EDC Bit Ratchets
-
@ReamerPunch said:
That is the same head as the Prestacycle one, and it also offers T-handle configuration feature. US and Aus Amazon do not have the Facom one. I do have the Prestacycle coming soon.
I've got a total of seven ratchets on the way. A few big players in the edc scene, a couple of random ones, and a couple that I've never seen mentioned before.Prestacycle's one looks cool too, and is even cheaper ! (but doesn't seem have the bendable head, depends on the intended use)
-
Prestacycle and Topeak have arrived.


-
@ReamerPunch said:
Prestacycle and Topeak have arrived.

Looking forward to your thoughts on the Topeak, I'm still tempted by it :ahhh
-
More ratchets! :ahhh
This package must have been the fastest from Amazon. Just a week.Titan Swivel Head
Aeloa key-chain ratchet
GreaTalent ratchet kit.
Ovatt ratchet kit
And Engineer pliers with the cover.

-

Pending reviews:

-
:ahhh
Big thanks to m47mu74nt whose generosity helped get me this!

-
-
I'll review the Victorinox first.
Here are the three Engineer pliers I have.
P57. The small one. Only works on small screws, pretty good, decent leverage.
P55. Simple dipped handles. Good leverage. Much larger head. Also has teeth behind pivot.
P58. Amazingly soft, comfortable rubber handles. Spring-loaded pliers. Also has wire-cutters. Got the matching cap to keep the tool closed. These were $30, dropped to $22, so I got them.Finish is not perfect, but the tolerances are.

-
-
I'll post the last review of ratchets I already had, before all these came in the mail. Then I'll start working on the new arrivals.
There are seven ratchets that I have, that have not been reviewed:
- Victorinox
- Topeak Rocket
- Prestacycle Pro T-handle
- Aeloa keychain ratchet
- Ovatt ratchet set
- GreaTalent ratchet set
- Titan Swivel Head
I'll do the Victorinox first out of those. Does anyone have any preferences as to which should follow?
-

Trojan Mini Ratchet Set
Warranty: Lifetime
Weight: 49g
Length: 95mm
Head width: 19mm
Head clearance with standard bit: 30mm (adds 5mm)
Teeth count: 60
Minimum swing arc: 6°
Bit retention: magnet
In-line driver retention: magnet
Extension bit retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $16 with 5 sockets, 13 bits, a socket adapter, a bit extension, and a case
Bits: Flat 4/5.5/6.5, Phillips 1/2/3, Allen 3/4/5/6, Torx 10/15/20/25, socket adapter
Sockets: 4/5/6/8/10Accessories
The Trojan comes in a case, with bits, sockets, and an extension. A solid kit, but the case was not made for this set, so it is much bulkier than it needs to be. Nothing falls out of its position when the case is flipped or shaken.
(Note: My case was modified to accommodate a longer extension, as the set's extension was taken for another kit).
Dimensions
The ratchet is of a good length and good weight. The head is narrow, allowing access to tight spots, but the ratcheting bit slot protrudes quite significantly from the frame.
Teeth Count
The Trojan has 60 teeth, with a 6 degree arc swing. This is high enough to make the ratchet easy to work with, and able to turn fasteners even with little room to swing.Bit Retention
The Trojan uses magnets for both slots. This makes the ratcheting slot clearance higher than that of the other tools. The magnets are rather strong, making bits with thin ends and stubby bits a little tricky to remove.Bit compatibility
Stubby bits are not easy to remove, because there is not enough real estate to grab onto and the magnets are strong.
Standard double-ended bits will not work as both driver sockets are too shallow for them to engage and turn properly.
Leatherman proprietary bits can be used in the ratcheting bit socket but they can move significantly from side to side.
Switch action
The Trojan has a very stiff and quite low-profile switch. It does not get bumped accidentally. The switch is easy to operate, thanks to its flared end. It sits flush on a flat surface and does not catch on things easily.Ease of use
The Trojan has an off-set handle, to allow a more comfortable grip. The ratcheting bit socket has some wobble to it, but it still feels robust. Using the in-line driver socket feels great, thanks to the flattened stem, as opposed to the cylindrical ones of other tools. There is also some texture to provide traction, and the head also helps with the general effort. Ergonomics are wonderful. The off-set body offers different grips. All edges are charmfered with no hotspots.
The head is narrow, allowing the tool to turn fasteners in tight spots. The high teeth count also helps. Due to the magnetic bit retention, the ratcheting bit socket adds 5mm to the bit length, so clearance may not be enough to access certain fasteners.
The in-line driving socket works very well, providing reach as well as speed.
It does not have a knurled finger wheel.
Construction Quality
The Trojan is well enough built but averagely finished. The ratcheting bit socket has a lot of wobble in the frame. The body is polished but there are minor casting imperfections as well as pitting on most surfaces. Still, nothing affects performance. Nothing is crooked, jagged, rough, or really bad. The handle in nicely rounded, and very comfortable at that. The ratcheting mechanism works properly with no issues. The magnets do a good job holding the bits in place. Both bit sockets are precisely machined.Portability
The Trojan has a very long ratcheting bit socket. This makes it unsuitable for small edc pouches, as the slot will protrude too much. It may fit sideways, so not all is lost. It is still rather compact. It also comes in a case with accessories, although this has too much unused space. It would be better to remove all desired accessories and put them in a small pouch to save space.
Value
There is some undisputed value to this set. There is a nice assortment of bits and sockets, and a bit extension. The ratchet has excellent ergonomics and great features. For the price, it is a good purchase. It also has a lifetime warranty, which is excellent.Conclusion
This is a decent ratchet set for the price, especially considering the lifetime warranty. The ratchet is quite robust and very comfortable to use, it has a high teeth count and an in-line bit driver socket. Still, this ratchet is not the best choice for an edc pouch. It has a somewhat awkward shape that will take more space than is necessary. It would be better suited as a dedicated complimentary set in a toolbox or kitchen drawer.
Pros
-Lifetime warranty.
-Comes with bits, sockets, extension, and case.
-Great ergonomics for both driver sockets.
-Robust build.
-High teeth count.
-Inexpensive.Cons
-Average fit and finish.
-Ratchet head slot protrudes too much.
-Case is too big for kit.If you liked this ratchet, also check out:
-
Such a excellent thread. Thank you for doing this.
-
Great thread I cant believe I am only seeing it just now?!
Here are a few of mine both ot yet mentioned maybe and with others already reviewed for size comparisons.
The really Tiny one is another Titan I think and it has no teeth but instead is one of the Clutch Pack Mechanisms with infinite teeth sort of.
This one also reverses by just sliding the Socket holder back and forth through the tool to change directionThen there is another more conventional Titan.
3rd is a Wera which is crazy smooth and well finished and with a handle big enough to get a real grip on as well.
This is part of the Tool Check Kit which is really nice that I got cheap somehow on sale a few years ago.I also have a few more but they are in Bike Bags at another location right now.

-

Victorinox Ratchet
Max torque rating: 30 nm / 22 ft lb
Weight
Ratchet: 35g
Extension bar: 21g
Bit holder with 10 bits: 58gLength: 105mm
Head width: 14mm
Head clearance with standard bit: 25mm (adds 0mm)
Teeth count: 38
Minimum swing arc: 9.5°
Bit retention: spring
In-line driver retention: spring
Extension bit retention: spring
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $65 with 6 bits, bit holder, and extension bar
Bits: Allen 3 and 4, Phillips 0 and 3, Torx 10 and 15
This was acquired with help from m47mu74nt.
Accessories
The Victorinox comes with six standard 1/4" bits, a bit holder, and an extension bar. The ratchet snaps onto the bit holder. There are ten spots for standard bits, so any can be carried.
Dimensions
At 105mm, this is still compact while also providing excellent amounts of torque for what it is. It is also very lightweight.
The head is 14mm wide, making it the narrowest head available. This is even narrower than the Topeak, Giant, PK Tools etc, which have a 15mm wide head.
Teeth Count
At 38, the teeth count is rather low. The minimum swing arc to engage a tooth and get the fastener to turn will be 9.5 degrees. This may prove too much, and if you are working in very confined spaces, it may not be possible to turn the fastener at all.Bit Retention
The ratchet end has a spring that holds bits firmly. This detent is very much needed, as the ratchet head is a pass-through one. Should the bits be pushed a little too much, they will simply come out the back. This matters more with bits that can cam out easily, like Phillips, but less so with bits that engage the fasteners tightly, like Allen, Robertson, and Pozidrive.
The in-line driver and extension bar have springs, and also offer excellent retention.Bit compatibility
Bits with retention notches work the best, be they regular bits, Leatherman bits, impact bits, etc. Thanks to the ratchet being a pass-through design, it will work with all sorts of double-ended bits, as long as the ratchet spring has something to grip on to. Bits with ball bearings also fair well.
Bits with no notches are not held well in the ratchet, and will be pushed through the back. Users can limit this by pushing on the back of the bits with their thumbs. Extensions will also eliminate bits coming out, and will allow the ratchet to bear down on the bits and fasteners.The in-line driver and the extension bar have an interesting design. While deep enough to accommodate double ended bits, be they standard or Leatherman, there is a shoulder that standard bits and even stubby bits sit on. This, combined with the spring detent rather than magnets, means that the extension bar and in-line driver are compatible with every bit, as long as it is 1/4" hex.
Extensions with short hex shanks work the best, as the pass-through head of the ratchet will bottom out on the bit socket.
Long extensions can be fed through the ratchet head, for a T-handle arrangement and more torque for the in-line driver.
Switch action
The Victorinox ratchet does not have a switch. The ratchet is one-way, so to get the action to reverse, you have to insert the bits the other way around. This design allows for a more robust mechanism compared to conventional reversing ratchets. There is no way that the action will be reversed in the middle of driving a fastener. No switch to bump or get caught on anything.
This also means that the ratchet is not able to make quick, precise adjustments back and forth, to dial in a fastener to the desired specific torque. With other ratchets, if a fastener is overtightened, it would be easy to reverse the action with a switch, without removing the ratchet from the fastener. The Victorinox ratchet will require being removed from the bit/extension, and inserted the other way. And if the fastener gets a little too loose, then the ratchet would have to be removed again, and placed in reverse, until the fastener is tightened to the desired torque level. When these precise adjustments are required, it is much quicker and easier to use the in-line driver, possibly aided by the extension for some more torque.Ease of use
The Victorinox ratchet is user friendly, although a few caveats exist.
As it is a pass-through ratchet, bits can be pushed through with enough force. This can be eliminated by pushing on the back of bits with a thumb, or simply using the extension. Bits with the retention notches are still quite secure.
The extension can also be used to increase torque, in the L-wrench configuration, when using the in-line driver, as the tool does not have any knurling.
Using the L-wrench configuration is desirable for precision work. Since the ratchet is one-way, the whole ratchet has to be removed and inserted the other way to reverse the action. This will get tiresome, trying to tinker with the perfect torque.
There is no knurled finger wheel, and the ratchet only has 38 teeth, so this is not as versatile as other ratchets.Still, unless you are working in extremely confined spaces, the ratchet will be effective.
With the Victorinox logo on the outside, the ratchet is tightening. Once used to that, it is easy to insert the bit/extension the way you need.
The one-way ratchet head means that there is no way to accidentally reverse the action while in the middle of turning a fastener.
The ratchet also has an in-line bit socket, which comes in handy.
The pass-through head also eliminates any difficulties with removing bits. This will never be a problem.
The bit holder holds the bits, which makes sense. The bits are held well, and the ratchet also snaps onto the holder, and all are easy to remove.
The ratchet is not user-serviceable, but it is quite tough and also backed by an unlimited lifetime warranty.
Construction Quality
The Victorinox ratchet is unsurprisingly very well-made. No imperfections of any sort exist on it. All surfaces have a consistent finish, and are rounded off and polished beautifully. The ratchet mechanism works flawlessly.
As it has 38 teeth, these are larger and more resilient than finer teeth in ratchets with a higher teeth count. This, combined with the one-way ratcheting head, makes the Victorinox ratchet extremely robust and reliable.Portability
Although it falls in the longer side of edc ratchets, the Victorinox ratchet is still short enough to ride comfortably in any edc pouch. Thanks to its streamlined design, it takes up very little space. The ratchet head lacks the thickness of conventional ratchets, and there is no protruding switch to get in the way. It will also fit in multi-tool cases and pen sleeves.
Thanks to the hole being as large as it can be, the ratchet head can fit larger carabiners than most compact ratchets. It may be a little too long for a key-chain.
The ratchet can snap onto the bit holder, and the extension could be inserted into the ratchet itself, but this arrangement may occupy more space than necessary. If carried in a multi-tool pouch like this, the extension will protrude a little too much and may be required to be carried in a different fashion.
Value
This set is not easy to find, at least at a decent price. The set that does not include the extension is still up there. This is understandable to some degree. The ratchet is of very high quality, well-made, comfortable, reliable. It is also manufactured in Switzerland, and backed by the legendary Victorinox lifetime warranty. This is a tool that will be bought once and last a lifetime.Conclusion
There is no denying that the Victorinox ratchet oozes quality. When talking about compact bit ratchets as companions to multi-tools, this is the pioneer. Victorinox made this specifically to compliment their multi-tool line and it shows. It is lightweight but very rugged, versatile, streamlined, and indeed pairs up very well with other tools.It would have been even nicer to see this come with more bits, as it only comes with six. The ratchet also has a rather low teeth count, and is a one-way, pass-through design, so users will have to get used to everything that comes with those.
However, as with all high quality tools, the Victorinox ratchet is elegant, tough, it has some nice and useful features, it is versatile, and even if it does not last a lifetime, the Victorinox warranty will make sure that it does.
Pros
-Unlimited lifetime warranty.
-Exceptional quality.
-Pass-through design adds no length to bit clearance.
-One-way ratchet head design adds to robustness.
-Ultimate bit compatibility.
-Pass-through design allows T-handle configuration with long extensions.Cons
-Rather expensive.
-Extension is not easy to find, either in a set or separately.
-Lower teeth count than competition.
-Comes with no case and only six bits.If you liked this ratchet, also check out:
-
-
I've got the Prestacycle and Topeak reviews written. I'll find some time to take pictures and I'll post those two next.

-
-
-
I'm seeing the same mini ratchets over and over again in Amazon.

If anyone has any suggestions, please let me know.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


, but I also am for any other of your ratchet reviews
)

















































