool weighs almost nothing so fatigue would occur only with an improper grip. The last cut, to completely remove the lid from the can, was also easy. Some can openers struggle to cut off the lid at the end, but the FRED had no trouble. The FRED left behind a somewhat jagged edge, very similar to what the P-38 did.As with the P-38, I did notice some metallic dust when I was done. This is not ideal. The P-51 left no dust behind. More testing will be done, but in short, this is a P-38 with a bottle-opener and an ice-cream spoon on it. The P-51 is smaller, more comfortable, will get the can opened in fewer cuts, and it does not leave any metal dust behind. If you are looking for a compact can opener to tuck into a wallet, the P-58 is the way to go.

2 points for punching through.
2 for comfort.
2 for not jamming.
1 for cutting.
2 for not slipping.Total: 9
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Nice work, RP!
