Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunchR
    ReamerPunchR
    ReamerPunch
    Global Moderators
    wrote on last edited by
    #51

    I'll post the last review of ratchets I already had, before all these came in the mail. Then I'll start working on the new arrivals.

    There are seven ratchets that I have, that have not been reviewed:

    1. Victorinox
    2. Topeak Rocket
    3. Prestacycle Pro T-handle
    4. Aeloa keychain ratchet
    5. Ovatt ratchet set
    6. GreaTalent ratchet set
    7. Titan Swivel Head

    I'll do the Victorinox first out of those. Does anyone have any preferences as to which should follow?

    1 Reply Last reply
    0
    • ReamerPunchR
      ReamerPunchR
      ReamerPunch
      Global Moderators
      wrote on last edited by ReamerPunch
      #52

      Trojan Mini Ratchet Set

      Warranty: Lifetime
      Weight: 49g
      Length: 95mm
      Head width: 19mm
      Head clearance with standard bit: 30mm (adds 5mm)
      Teeth count: 60
      Minimum swing arc: 6°
      Bit retention: magnet
      In-line driver retention: magnet
      Extension bit retention: magnet
      Bit material: Chromium-Vanadium steel
      Handle material: Chromium-Vanadium steel
      Price: $16 with 5 sockets, 13 bits, a socket adapter, a bit extension, and a case
      Bits: Flat 4/5.5/6.5, Phillips 1/2/3, Allen 3/4/5/6, Torx 10/15/20/25, socket adapter
      Sockets: 4/5/6/8/10

      Accessories
      The Trojan comes in a case, with bits, sockets, and an extension. A solid kit, but the case was not made for this set, so it is much bulkier than it needs to be. Nothing falls out of its position when the case is flipped or shaken.
      (Note: My case was modified to accommodate a longer extension, as the set's extension was taken for another kit).

      Dimensions
      The ratchet is of a good length and good weight. The head is narrow, allowing access to tight spots, but the ratcheting bit slot protrudes quite significantly from the frame.

      Teeth Count
      The Trojan has 60 teeth, with a 6 degree arc swing. This is high enough to make the ratchet easy to work with, and able to turn fasteners even with little room to swing.

      Bit Retention
      The Trojan uses magnets for both slots. This makes the ratcheting slot clearance higher than that of the other tools. The magnets are rather strong, making bits with thin ends and stubby bits a little tricky to remove.

      Bit compatibility
      Stubby bits are not easy to remove, because there is not enough real estate to grab onto and the magnets are strong.
      Standard double-ended bits will not work as both driver sockets are too shallow for them to engage and turn properly.
      Leatherman proprietary bits can be used in the ratcheting bit socket but they can move significantly from side to side.

      Switch action
      The Trojan has a very stiff and quite low-profile switch. It does not get bumped accidentally. The switch is easy to operate, thanks to its flared end. It sits flush on a flat surface and does not catch on things easily.

      Ease of use
      The Trojan has an off-set handle, to allow a more comfortable grip. The ratcheting bit socket has some wobble to it, but it still feels robust. Using the in-line driver socket feels great, thanks to the flattened stem, as opposed to the cylindrical ones of other tools. There is also some texture to provide traction, and the head also helps with the general effort. Ergonomics are wonderful. The off-set body offers different grips. All edges are charmfered with no hotspots.
      The head is narrow, allowing the tool to turn fasteners in tight spots. The high teeth count also helps. Due to the magnetic bit retention, the ratcheting bit socket adds 5mm to the bit length, so clearance may not be enough to access certain fasteners.
      The in-line driving socket works very well, providing reach as well as speed.
      It does not have a knurled finger wheel.

      Construction Quality
      The Trojan is well enough built but averagely finished. The ratcheting bit socket has a lot of wobble in the frame. The body is polished but there are minor casting imperfections as well as pitting on most surfaces. Still, nothing affects performance. Nothing is crooked, jagged, rough, or really bad. The handle in nicely rounded, and very comfortable at that. The ratcheting mechanism works properly with no issues. The magnets do a good job holding the bits in place. Both bit sockets are precisely machined.

      Portability
      The Trojan has a very long ratcheting bit socket. This makes it unsuitable for small edc pouches, as the slot will protrude too much. It may fit sideways, so not all is lost. It is still rather compact. It also comes in a case with accessories, although this has too much unused space. It would be better to remove all desired accessories and put them in a small pouch to save space.

      Value
      There is some undisputed value to this set. There is a nice assortment of bits and sockets, and a bit extension. The ratchet has excellent ergonomics and great features. For the price, it is a good purchase. It also has a lifetime warranty, which is excellent.

      Conclusion
      This is a decent ratchet set for the price, especially considering the lifetime warranty. The ratchet is quite robust and very comfortable to use, it has a high teeth count and an in-line bit driver socket. Still, this ratchet is not the best choice for an edc pouch. It has a somewhat awkward shape that will take more space than is necessary. It would be better suited as a dedicated complimentary set in a toolbox or kitchen drawer.

      Pros
      -Lifetime warranty.
      -Comes with bits, sockets, extension, and case.
      -Great ergonomics for both driver sockets.
      -Robust build.
      -High teeth count.
      -Inexpensive.

      Cons
      -Average fit and finish.
      -Ratchet head slot protrudes too much.
      -Case is too big for kit.

      If you liked this ratchet, also check out:

      1 Reply Last reply
      0
      • AlohaA
        AlohaA
        Aloha
        Global Moderators
        wrote on last edited by
        #53

        Such a excellent thread. Thank you for doing this.

        1 Reply Last reply
        0
        • ezdogE
          ezdogE
          ezdog
          wrote on last edited by
          #54

          Great thread I cant believe I am only seeing it just now?!

          Here are a few of mine both ot yet mentioned maybe and with others already reviewed for size comparisons.

          The really Tiny one is another Titan I think and it has no teeth but instead is one of the Clutch Pack Mechanisms with infinite teeth sort of.
          This one also reverses by just sliding the Socket holder back and forth through the tool to change direction

          Then there is another more conventional Titan.

          3rd is a Wera which is crazy smooth and well finished and with a handle big enough to get a real grip on as well.
          This is part of the Tool Check Kit which is really nice that I got cheap somehow on sale a few years ago.

          I also have a few more but they are in Bike Bags at another location right now.

          1 Reply Last reply
          0
          • ReamerPunchR
            ReamerPunchR
            ReamerPunch
            Global Moderators
            wrote on last edited by ReamerPunch
            #55

            Victorinox Ratchet

            Max torque rating: 30 nm / 22 ft lb

            Weight
            Ratchet: 35g
            Extension bar: 21g
            Bit holder with 10 bits: 58g

            Length: 105mm
            Head width: 14mm
            Head clearance with standard bit: 25mm (adds 0mm)
            Teeth count: 38
            Minimum swing arc: 9.5°
            Bit retention: spring
            In-line driver retention: spring
            Extension bit retention: spring
            Bit material: Chromium-Vanadium steel
            Handle material: Chromium-Vanadium steel
            Price: $65 with 6 bits, bit holder, and extension bar
            Bits: Allen 3 and 4, Phillips 0 and 3, Torx 10 and 15
            This was acquired with help from m47mu74nt. :salute:

            Accessories
            The Victorinox comes with six standard 1/4" bits, a bit holder, and an extension bar. The ratchet snaps onto the bit holder. There are ten spots for standard bits, so any can be carried.

            Dimensions
            At 105mm, this is still compact while also providing excellent amounts of torque for what it is. It is also very lightweight.
            The head is 14mm wide, making it the narrowest head available. This is even narrower than the Topeak, Giant, PK Tools etc, which have a 15mm wide head.

            Teeth Count
            At 38, the teeth count is rather low. The minimum swing arc to engage a tooth and get the fastener to turn will be 9.5 degrees. This may prove too much, and if you are working in very confined spaces, it may not be possible to turn the fastener at all.

            Bit Retention
            The ratchet end has a spring that holds bits firmly. This detent is very much needed, as the ratchet head is a pass-through one. Should the bits be pushed a little too much, they will simply come out the back. This matters more with bits that can cam out easily, like Phillips, but less so with bits that engage the fasteners tightly, like Allen, Robertson, and Pozidrive.
            The in-line driver and extension bar have springs, and also offer excellent retention.

            Bit compatibility
            Bits with retention notches work the best, be they regular bits, Leatherman bits, impact bits, etc. Thanks to the ratchet being a pass-through design, it will work with all sorts of double-ended bits, as long as the ratchet spring has something to grip on to. Bits with ball bearings also fair well.
            Bits with no notches are not held well in the ratchet, and will be pushed through the back. Users can limit this by pushing on the back of the bits with their thumbs. Extensions will also eliminate bits coming out, and will allow the ratchet to bear down on the bits and fasteners.

            The in-line driver and the extension bar have an interesting design. While deep enough to accommodate double ended bits, be they standard or Leatherman, there is a shoulder that standard bits and even stubby bits sit on. This, combined with the spring detent rather than magnets, means that the extension bar and in-line driver are compatible with every bit, as long as it is 1/4" hex.

            Extensions with short hex shanks work the best, as the pass-through head of the ratchet will bottom out on the bit socket.
            Long extensions can be fed through the ratchet head, for a T-handle arrangement and more torque for the in-line driver.

            Switch action
            The Victorinox ratchet does not have a switch. The ratchet is one-way, so to get the action to reverse, you have to insert the bits the other way around. This design allows for a more robust mechanism compared to conventional reversing ratchets. There is no way that the action will be reversed in the middle of driving a fastener. No switch to bump or get caught on anything.
            This also means that the ratchet is not able to make quick, precise adjustments back and forth, to dial in a fastener to the desired specific torque. With other ratchets, if a fastener is overtightened, it would be easy to reverse the action with a switch, without removing the ratchet from the fastener. The Victorinox ratchet will require being removed from the bit/extension, and inserted the other way. And if the fastener gets a little too loose, then the ratchet would have to be removed again, and placed in reverse, until the fastener is tightened to the desired torque level. When these precise adjustments are required, it is much quicker and easier to use the in-line driver, possibly aided by the extension for some more torque.

            Ease of use
            The Victorinox ratchet is user friendly, although a few caveats exist.
            As it is a pass-through ratchet, bits can be pushed through with enough force. This can be eliminated by pushing on the back of bits with a thumb, or simply using the extension. Bits with the retention notches are still quite secure.
            The extension can also be used to increase torque, in the L-wrench configuration, when using the in-line driver, as the tool does not have any knurling.
            Using the L-wrench configuration is desirable for precision work. Since the ratchet is one-way, the whole ratchet has to be removed and inserted the other way to reverse the action. This will get tiresome, trying to tinker with the perfect torque.
            There is no knurled finger wheel, and the ratchet only has 38 teeth, so this is not as versatile as other ratchets.

            Still, unless you are working in extremely confined spaces, the ratchet will be effective.
            With the Victorinox logo on the outside, the ratchet is tightening. Once used to that, it is easy to insert the bit/extension the way you need.
            The one-way ratchet head means that there is no way to accidentally reverse the action while in the middle of turning a fastener.
            The ratchet also has an in-line bit socket, which comes in handy.
            The pass-through head also eliminates any difficulties with removing bits. This will never be a problem.
            The bit holder holds the bits, which makes sense. The bits are held well, and the ratchet also snaps onto the holder, and all are easy to remove.
            The ratchet is not user-serviceable, but it is quite tough and also backed by an unlimited lifetime warranty.

            Construction Quality
            The Victorinox ratchet is unsurprisingly very well-made. No imperfections of any sort exist on it. All surfaces have a consistent finish, and are rounded off and polished beautifully. The ratchet mechanism works flawlessly.
            As it has 38 teeth, these are larger and more resilient than finer teeth in ratchets with a higher teeth count. This, combined with the one-way ratcheting head, makes the Victorinox ratchet extremely robust and reliable.

            Portability
            Although it falls in the longer side of edc ratchets, the Victorinox ratchet is still short enough to ride comfortably in any edc pouch. Thanks to its streamlined design, it takes up very little space. The ratchet head lacks the thickness of conventional ratchets, and there is no protruding switch to get in the way. It will also fit in multi-tool cases and pen sleeves.
            Thanks to the hole being as large as it can be, the ratchet head can fit larger carabiners than most compact ratchets. It may be a little too long for a key-chain.
            The ratchet can snap onto the bit holder, and the extension could be inserted into the ratchet itself, but this arrangement may occupy more space than necessary. If carried in a multi-tool pouch like this, the extension will protrude a little too much and may be required to be carried in a different fashion.

            Value
            This set is not easy to find, at least at a decent price. The set that does not include the extension is still up there. This is understandable to some degree. The ratchet is of very high quality, well-made, comfortable, reliable. It is also manufactured in Switzerland, and backed by the legendary Victorinox lifetime warranty. This is a tool that will be bought once and last a lifetime.

            Conclusion
            There is no denying that the Victorinox ratchet oozes quality. When talking about compact bit ratchets as companions to multi-tools, this is the pioneer. Victorinox made this specifically to compliment their multi-tool line and it shows. It is lightweight but very rugged, versatile, streamlined, and indeed pairs up very well with other tools.

            It would have been even nicer to see this come with more bits, as it only comes with six. The ratchet also has a rather low teeth count, and is a one-way, pass-through design, so users will have to get used to everything that comes with those.

            However, as with all high quality tools, the Victorinox ratchet is elegant, tough, it has some nice and useful features, it is versatile, and even if it does not last a lifetime, the Victorinox warranty will make sure that it does.

            Pros
            -Unlimited lifetime warranty.
            -Exceptional quality.
            -Pass-through design adds no length to bit clearance.
            -One-way ratchet head design adds to robustness.
            -Ultimate bit compatibility.
            -Pass-through design allows T-handle configuration with long extensions.

            Cons
            -Rather expensive.
            -Extension is not easy to find, either in a set or separately.
            -Lower teeth count than competition.
            -Comes with no case and only six bits.

            If you liked this ratchet, also check out:

            1 Reply Last reply
            0
            • m47mu74ntM
              m47mu74ntM
              m47mu74nt
              wrote on last edited by
              #56

              :hatsoff:
              Thank you a lot for this review, it showed some pros/cons I had not considered, I am very happy I helped you getting one :cheers:

              1 Reply Last reply
              0
              • ReamerPunchR
                ReamerPunchR
                ReamerPunch
                Global Moderators
                wrote on last edited by
                #57

                I've got the Prestacycle and Topeak reviews written. I'll find some time to take pictures and I'll post those two next. :cheers:

                1 Reply Last reply
                0
                • Adam5A
                  Adam5A
                  Adam5
                  wrote on last edited by
                  #58

                  Thank you very much for the excellent qualitative reviews RP :tu: :tu: :like:

                  Excellent work! :cheers:

                  Now, if we could just get Todd Osgood to test them all out... 😄

                  1 Reply Last reply
                  0
                  • ReamerPunchR
                    ReamerPunchR
                    ReamerPunch
                    Global Moderators
                    wrote on last edited by
                    #59

                    @Adam5 said:
                    Thank you very much for the excellent qualitative reviews RP :tu: :tu: :like:

                    Excellent work! :cheers:

                    Now, if we could just get Todd Osgood to test them all out... 😄

                    I suggested compact bit ratchets. I erally hope he gives this a go! :like:

                    1 Reply Last reply
                    0
                    • ReamerPunchR
                      ReamerPunchR
                      ReamerPunch
                      Global Moderators
                      wrote on last edited by
                      #60

                      I'm seeing the same mini ratchets over and over again in Amazon. :think:
                      If anyone has any suggestions, please let me know. :cheers:

                      1 Reply Last reply
                      0
                      • ReamerPunchR
                        ReamerPunchR
                        ReamerPunch
                        Global Moderators
                        wrote on last edited by ReamerPunch
                        #61

                        Ratchets reviewed so far

                        1 Reply Last reply
                        0
                        • ReamerPunchR
                          ReamerPunchR
                          ReamerPunch
                          Global Moderators
                          wrote on last edited by ReamerPunch
                          #62

                          Prestacycle Pro T-Handle Ratchet

                          Warranty: Lifetime
                          Weight
                          Ratchet: 55g
                          Extension: 33g
                          Set: 190g

                          Max torque rating: 60 Nm / 44 ft lb
                          Length: 114mm
                          Extension length: 100mm
                          Head width: 18mm
                          Head clearance with standard bit: 27mm (adds 2mm)
                          Teeth count: 60
                          Minimum swing arc: 6°
                          Bit retention: spring
                          Extension bit retention: magnet
                          In-line driver retention: magnet
                          Bit material: Chromium-Vanadium steel
                          Handle material: Chromium- Vanadium steel
                          Price: $40 with 12 bits, extension, and wallet
                          Bits: Torx 10/20/25/30, Phillips 1, Allen 2/2.5/3/4/5/6/8

                          Accessories
                          The Prestacycle Pro T-Handle Ratchet comes with twelve Chromium-Vanadium standard 1/4" bits, a long extension, and a nylon wallet to carry everything.
                          There are elasticated loops for everything. The wallet is single-stitched, with a double-stitched belt-loop. There is also a 65mm x 100mm flat pocket for additional items. The wallet has velcro closure. The wallet is a simple folding one, and bits could theoretically slip out of their loops and fall out if the wallet is shaken hard enough.

                          Dimensions
                          This is the longest edc ratchet so far. At 55g, it is still lightweight enough for an edc pouch, although to utilize the T-handle special feature, the extension will also be necessary, and this is another 33g. At 18mm, the head is still among the narrowest available, and helps keep the ratchet quite compact.

                          Teeth Count
                          The Prestacycle has 60 teeth. Quite high for such a narrow head, this allows a minimum arc swing of six degrees. This is almost as good as it gets with these small ratchets.

                          Bit Retention
                          The ratcheting end has a spring, which provides a firm detent on bits even for bits without retention notches.
                          The in-line driver socket and the extension have magnets. These are way too strong for short bits to be removed with fingers.

                          Bit compatibility
                          The ratchet head can be used with double ended bits, be they Leatherman or standard. Thanks to the ratcheting head being almost a pass-though one, pretty much every sort of double ended bit will work. Leatherman bits can be inserted so that the spring engages the side-notches, but can be pushed through if pressing hard enough. They can be inserted so that the small tooth marked with the red dot can prevent them from being pushed through, but the retention spring will not be engaging, so they will fall out from the front.
                          Stubby bits are easy enough to remove, thanks to the hole in the head. Push from the back to get the bit started.
                          Bits and extensions with a grooved neck will have a lot of play, although they will not fall out and can still be used.

                          The in-line driver and extension have strong magnets and are somewhat deep, so stubby bits cannot be removed with just fingers.
                          Leatherman bits can be kind of used, but they barely engage and will have too much play left and right.
                          Standard double-ended bits cannot be used for in-line driving or the extension. They do not engage and cannot be turned with the tool.

                          Switch action
                          The switch is quite small and has a strong detent. It cannot be operated with a fingertip, and will require a fingernail. The switch sits flat against the body, and does not protrude in any way.

                          Ease of use
                          The Prestacycle can exert a great amount of torque thanks to its length. It is easy to grip for people with large hands, as some edc ratchets can be a little too compact.
                          There is a knurled finger wheel, to quickly turn loose fasteners that do not have enough drag for the ratchet.
                          The in-line driver is also quite handy.
                          Thanks to the almost pass-through head, any double-ended bit can be used with the tool.

                          Examining the ratchet head hole and the extension a little closer reveals the namesake of this ratchet. The hole is a 1/4" hex, that has a single tooth in one corner, which is marked with a red dot on either side of the ratchet head. This corresponds with the seven-sided extension rod. The edge that matches the dotted corner is marked with a step and a dotted line. Assembling the T configuration employs the same principle as the shape sorter toy. The extension only fits through the ratchet in one orientation. Any other position, and the extension will just sit in the ratchet like any other extension in any other ratchet.

                          This does mean that only one corner of the ratcheting head pushes against a bit, so this should be taken into account when bearing down on a fastener.

                          The T-Handle configuration provides far more torque than the ratchet head could, and safely so. If that much torque were to be applied on the ratchet head itself, the teeth might get damaged.
                          As this ratchet's head is wider than the typical compact bit ratchet, with a stem to match, this ratchet is among the strongest of this design, able to withstand greater abuse. Do not be a hero, though. It is still a small ratchet, designed for the bicycle community. It does have a lifetime warranty that offers peace of mind should things go south.

                          Construction Quality
                          The Prestacycle is a high quality tool. The fit and finish is immaculate. The magnets are perfectly centered. The polished finish is crisp and consistent. Everything is nicely chamfered. The ratchet mechanism works flawlessly. The T-handle feature works beautifully and is very easy to configure. All bit sockets are funneled to aid bit insertion. The extension has retention notches at the tip, and in the middle, for the T-handle configuration.

                          Portability
                          The Prestacycle is still a thin and narrow design, but a little long. It will fit nicely in an edc pouch along with the extension. It could be persuaded to fit in the side-sleeve of a multi-tool pouch with the extension, but this will not be perfect. The larger than average opening in the back of the head allows for larger carabiners than other compact ratchets. It will still fit into a pen sleeve.

                          Value
                          The Prestacycle ratchet with the extension and nothing else is $30. This is a little steep, but it is still a decent deal, considering everything the ratchet has to offer. The soft case set, which consists of the above wallet and twelve bits is $40, which is quite good, and the hard case set is $50. There are enough options to choose from, should you decide to get this.

                          Conclusion
                          The Prestacycle is a contender for the best compact bit ratchet. It is nicely made, with a high teeth count, the ability to convert it into a fixed T-handle driver, a good assortment of bits, a carry case if you need one, and arguably most importantly, a lifetime warranty.

                          The most impressive thing of this ratchet is the lack of negative qualities, especially compared to other ratchets we have seen. The issue of the soft case not holding the bits perfectly securely can be solved by getting just the ratchet and extension, or using another case, or getting the hard case. Chromium-Vanadium is not a premium bit material, but they do the job. If it is not up to your standards, you could get just the ratchet and extension, and then supplement those with a premium bit set.

                          The only reason not to get this ratchet would be something very specific, like space limitations, since it is the longest yet. Or if 60 teeth are simply not enough for a very particular application. As it is, this is a phenomenal tool that is simply better than the rest.

                          Pros
                          -Lifetime warranty.
                          -High quality.
                          -High number of teeth.
                          -T-handle configuration allows for additional torque.
                          -Nigh pass-though head works with all double-ended bits.
                          -Better grip for people with large hands.
                          -Many purchase options to choose from.

                          Cons
                          -None.

                          If you liked this ratchet, also check out:

                          1 Reply Last reply
                          0
                          • magentusM
                            magentusM
                            magentus
                            Admin Team
                            wrote on last edited by
                            #63

                            Really enjoying this thread m'dude :like: Thanks for all your effort

                            1 Reply Last reply
                            0
                            • ReamerPunchR
                              ReamerPunchR
                              ReamerPunch
                              Global Moderators
                              wrote on last edited by
                              #64

                              Thanks. :cheers:

                              1 Reply Last reply
                              0
                              • ReamerPunchR
                                ReamerPunchR
                                ReamerPunch
                                Global Moderators
                                wrote on last edited by
                                #65

                                I've got two more reviews written. I'll find some time to take pictures and post them soon. :cheers:

                                1 Reply Last reply
                                0
                                • m47mu74ntM
                                  m47mu74ntM
                                  m47mu74nt
                                  wrote on last edited by
                                  #66

                                  @ReamerPunch said:
                                  I've got two more reviews written. I'll find some time to take pictures and post them soon. :cheers:

                                  any updates? :pok:

                                  :whistle:

                                  1 Reply Last reply
                                  0
                                  • ReamerPunchR
                                    ReamerPunchR
                                    ReamerPunch
                                    Global Moderators
                                    wrote on last edited by
                                    #67

                                    I have five reviews written. Working on pictures now. I apologize for taking such a long break from this. Trying to keep up. But it turns out that I might not need surgery anymore. I'll have one posted today and the rest will follow. :salute:

                                    1 Reply Last reply
                                    0
                                    • ReamerPunchR
                                      ReamerPunchR
                                      ReamerPunch
                                      Global Moderators
                                      wrote on last edited by ReamerPunch
                                      #68

                                      Topeak Ratchet Rocket Lite

                                      (The ratchet can also be found branded by Blue Point, Granite, KS Tools, PowerTorque)

                                      Warranty: 2 years (with original purchaser receipt)
                                      Max torque rating: 30 nm / 22 ft lb
                                      Weight: 29g
                                      Set weight: 161g
                                      Length: 93mm
                                      Head width: 15mm
                                      Head clearance with standard bit: 25.5mm (adds 0.5mm)
                                      Teeth count: 52
                                      Minimum swing arc: 7°
                                      Bit retention: spring
                                      Extension bit retention: magnet
                                      In-line driver retention: magnet
                                      Bit material: S2 Steel
                                      Handle material: Chromium-Vanadium steel
                                      Price: $31 with 11 bits, two tire levers, extension, nylon case
                                      Bits: Allen 2/2.5/3/4/5/6/8, Phillips 2, Torx 10/15/25

                                      Accessories
                                      The Topeak Ratchet Rocket Lite DX comes with eleven S2 steel standard bits, an extension, two tire levers, and a nylon case to carry it all.
                                      The bits, tire levers, and the extension sit in elasticated loops. The ratchet itself snaps into a plastic holder. There is a flat 40x50mm pocket for additional gear, and a very narrow elasticated loop that can hold something thin. The case has velcro closure. The stitching is single for the sides and double for the top of the belt loop. The belt loop has velcro on one side, to allow adding or removing the case on a belt without needing to take off a belt, and it can also be attached to a bike frame. The belt loop velcro does not overlap 100% when the belt loop rests flat. To get it to overlap completely the belt loop has to be loose.
                                      This case does work, and although the ratchet will not come off its holder, the bits may slip out with enough movement.

                                      Dimensions
                                      The Topeak is absolutely minuscule. Only 93mm long, and with a 15mm wide head. It can fit in any edc pouch and will occupy very little real estate.

                                      Teeth Count
                                      The Topeak has 52 teeth, which equals to a 7 degree minimum swing arc. This, combined with the narrow head, allows the ratchet to reach places and turn fasteners other ratchets cannot.

                                      Bit Retention
                                      The ratchet head has a spring. This is very secure and holds bits firmly. It is in fact not easy to pull out bits that have retention notches. However, simply poking the bit from the back, through the hole of the ratchet head, pops the bit out of the spring, and it can then be removed very easily. This is an interesting feature, given that the Giant and PK Tools ratchets share the same head and spring design, but bits cannot be disengaged as easily by poking them from the back.

                                      The in-line driving socket has a magnet that is quite strong, making stubby bits and bits with thin tips a little hard to remove. This is the same size magnet as the PK Tools ratchet. The Giant had a smaller magnet.

                                      Bit compatibility
                                      Stubby bits are not easy to remove from the in-line driving socket.
                                      Standard double-sided bits and Leatherman bits can be used with the ratcheting head, as long as one end is thin enough to clear the hole in the back. Leatherman bits have to be inserted properly, with the spring engaging their retention notches.
                                      Double-sided bits cannot be used in the in-line driver. They do not engage the sides, and thus cannot be turned.
                                      Leatherman bits can be used, but they barely engage the sides and have a lot of play left and right.
                                      Bits with the grooved neck do not engage the ratchet spring, so they will have a lot of play back and forth, but they do not fall out.

                                      Bits with a more rounded back sit flush with the ratchet head, allowing the clearance to be whatever the bit length is.

                                      Switch action
                                      The action switch is ribbed, small, and with excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
                                      The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.

                                      Ease of use
                                      The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
                                      Stubby bits cannot be removed from the in-line driver easily.
                                      Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
                                      The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform well within the bicycle community.
                                      The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
                                      The high teeth count and knurled finger wheel make things quick.
                                      Both bit driver sockets are funneled to make bit insertion easier.
                                      The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.

                                      Construction Quality
                                      The Topeak is a high quality tool, with excellent fit and finish. Machining, assembly, finish, tolerances, centering, everything is flawless on this. There are no issues with this ratchet. It is very well-made, and it shows.

                                      The bit extension is not branded by Topeak, or anyone else, and it did not look new. There are scratches and dents all over it. This does not affect performance, but it looks rather out of place, next to a brand new and high quality ratchet and bits.

                                      Topeak offers a two-year warranty for their tools. Obtaining warranty service requires the original sales receipt. This is not the best warranty out there. Having the receipt is not always possible, and the warranty is only for two years. Still, this is much more than most ratchets we have seen.

                                      Portability
                                      Sharing first place in the weight department with the PK Tools ratchet, at only 29 grams, the Topeak is microscopic, and will disappear in edc pouches. It will not even be noticeable until needed. Thanks to the thin stem and narrow head, it will sit comfortably in all sorts of pouches, containers, pockets, etc. Nice and streamlined, it is a winner as far as portability goes.

                                      Value
                                      At $31 US, this is a good deal. The ratchet is high quality, the bits are high quality and there are eleven of them, there is a bit extension included, there are two tire levers, and the case is quite good, holding the ratchet securely, and it even has an extra pocket. There are other ratchets of very similar design and dimensions that cost less, but they will not include all that this set does. Of course the two tire levers may be of little use to some, but even then, this ratchet set is worth the investment.

                                      Conclusion
                                      Arguably the most well-known edc ratchet, the Topeak is undoubtedly a big player and already the edc ratchet of many. No surprises here. It is of great quality, absolutely tiny, with a high teeth count considering how narrow the head is, it has a finger wheel, an in-line driving socket, great bit retention, and comes in a nice kit.

                                      The best thing about the Topeak Ratchet Rocket is arguably its reliability. This is not a new tool. It has been around for many years, and it will definitely appear in any search for an edc, bike, compact, etc bit ratchet. It is a proven design, and is often the first recommendation for a compact ratchet kit for cyclists.

                                      It should be obvious that I recommend this. The form factor and quality of these micro ratchets is pretty much the same, so getting this or the PK Tools ratchet, or the Giant ratchet, or the Granite, Liv, Smato, etc, will be a very similar experience. It will come down to price, the set they come in, and of course availability.

                                      As it is, the Topeak is a great buy. You may not need the tire levers, but even then, they are useful on their own, or you could just gift them to a cyclist friend, and use the freed space for something else. The fact that bits can be removed so much more easily compared to ratchets that have the exact same head is also quite neat.

                                      Pros
                                      -Known to be reliable.
                                      -Excellent fit and finish.
                                      -Absolutely tiny.
                                      -Knurled disk allows quick turning of loose fasteners with fingertips.
                                      -Ratchet end compatible with many double-ended bits.
                                      -Thin and narrow head combined with high teeth count can work in the tightest of places.
                                      -Bits can be removed more easily compared to ratchets with the same head.

                                      Cons
                                      -Extension did not look new.
                                      -Warranty is only 2 years, and requires original sales receipt.

                                      If you liked this ratchet, also check out:

                                      1 Reply Last reply
                                      0
                                      • m47mu74ntM
                                        m47mu74ntM
                                        m47mu74nt
                                        wrote on last edited by
                                        #69

                                        :ahhh :ahhh :ahhh

                                        1 Reply Last reply
                                        0
                                        • TaskyT
                                          TaskyT
                                          Tasky
                                          wrote on last edited by
                                          #70

                                          I have to say, I'm still scared of losing my Topeak bits... but I've had it twisting and bounding around in my pockets for quite some time now, and not once found a bit even out of place, let alone fallen out.
                                          My extension was (and remains) unmarred, too.

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World