Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

EDC Bit Ratchets

Scheduled Pinned Locked Moved Reviews
377 Posts 1 Posters 118.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • ReamerPunchR
    ReamerPunchR
    ReamerPunch
    Global Moderators
    wrote on last edited by ReamerPunch
    #55

    Victorinox Ratchet

    Max torque rating: 30 nm / 22 ft lb

    Weight
    Ratchet: 35g
    Extension bar: 21g
    Bit holder with 10 bits: 58g

    Length: 105mm
    Head width: 14mm
    Head clearance with standard bit: 25mm (adds 0mm)
    Teeth count: 38
    Minimum swing arc: 9.5°
    Bit retention: spring
    In-line driver retention: spring
    Extension bit retention: spring
    Bit material: Chromium-Vanadium steel
    Handle material: Chromium-Vanadium steel
    Price: $65 with 6 bits, bit holder, and extension bar
    Bits: Allen 3 and 4, Phillips 0 and 3, Torx 10 and 15
    This was acquired with help from m47mu74nt. :salute:

    Accessories
    The Victorinox comes with six standard 1/4" bits, a bit holder, and an extension bar. The ratchet snaps onto the bit holder. There are ten spots for standard bits, so any can be carried.

    Dimensions
    At 105mm, this is still compact while also providing excellent amounts of torque for what it is. It is also very lightweight.
    The head is 14mm wide, making it the narrowest head available. This is even narrower than the Topeak, Giant, PK Tools etc, which have a 15mm wide head.

    Teeth Count
    At 38, the teeth count is rather low. The minimum swing arc to engage a tooth and get the fastener to turn will be 9.5 degrees. This may prove too much, and if you are working in very confined spaces, it may not be possible to turn the fastener at all.

    Bit Retention
    The ratchet end has a spring that holds bits firmly. This detent is very much needed, as the ratchet head is a pass-through one. Should the bits be pushed a little too much, they will simply come out the back. This matters more with bits that can cam out easily, like Phillips, but less so with bits that engage the fasteners tightly, like Allen, Robertson, and Pozidrive.
    The in-line driver and extension bar have springs, and also offer excellent retention.

    Bit compatibility
    Bits with retention notches work the best, be they regular bits, Leatherman bits, impact bits, etc. Thanks to the ratchet being a pass-through design, it will work with all sorts of double-ended bits, as long as the ratchet spring has something to grip on to. Bits with ball bearings also fair well.
    Bits with no notches are not held well in the ratchet, and will be pushed through the back. Users can limit this by pushing on the back of the bits with their thumbs. Extensions will also eliminate bits coming out, and will allow the ratchet to bear down on the bits and fasteners.

    The in-line driver and the extension bar have an interesting design. While deep enough to accommodate double ended bits, be they standard or Leatherman, there is a shoulder that standard bits and even stubby bits sit on. This, combined with the spring detent rather than magnets, means that the extension bar and in-line driver are compatible with every bit, as long as it is 1/4" hex.

    Extensions with short hex shanks work the best, as the pass-through head of the ratchet will bottom out on the bit socket.
    Long extensions can be fed through the ratchet head, for a T-handle arrangement and more torque for the in-line driver.

    Switch action
    The Victorinox ratchet does not have a switch. The ratchet is one-way, so to get the action to reverse, you have to insert the bits the other way around. This design allows for a more robust mechanism compared to conventional reversing ratchets. There is no way that the action will be reversed in the middle of driving a fastener. No switch to bump or get caught on anything.
    This also means that the ratchet is not able to make quick, precise adjustments back and forth, to dial in a fastener to the desired specific torque. With other ratchets, if a fastener is overtightened, it would be easy to reverse the action with a switch, without removing the ratchet from the fastener. The Victorinox ratchet will require being removed from the bit/extension, and inserted the other way. And if the fastener gets a little too loose, then the ratchet would have to be removed again, and placed in reverse, until the fastener is tightened to the desired torque level. When these precise adjustments are required, it is much quicker and easier to use the in-line driver, possibly aided by the extension for some more torque.

    Ease of use
    The Victorinox ratchet is user friendly, although a few caveats exist.
    As it is a pass-through ratchet, bits can be pushed through with enough force. This can be eliminated by pushing on the back of bits with a thumb, or simply using the extension. Bits with the retention notches are still quite secure.
    The extension can also be used to increase torque, in the L-wrench configuration, when using the in-line driver, as the tool does not have any knurling.
    Using the L-wrench configuration is desirable for precision work. Since the ratchet is one-way, the whole ratchet has to be removed and inserted the other way to reverse the action. This will get tiresome, trying to tinker with the perfect torque.
    There is no knurled finger wheel, and the ratchet only has 38 teeth, so this is not as versatile as other ratchets.

    Still, unless you are working in extremely confined spaces, the ratchet will be effective.
    With the Victorinox logo on the outside, the ratchet is tightening. Once used to that, it is easy to insert the bit/extension the way you need.
    The one-way ratchet head means that there is no way to accidentally reverse the action while in the middle of turning a fastener.
    The ratchet also has an in-line bit socket, which comes in handy.
    The pass-through head also eliminates any difficulties with removing bits. This will never be a problem.
    The bit holder holds the bits, which makes sense. The bits are held well, and the ratchet also snaps onto the holder, and all are easy to remove.
    The ratchet is not user-serviceable, but it is quite tough and also backed by an unlimited lifetime warranty.

    Construction Quality
    The Victorinox ratchet is unsurprisingly very well-made. No imperfections of any sort exist on it. All surfaces have a consistent finish, and are rounded off and polished beautifully. The ratchet mechanism works flawlessly.
    As it has 38 teeth, these are larger and more resilient than finer teeth in ratchets with a higher teeth count. This, combined with the one-way ratcheting head, makes the Victorinox ratchet extremely robust and reliable.

    Portability
    Although it falls in the longer side of edc ratchets, the Victorinox ratchet is still short enough to ride comfortably in any edc pouch. Thanks to its streamlined design, it takes up very little space. The ratchet head lacks the thickness of conventional ratchets, and there is no protruding switch to get in the way. It will also fit in multi-tool cases and pen sleeves.
    Thanks to the hole being as large as it can be, the ratchet head can fit larger carabiners than most compact ratchets. It may be a little too long for a key-chain.
    The ratchet can snap onto the bit holder, and the extension could be inserted into the ratchet itself, but this arrangement may occupy more space than necessary. If carried in a multi-tool pouch like this, the extension will protrude a little too much and may be required to be carried in a different fashion.

    Value
    This set is not easy to find, at least at a decent price. The set that does not include the extension is still up there. This is understandable to some degree. The ratchet is of very high quality, well-made, comfortable, reliable. It is also manufactured in Switzerland, and backed by the legendary Victorinox lifetime warranty. This is a tool that will be bought once and last a lifetime.

    Conclusion
    There is no denying that the Victorinox ratchet oozes quality. When talking about compact bit ratchets as companions to multi-tools, this is the pioneer. Victorinox made this specifically to compliment their multi-tool line and it shows. It is lightweight but very rugged, versatile, streamlined, and indeed pairs up very well with other tools.

    It would have been even nicer to see this come with more bits, as it only comes with six. The ratchet also has a rather low teeth count, and is a one-way, pass-through design, so users will have to get used to everything that comes with those.

    However, as with all high quality tools, the Victorinox ratchet is elegant, tough, it has some nice and useful features, it is versatile, and even if it does not last a lifetime, the Victorinox warranty will make sure that it does.

    Pros
    -Unlimited lifetime warranty.
    -Exceptional quality.
    -Pass-through design adds no length to bit clearance.
    -One-way ratchet head design adds to robustness.
    -Ultimate bit compatibility.
    -Pass-through design allows T-handle configuration with long extensions.

    Cons
    -Rather expensive.
    -Extension is not easy to find, either in a set or separately.
    -Lower teeth count than competition.
    -Comes with no case and only six bits.

    If you liked this ratchet, also check out:

    1 Reply Last reply
    0
    • m47mu74ntM
      m47mu74ntM
      m47mu74nt
      wrote on last edited by
      #56

      :hatsoff:
      Thank you a lot for this review, it showed some pros/cons I had not considered, I am very happy I helped you getting one :cheers:

      1 Reply Last reply
      0
      • ReamerPunchR
        ReamerPunchR
        ReamerPunch
        Global Moderators
        wrote on last edited by
        #57

        I've got the Prestacycle and Topeak reviews written. I'll find some time to take pictures and I'll post those two next. :cheers:

        1 Reply Last reply
        0
        • Adam5A
          Adam5A
          Adam5
          wrote on last edited by
          #58

          Thank you very much for the excellent qualitative reviews RP :tu: :tu: :like:

          Excellent work! :cheers:

          Now, if we could just get Todd Osgood to test them all out... 😄

          1 Reply Last reply
          0
          • ReamerPunchR
            ReamerPunchR
            ReamerPunch
            Global Moderators
            wrote on last edited by
            #59

            @Adam5 said:
            Thank you very much for the excellent qualitative reviews RP :tu: :tu: :like:

            Excellent work! :cheers:

            Now, if we could just get Todd Osgood to test them all out... 😄

            I suggested compact bit ratchets. I erally hope he gives this a go! :like:

            1 Reply Last reply
            0
            • ReamerPunchR
              ReamerPunchR
              ReamerPunch
              Global Moderators
              wrote on last edited by
              #60

              I'm seeing the same mini ratchets over and over again in Amazon. :think:
              If anyone has any suggestions, please let me know. :cheers:

              1 Reply Last reply
              0
              • ReamerPunchR
                ReamerPunchR
                ReamerPunch
                Global Moderators
                wrote on last edited by ReamerPunch
                #61

                Ratchets reviewed so far

                1 Reply Last reply
                0
                • ReamerPunchR
                  ReamerPunchR
                  ReamerPunch
                  Global Moderators
                  wrote on last edited by ReamerPunch
                  #62

                  Prestacycle Pro T-Handle Ratchet

                  Warranty: Lifetime
                  Weight
                  Ratchet: 55g
                  Extension: 33g
                  Set: 190g

                  Max torque rating: 60 Nm / 44 ft lb
                  Length: 114mm
                  Extension length: 100mm
                  Head width: 18mm
                  Head clearance with standard bit: 27mm (adds 2mm)
                  Teeth count: 60
                  Minimum swing arc: 6°
                  Bit retention: spring
                  Extension bit retention: magnet
                  In-line driver retention: magnet
                  Bit material: Chromium-Vanadium steel
                  Handle material: Chromium- Vanadium steel
                  Price: $40 with 12 bits, extension, and wallet
                  Bits: Torx 10/20/25/30, Phillips 1, Allen 2/2.5/3/4/5/6/8

                  Accessories
                  The Prestacycle Pro T-Handle Ratchet comes with twelve Chromium-Vanadium standard 1/4" bits, a long extension, and a nylon wallet to carry everything.
                  There are elasticated loops for everything. The wallet is single-stitched, with a double-stitched belt-loop. There is also a 65mm x 100mm flat pocket for additional items. The wallet has velcro closure. The wallet is a simple folding one, and bits could theoretically slip out of their loops and fall out if the wallet is shaken hard enough.

                  Dimensions
                  This is the longest edc ratchet so far. At 55g, it is still lightweight enough for an edc pouch, although to utilize the T-handle special feature, the extension will also be necessary, and this is another 33g. At 18mm, the head is still among the narrowest available, and helps keep the ratchet quite compact.

                  Teeth Count
                  The Prestacycle has 60 teeth. Quite high for such a narrow head, this allows a minimum arc swing of six degrees. This is almost as good as it gets with these small ratchets.

                  Bit Retention
                  The ratcheting end has a spring, which provides a firm detent on bits even for bits without retention notches.
                  The in-line driver socket and the extension have magnets. These are way too strong for short bits to be removed with fingers.

                  Bit compatibility
                  The ratchet head can be used with double ended bits, be they Leatherman or standard. Thanks to the ratcheting head being almost a pass-though one, pretty much every sort of double ended bit will work. Leatherman bits can be inserted so that the spring engages the side-notches, but can be pushed through if pressing hard enough. They can be inserted so that the small tooth marked with the red dot can prevent them from being pushed through, but the retention spring will not be engaging, so they will fall out from the front.
                  Stubby bits are easy enough to remove, thanks to the hole in the head. Push from the back to get the bit started.
                  Bits and extensions with a grooved neck will have a lot of play, although they will not fall out and can still be used.

                  The in-line driver and extension have strong magnets and are somewhat deep, so stubby bits cannot be removed with just fingers.
                  Leatherman bits can be kind of used, but they barely engage and will have too much play left and right.
                  Standard double-ended bits cannot be used for in-line driving or the extension. They do not engage and cannot be turned with the tool.

                  Switch action
                  The switch is quite small and has a strong detent. It cannot be operated with a fingertip, and will require a fingernail. The switch sits flat against the body, and does not protrude in any way.

                  Ease of use
                  The Prestacycle can exert a great amount of torque thanks to its length. It is easy to grip for people with large hands, as some edc ratchets can be a little too compact.
                  There is a knurled finger wheel, to quickly turn loose fasteners that do not have enough drag for the ratchet.
                  The in-line driver is also quite handy.
                  Thanks to the almost pass-through head, any double-ended bit can be used with the tool.

                  Examining the ratchet head hole and the extension a little closer reveals the namesake of this ratchet. The hole is a 1/4" hex, that has a single tooth in one corner, which is marked with a red dot on either side of the ratchet head. This corresponds with the seven-sided extension rod. The edge that matches the dotted corner is marked with a step and a dotted line. Assembling the T configuration employs the same principle as the shape sorter toy. The extension only fits through the ratchet in one orientation. Any other position, and the extension will just sit in the ratchet like any other extension in any other ratchet.

                  This does mean that only one corner of the ratcheting head pushes against a bit, so this should be taken into account when bearing down on a fastener.

                  The T-Handle configuration provides far more torque than the ratchet head could, and safely so. If that much torque were to be applied on the ratchet head itself, the teeth might get damaged.
                  As this ratchet's head is wider than the typical compact bit ratchet, with a stem to match, this ratchet is among the strongest of this design, able to withstand greater abuse. Do not be a hero, though. It is still a small ratchet, designed for the bicycle community. It does have a lifetime warranty that offers peace of mind should things go south.

                  Construction Quality
                  The Prestacycle is a high quality tool. The fit and finish is immaculate. The magnets are perfectly centered. The polished finish is crisp and consistent. Everything is nicely chamfered. The ratchet mechanism works flawlessly. The T-handle feature works beautifully and is very easy to configure. All bit sockets are funneled to aid bit insertion. The extension has retention notches at the tip, and in the middle, for the T-handle configuration.

                  Portability
                  The Prestacycle is still a thin and narrow design, but a little long. It will fit nicely in an edc pouch along with the extension. It could be persuaded to fit in the side-sleeve of a multi-tool pouch with the extension, but this will not be perfect. The larger than average opening in the back of the head allows for larger carabiners than other compact ratchets. It will still fit into a pen sleeve.

                  Value
                  The Prestacycle ratchet with the extension and nothing else is $30. This is a little steep, but it is still a decent deal, considering everything the ratchet has to offer. The soft case set, which consists of the above wallet and twelve bits is $40, which is quite good, and the hard case set is $50. There are enough options to choose from, should you decide to get this.

                  Conclusion
                  The Prestacycle is a contender for the best compact bit ratchet. It is nicely made, with a high teeth count, the ability to convert it into a fixed T-handle driver, a good assortment of bits, a carry case if you need one, and arguably most importantly, a lifetime warranty.

                  The most impressive thing of this ratchet is the lack of negative qualities, especially compared to other ratchets we have seen. The issue of the soft case not holding the bits perfectly securely can be solved by getting just the ratchet and extension, or using another case, or getting the hard case. Chromium-Vanadium is not a premium bit material, but they do the job. If it is not up to your standards, you could get just the ratchet and extension, and then supplement those with a premium bit set.

                  The only reason not to get this ratchet would be something very specific, like space limitations, since it is the longest yet. Or if 60 teeth are simply not enough for a very particular application. As it is, this is a phenomenal tool that is simply better than the rest.

                  Pros
                  -Lifetime warranty.
                  -High quality.
                  -High number of teeth.
                  -T-handle configuration allows for additional torque.
                  -Nigh pass-though head works with all double-ended bits.
                  -Better grip for people with large hands.
                  -Many purchase options to choose from.

                  Cons
                  -None.

                  If you liked this ratchet, also check out:

                  1 Reply Last reply
                  0
                  • magentusM
                    magentusM
                    magentus
                    Admin Team
                    wrote on last edited by
                    #63

                    Really enjoying this thread m'dude :like: Thanks for all your effort

                    1 Reply Last reply
                    0
                    • ReamerPunchR
                      ReamerPunchR
                      ReamerPunch
                      Global Moderators
                      wrote on last edited by
                      #64

                      Thanks. :cheers:

                      1 Reply Last reply
                      0
                      • ReamerPunchR
                        ReamerPunchR
                        ReamerPunch
                        Global Moderators
                        wrote on last edited by
                        #65

                        I've got two more reviews written. I'll find some time to take pictures and post them soon. :cheers:

                        1 Reply Last reply
                        0
                        • m47mu74ntM
                          m47mu74ntM
                          m47mu74nt
                          wrote on last edited by
                          #66

                          @ReamerPunch said:
                          I've got two more reviews written. I'll find some time to take pictures and post them soon. :cheers:

                          any updates? :pok:

                          :whistle:

                          1 Reply Last reply
                          0
                          • ReamerPunchR
                            ReamerPunchR
                            ReamerPunch
                            Global Moderators
                            wrote on last edited by
                            #67

                            I have five reviews written. Working on pictures now. I apologize for taking such a long break from this. Trying to keep up. But it turns out that I might not need surgery anymore. I'll have one posted today and the rest will follow. :salute:

                            1 Reply Last reply
                            0
                            • ReamerPunchR
                              ReamerPunchR
                              ReamerPunch
                              Global Moderators
                              wrote on last edited by ReamerPunch
                              #68

                              Topeak Ratchet Rocket Lite

                              (The ratchet can also be found branded by Blue Point, Granite, KS Tools, PowerTorque)

                              Warranty: 2 years (with original purchaser receipt)
                              Max torque rating: 30 nm / 22 ft lb
                              Weight: 29g
                              Set weight: 161g
                              Length: 93mm
                              Head width: 15mm
                              Head clearance with standard bit: 25.5mm (adds 0.5mm)
                              Teeth count: 52
                              Minimum swing arc: 7°
                              Bit retention: spring
                              Extension bit retention: magnet
                              In-line driver retention: magnet
                              Bit material: S2 Steel
                              Handle material: Chromium-Vanadium steel
                              Price: $31 with 11 bits, two tire levers, extension, nylon case
                              Bits: Allen 2/2.5/3/4/5/6/8, Phillips 2, Torx 10/15/25

                              Accessories
                              The Topeak Ratchet Rocket Lite DX comes with eleven S2 steel standard bits, an extension, two tire levers, and a nylon case to carry it all.
                              The bits, tire levers, and the extension sit in elasticated loops. The ratchet itself snaps into a plastic holder. There is a flat 40x50mm pocket for additional gear, and a very narrow elasticated loop that can hold something thin. The case has velcro closure. The stitching is single for the sides and double for the top of the belt loop. The belt loop has velcro on one side, to allow adding or removing the case on a belt without needing to take off a belt, and it can also be attached to a bike frame. The belt loop velcro does not overlap 100% when the belt loop rests flat. To get it to overlap completely the belt loop has to be loose.
                              This case does work, and although the ratchet will not come off its holder, the bits may slip out with enough movement.

                              Dimensions
                              The Topeak is absolutely minuscule. Only 93mm long, and with a 15mm wide head. It can fit in any edc pouch and will occupy very little real estate.

                              Teeth Count
                              The Topeak has 52 teeth, which equals to a 7 degree minimum swing arc. This, combined with the narrow head, allows the ratchet to reach places and turn fasteners other ratchets cannot.

                              Bit Retention
                              The ratchet head has a spring. This is very secure and holds bits firmly. It is in fact not easy to pull out bits that have retention notches. However, simply poking the bit from the back, through the hole of the ratchet head, pops the bit out of the spring, and it can then be removed very easily. This is an interesting feature, given that the Giant and PK Tools ratchets share the same head and spring design, but bits cannot be disengaged as easily by poking them from the back.

                              The in-line driving socket has a magnet that is quite strong, making stubby bits and bits with thin tips a little hard to remove. This is the same size magnet as the PK Tools ratchet. The Giant had a smaller magnet.

                              Bit compatibility
                              Stubby bits are not easy to remove from the in-line driving socket.
                              Standard double-sided bits and Leatherman bits can be used with the ratcheting head, as long as one end is thin enough to clear the hole in the back. Leatherman bits have to be inserted properly, with the spring engaging their retention notches.
                              Double-sided bits cannot be used in the in-line driver. They do not engage the sides, and thus cannot be turned.
                              Leatherman bits can be used, but they barely engage the sides and have a lot of play left and right.
                              Bits with the grooved neck do not engage the ratchet spring, so they will have a lot of play back and forth, but they do not fall out.

                              Bits with a more rounded back sit flush with the ratchet head, allowing the clearance to be whatever the bit length is.

                              Switch action
                              The action switch is ribbed, small, and with excellent detent. It does not wobble at all, it does not protrude enough to get caught on anything, and it will not be bumped accidentally, reversing the action.
                              The switch can be operated by just a fingertip, but a fingernail may be necessary, as the detent is quite strong and the switch itself quite small for it to be operated just by skin.

                              Ease of use
                              The switch can be operated quite easily with a fingernail; maybe not so easily with just a fingertip.
                              Stubby bits cannot be removed from the in-line driver easily.
                              Standard bits can be removed extremely easily, despite the ratchet having a strong spring.
                              The tool is small, with an extremely narrow head, and excellent head clearance with a bit inserted. The tool is still long enough and strong enough to perform well within the bicycle community.
                              The in-line driver is a much appreciated feature and works well. It would have been even better if the stem of the driver had some knurling, to provide traction.
                              The high teeth count and knurled finger wheel make things quick.
                              Both bit driver sockets are funneled to make bit insertion easier.
                              The spring keeps the bits in place, and also holds the ratchet mechanism in the head, so this can be disassembled if needed.

                              Construction Quality
                              The Topeak is a high quality tool, with excellent fit and finish. Machining, assembly, finish, tolerances, centering, everything is flawless on this. There are no issues with this ratchet. It is very well-made, and it shows.

                              The bit extension is not branded by Topeak, or anyone else, and it did not look new. There are scratches and dents all over it. This does not affect performance, but it looks rather out of place, next to a brand new and high quality ratchet and bits.

                              Topeak offers a two-year warranty for their tools. Obtaining warranty service requires the original sales receipt. This is not the best warranty out there. Having the receipt is not always possible, and the warranty is only for two years. Still, this is much more than most ratchets we have seen.

                              Portability
                              Sharing first place in the weight department with the PK Tools ratchet, at only 29 grams, the Topeak is microscopic, and will disappear in edc pouches. It will not even be noticeable until needed. Thanks to the thin stem and narrow head, it will sit comfortably in all sorts of pouches, containers, pockets, etc. Nice and streamlined, it is a winner as far as portability goes.

                              Value
                              At $31 US, this is a good deal. The ratchet is high quality, the bits are high quality and there are eleven of them, there is a bit extension included, there are two tire levers, and the case is quite good, holding the ratchet securely, and it even has an extra pocket. There are other ratchets of very similar design and dimensions that cost less, but they will not include all that this set does. Of course the two tire levers may be of little use to some, but even then, this ratchet set is worth the investment.

                              Conclusion
                              Arguably the most well-known edc ratchet, the Topeak is undoubtedly a big player and already the edc ratchet of many. No surprises here. It is of great quality, absolutely tiny, with a high teeth count considering how narrow the head is, it has a finger wheel, an in-line driving socket, great bit retention, and comes in a nice kit.

                              The best thing about the Topeak Ratchet Rocket is arguably its reliability. This is not a new tool. It has been around for many years, and it will definitely appear in any search for an edc, bike, compact, etc bit ratchet. It is a proven design, and is often the first recommendation for a compact ratchet kit for cyclists.

                              It should be obvious that I recommend this. The form factor and quality of these micro ratchets is pretty much the same, so getting this or the PK Tools ratchet, or the Giant ratchet, or the Granite, Liv, Smato, etc, will be a very similar experience. It will come down to price, the set they come in, and of course availability.

                              As it is, the Topeak is a great buy. You may not need the tire levers, but even then, they are useful on their own, or you could just gift them to a cyclist friend, and use the freed space for something else. The fact that bits can be removed so much more easily compared to ratchets that have the exact same head is also quite neat.

                              Pros
                              -Known to be reliable.
                              -Excellent fit and finish.
                              -Absolutely tiny.
                              -Knurled disk allows quick turning of loose fasteners with fingertips.
                              -Ratchet end compatible with many double-ended bits.
                              -Thin and narrow head combined with high teeth count can work in the tightest of places.
                              -Bits can be removed more easily compared to ratchets with the same head.

                              Cons
                              -Extension did not look new.
                              -Warranty is only 2 years, and requires original sales receipt.

                              If you liked this ratchet, also check out:

                              1 Reply Last reply
                              0
                              • m47mu74ntM
                                m47mu74ntM
                                m47mu74nt
                                wrote on last edited by
                                #69

                                :ahhh :ahhh :ahhh

                                1 Reply Last reply
                                0
                                • TaskyT
                                  TaskyT
                                  Tasky
                                  wrote on last edited by
                                  #70

                                  I have to say, I'm still scared of losing my Topeak bits... but I've had it twisting and bounding around in my pockets for quite some time now, and not once found a bit even out of place, let alone fallen out.
                                  My extension was (and remains) unmarred, too.

                                  1 Reply Last reply
                                  0
                                  • ReamerPunchR
                                    ReamerPunchR
                                    ReamerPunch
                                    Global Moderators
                                    wrote on last edited by ReamerPunch
                                    #71

                                    Prestacycle Review Edited

                                    Removed

                                    1 Reply Last reply
                                    0
                                    • ReamerPunchR
                                      ReamerPunchR
                                      ReamerPunch
                                      Global Moderators
                                      wrote on last edited by
                                      #72

                                      @ReamerPunch said:

                                      @ReamerPunch said:

                                      CyclingDeal Cigar Tool Kit ratchet

                                      Spoiler:

                                      (can also be found branded by JCool, OG Evkin, RockBros, and X-Tools)
                                      Weight: 52g
                                      Kit weight: 151g
                                      Length: 104mm
                                      Head width: 17mm
                                      Head clearance with standard bit: 30mm (adds 5mm)
                                      Teeth count: 72
                                      Minimum swing arc: 5°
                                      Bit retention: magnet
                                      In-line driver bit socket: yes
                                      In-line driver socket bit retention: magnet
                                      Bit material: S2 steel
                                      Handle material: Chrome Vanadium steel
                                      Price: $36 with 6 S2 steel impact bits, bit holder cylinder, aluminium container, and mounting bracket)

                                      Accessories
                                      This comes with six bits, a bit holder, a waterproof aluminium case, and a bracket to mount it on a bicycle frame.
                                      The bit holder resembles a revolver's cylinder and holds six standard bits. In the middle is a metal peg, held in by friction. This protrudes into the in-line driving socket, to allow the ratchet to hold onto it with the magnet.

                                      Dimensions
                                      This is the longest ratchet yet. The head is relatively narrow, and it is still short enough for an edc pouch. The stem is robust, lending to the tool's strength.

                                      Teeth Count
                                      The ratchet has 72 teeth, which is impressive for such a narrow head. This allows for a five degree swing arc which makes turning fasteners a quick process.

                                      Bit Retention
                                      The bits are held in place with magnets in both driving sockets. The magnets are strong, but both sockets are shallower than most, so stubby bits can still be removed easily.

                                      Bit compatibility
                                      Stubby bits are easy to remove, thanks to both bit sockets being shallower than usual. Neither standard double-ended bits nor Leatherman bits can be used with this. Both driving sockets are way too shallow for these long bits to engage and be able to turn.

                                      The bit holder cylinder holds the bits by friction. The bits that came in the set are held firmly, but some bits from other sets were loose in the holder, and will fall out the holder and bang around in the capsule.

                                      Switch action
                                      The switch is oversized, making it extremely easy to operate. It has a strong detent and does not protrude from the sides of the frame, so it will not get turned accidentally. It does protrude a bit at the top, and may catch on things during use.

                                      Ease of use
                                      The high teeth count allows for a low swing arc, making it quick to turn fasteners, even in limited space.
                                      There is a knurled finger wheel for quick work.
                                      The tool is long, providing excellent torque and grip.
                                      The switch is large, very easy to operate.
                                      The driver sockets are shallow, so even though the magnets are strong, bits can be removed with no issues.
                                      The ratcheting assembly is held in place with a plate and a Torx 6 screw, making it easy to disassemble for maintenance.

                                      Construction Quality
                                      This is a high quality tool. The finish is flawless. The ratcheting mechanism has a minuscule amount of wobble in the frame. It has a high teeth count in a narrow head, and the mechanism works beautifully. The bits are S2 steel and finished perfectly.
                                      The aluminium case has a screw-cap on each end. All parts are machined exceptionally well, making it waterproof.
                                      The ratchet sits on the magnetized bit holder, and the whole assembly fits in the tube perfectly and silently.

                                      Portability
                                      The aluminium capsule comes with a mounting bracket, and holds the ratchet and bits tightly. Still, there is a lot of unused space. The bit carrier could be longer, offering more bit positions, to make it more of an attractive option.
                                      The ratchet itself is on the larger side as far as mini ratchets go. It is still compact, and will still fit nicely in a pen slot or an edc pouch.

                                      Value
                                      A high quality item, this set costs a fair amount. It comes with high quality bits and a nice aluminium capsule.
                                      Still, for the price, it could have more bits, or at least a larger bit holder, to offer more bit storage. As it is, users will have to add bits as they see fit, since this comes with only six of them.

                                      Conclusion
                                      This is a very well-made tool. It has many nice features, and it comes with good quality bits and a good carrying option.
                                      Still, this is larger than the typical compact ratchet, it is fairly expensive, it comes with only six bits, and the included aluminium capsule leaves a lot of unused space. Because the ratcheting driver has a magnet, this adds 5mm of length to an inserted bit, compromising the head clearance.

                                      Some compact ratchets may be too compact for people with larger hands, so this may be perfect. It is longer, stronger, nicely made, and has a high teeth count, an in-line driver, a knurled finger wheel, and a nice container. It is easy to use and to disassemble. It also comes under many different brands, so it may be found for less.

                                      Pros
                                      -S2 steel impact bits.
                                      -Exceptional quality and finish.
                                      -Robust and long handle provides excellent torque.
                                      -Comes with high quality container and mounting bracket.
                                      -Very high teeth count in a narrow head.
                                      -Easy to disassemble.
                                      -Knurled disk allows quick turning of loose fasteners with fingertips.

                                      Cons
                                      -High price.
                                      -Heavier and bulkier than other options.
                                      -The aluminium capsule leaves a lot of wasted space.

                                      A couple of notes regarding this.
                                      There is a lot of unused space in the tube. I am going to get the amartisan screwdriver and see if I can modify the bitholders to fit in the ratchet tube. Of course, this increases the already high price of the CyclingDeal ratchet, but I would like to see if it can be done. And the ratcheting screwdriver is quite inexpensive.

                                      Also the Wiha and CyclingDeal ratchets have the exact same ratcheting head. But they are almost the same price, and the Wiha has a ton more bits. But no in-line driver. I do think the Wiha is a better deal, but I already have that ratchet head, so I do not know if I will bother getting it. From what I have seen in the CyclingDeal ratchet, that particular ratchet head is fine. 72 teeth, and the switch is easy to operate. But the head adds a lot of length to a bit, and the switch is a little too big.

                                      I have received the Amartisan screwdriver. The bit cylinders are a little smaller in diameter compared to the CyclingDeal ratchet bit cylinder. It does seem possible to trim the centers and make them fit in the CyclingDeal tube. The thing is, these Amartisan cylinders are very cheap. After removing a few bits only once, they no longer fit tightly in their spots. Plus getting them adds to the already high price of the CyclindDeal ratchet. So this is not recommended.

                                      1 Reply Last reply
                                      0
                                      • GearedForwardsG
                                        GearedForwardsG
                                        GearedForwards
                                        wrote on last edited by
                                        #73

                                        @ReamerPunch said:
                                        Prestacycle Review Edited

                                        Spoiler:

                                        Prestacycle Pro T-Handle Ratchet

                                        Weight
                                        Ratchet: 55g
                                        Extension: 33g
                                        Set: 190g

                                        Length: 114mm
                                        Extension length: 100mm
                                        Head width: 18mm
                                        Head clearance with standard bit: 28mm (adds 3mm)
                                        Teeth count: 60
                                        Minimum swing arc: 6°
                                        Bit retention: spring detent
                                        Extension bit retention: magnet
                                        In-line driver bit socket: yes
                                        In-line driver socket bit retention: magnet
                                        Bit material: Chrome Vanadium steel
                                        Handle material: Chrome Vanadium steel
                                        Price: $40 with 12 bits and extension
                                        Bits: Torx 10/20/25/30, Phillips 1, Allen 2/2.5/3/4/5/6/8

                                        Accessories
                                        The Prestacycle Pro T-Handle Ratchet comes with twelve Chrome-Vanadium standard 1/4" bits, a long extension, and a nylon wallet to carry everything.
                                        There are elasticated loops for everything. The wallet is single-stitched, with a double-stitched belt-loop. There is also a 65mm x 100mm flat pocket for additional items. The wallet has velcro closure. The wallet is a simple folding one, and bits may slip out of their loops and fall out of the wallet is shaken hard enough.

                                        Dimensions
                                        This is the longest edc ratchet so far. At 55g, it is still lightweight enough for an edc pouch, although to utilize the T-handle special feature, the extension will also be necessary, and this is another 33g. Not the best option for lightweight back-packing, but quite capable. At 18mm, the head is still among the narrowest available, and helps keep the ratchet quite compact.

                                        Teeth Count
                                        The Prestacycle has 60 teeth. Quite high for such a narrow head, this allows a minimum arc swing of six degrees. This is almost as good as it gets with these small ratchets.

                                        Bit Retention
                                        The ratcheting end has a spring, which provides a firm detent on bits even for bits without retention notches.
                                        The in-line driver socket and the extension have magnets. These are way too strong for short bits to be removed with fingers.

                                        Bit compatibility
                                        The ratchet head can be used with double ended bits, be they Leatherman or standard. Thanks to the ratcheting head being almost a pass-though one, pretty much every sort of double ended bit will work. Leatherman bits can be inserted so that the spring engages the side-notches, but can be pushed through if pressing hard enough. They can be inserted so that the small tooth marked with the red dot can prevent them from being pushed through, but the retention spring will not be engaging, so they will fall out from the front.
                                        Stubby bits are easy enough to remove, thanks to the hole in the head. Push from the back to get the bit started.
                                        Bits and extensions with a grooved neck will have a lot of play, although they will not fall out and can still be used.

                                        The in-line driver and extension have strong magnets and are somewhat deep, so stubby bits cannot be removed with just fingers.
                                        Leatherman bits can be kind of used, but they barely engage and will have too much play left and right.
                                        Standard double-ended bits cannot be used for in-line driving or the extension. They do not engage and cannot be turned with the tool.

                                        Switch action
                                        The switch is quite small and has a strong detent. It cannot be operated with a fingertip, and will require a fingernail. The switch sits flat against the body, and does not protrude in any way.

                                        Ease of use
                                        The Prestacycle can exert a great amount of torque thanks to its length. It is easy to grip for people with large hands, as some edc ratchets can be a little too compact.
                                        There is a knurled finger wheel, to quickly turn loose fasteners that do not have enough drag for the ratchet.
                                        The in-line driver is also quite handy.
                                        Thanks to the almost pass-through head, any double-ended bit can be used with the tool.

                                        Examining the ratchet head hole and the extension a little closer reveals the namesake of this ratchet. The hole is a 1/4" hex, that has a single tooth in one corner, which is marked with a red dot on either side of the ratchet head. This corresponds with the seven-sided extension rod. The edge that matches the dotted corner is marked with a step and a dotted line. Assembling the T configuration employs the same principle as the shape sorter toy. The extension only fits through the ratchet in one orientation. Any other position, and the extension will just sit in the ratchet like any other extension in any other ratchet.

                                        This does mean that only one corner of the ratcheting head pushes against a bit, so this should be taken into account when bearing down on a fastener.

                                        The T-Handle configuration provides far more torque than the ratchet head could, and safely so. If that much torque were to be applied on the ratchet head itself, the teeth might get damaged.
                                        As this ratchet's head is wider than the typical compact bit ratchet, with a stem to match, this ratchet is among the strongest of this design, able to withstand greater abuse. Do not be a hero, though. It is still a small ratchet, designed for the bicycle community.

                                        Construction Quality
                                        The Prestacycle is a high quality tool. The fit and finish is immaculate. The magnets are perfectly centered. The polished finish is crisp and consistent. Everything is nicely chamfered. The ratchet mechanism works flawlessly. The T-handle feature works beautifully and is very easy to configure. All bit sockets are funneled to aid bit insertion. The extension has retention notches at the tip, and in the middle, for the T-handle configuration.

                                        Portability
                                        The Prestacycle is still a thin and narrow design, but a little long. It will fit nicely in an edc pouch along with the extension. It could be persuaded to fit in the side-sleeve of a multi-tool pouch with the extension, but this will not be perfect. The larger than average opening in the back of the head allows for larger carabiners than other compact ratchets. It will still fit into a pen sleeve.

                                        Value
                                        The Prestacycle ratchet with the extension and nothing else is $30. This is a little steep, but it is still a decent deal, considering everything the ratchet has to offer. The soft case set, which consists of the above wallet and twelve bits is $40, which is quite good, and the hard case set is $50. There are enough options to choose from, should you decide to get this.

                                        Conclusion
                                        The Prestacycle is a contender for the best compact bit ratchet. It is nicely made, with a high teeth count, the ability to convert it into a fixed T-handle driver, a good assortment of bits, and a carry case if you need one.

                                        The most impressive thing of this ratchet is the lack of negative qualities, especially compared to other ratchets we have seen. The issue of the soft case not holding the bits perfectly securely can be solved by getting just the ratchet and extension, or using another case, or getting the hard case. Chrome Vanadium is not a premium bit material, but they do the job. If it is not up to your standards, you could get just the ratchet and extension, and then supplement those with a premium bit set.

                                        The only reason not to get this ratchet would be something very specific, like space limitations, since it is the longest yet. Or if 60 teeth are simply not enough for a very particular application. As it is, this is a phenomenal tool that is simply better than the rest.

                                        Pros
                                        -High quality.
                                        -High number of teeth.
                                        -T-handle configuration allows for additional torque.
                                        -Nigh pass-though head works with all double-ended bits.
                                        -Better grip for people with large hands.
                                        -Many purchase options to choose from.

                                        Cons
                                        -The soft case does not hold bits securely enough.
                                        -Bits are only Chrome Vanadium.

                                        Given the choice between this and the Topeak, all things considered, which do you choose?

                                        1 Reply Last reply
                                        0
                                        • ReamerPunchR
                                          ReamerPunchR
                                          ReamerPunch
                                          Global Moderators
                                          wrote on last edited by ReamerPunch
                                          #74

                                          GreaTalent Ratchet Set

                                          (The ratchet can also be found branded by Dofedofo, Fastors, HGHD Tools, Mucoos, Steinwhale)

                                          Weight: 55g
                                          Kit Weight: 283g
                                          Length: 110mm
                                          Head width: 19mm
                                          Head clearance with standard bit: 30mm (adds 5mm)
                                          Teeth count: 36
                                          Minimum swing arc: 10°
                                          Bit retention: magnet
                                          In-line driver retention: magnet
                                          Bit material: S2 steel
                                          Handle material: Chromium-Vanadium steel and plastic
                                          Price: $17 with 36 bits and case (also available for $13 with 24 bits and no case)
                                          Bits:
                                          Phillips: 0, 2x 1, 2x 2, 3
                                          Pozidrive: 0, 1, 2, 3
                                          Slotted: 3, 5
                                          Allen SAE: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4
                                          Allen Metric: 2, 2.5, 3, 4, 5, 6
                                          Robertson: 1, 2, 3
                                          Torx Tamperproof: 8, 9, 10, 15, 20, 25, 27, 30, 40

                                          Accessories
                                          The GreaTalent comes with 36 standard 1/4" S2 steel bits, and a simple plastic case lined with foam. Below each bit there is the corresponding bit specification, to allow easy identification. The text is black, against the black background, so these are not that easy to read. The bits are arranged in a 4x9 grid, and are spaced. They are easy to remove from the case, although this means that there is quite a lot of unused space in the case.

                                          Dimensions
                                          The ratchet is 110mm, certainly on the longer side of edc ratchets. It is also 55g, despite most of it being made out of plastic. This is the same weight as the Prestacycle ratchet, but bulkier and with fewer features. The Ares, which is much shorter than this, is 58g, just 3g heavier but it has more to offer as a ratchet. The CyclingDeal ratchet is 52g, so even lighter and also offers more.

                                          The plastic in-line driver socket hurts the tool. It is made out of plastic, and it is quite bulbous, ruining what would have been a streamlined design. Also, it is made out of plastic, with the casting line very visible along the sides. This should be relegated to lightweight use, because it will not survive much more.

                                          Teeth Count
                                          The GreaTalent ratchet has 36 teeth. This is quite low. The minimum swing arc to engage the next tooth and turn a fastener is ten degrees. This may be too much in certain situations. The upside is that the teeth are exposed and quite large. This allows easier maintenance.

                                          Bit Retention
                                          The bits on both driving sockets are held in by magnets. The ratchet head magnet is quite strong, so bits with thin ends and stubby bits are not easy to remove. The in-line socket driver magnet is rather weak.

                                          Bit compatibility
                                          Stubby bits are difficult to remove because the ratchet magnet is too strong and the in-line driver is too deep.
                                          Double ended bits cannot be used in the ratcheting end. It is too shallow for them to engage and be turned.
                                          Leatherman bits brely engage in the in-line driver and have a lot of play side to side.

                                          Switch action
                                          The GreaTalent has an oversized and exposed spring-loaded pawl that acts as its own switch. Pushing it to engage in the left or right position comes with a confident click. The detent is quite good. It does not change positions by simply being bumped.

                                          Ease of use
                                          The GreaTalent has an exposed gear wheel and can be used as a finger wheel for more speed on a somewhat loose fastener. The pawl has a good detent and does not change positions accidentally. The tool is long, offering a good grip and decent amounts of torque. The in-line bit driver has always been a welcome addition, but in this instance, perhaps less so. It is integrated into the plastic of the body, and to make up for it, it is quite bulbous. It may not fit in deep, confined spots, and even if it does, it is plastic, so it may give before the fastener does.

                                          Construction Quality
                                          As part of an inexpensive kit, the ratchet is not the best ever made. It is unbranded, bulky, clunky, and covered in imperfections. There are casting marks, heat treatment marks, dents, scratches, and gaps all over it. It has developed pitting in just a few weeks as well. It almost looks out of place in its nice, crisp case, with the shiny, new S2 bits.

                                          The body consists of two metal plates that sandwich a plastic filler. Not the most robust approach we've seen. Structural integrity relies heavily on the plastic filler piece. This extends beyond the metal plates, to form the in-line bit driving socket. This is a first so far, and preferably the last. It is undoubtedly the weakest in-line driver yet.

                                          Portability
                                          This is the widest ratchet so far, as the in-line driver is quite thick and wide. It sits comfortably in its case, although this is a prerequisite, so it does not count. It will fit in an edc pouch, but will take the most space out of all ratchets we have seen. It does not fit in pen sleeves, and it will stretch out multi-tool case side-sleeves.
                                          Still, as far as bit ratchet kits, the case is not overly bulky. It will easily fit in a pocket, bag, toolbox, etc.

                                          Value
                                          At $17, this is not a terrible purchase. There are 36 S2 steel bits, a ratchet that works, and a decent case to store it all.

                                          Conclusion
                                          This shares its construction and ratchet head with the Jackly key-chain ratchet. The main body is also very reminiscent of the Mulwark and Neiko ratchets. The GreaTalent offers a few more features. The gear wheel acts as a finger wheel. It has an in-line driver. It has 36 teeth compared to the 16 of the Mulwark. It comes with 36 S2 steel bits and a case for $17, compared to the Mulwark which costs $16 for 19 Chromium-Vanadium bits and no case. There is some undeniable value to this set.

                                          Of course, there are some issues. The teeth count is still low. The tool is heavier than it needs to be. Its structural integrity relies on plastic. It is crudely made. The in-line bit driving socket is entirely made out of plastic. It is thick and wide for edc. The case leaves too much unused space.

                                          This is a nice kit with an average ratchet. It is quite inexpensive, and it comes with 36 S2 bits, including 9 Tamperproof Torx, and both SAE and Metric Allen bits. This is the main selling point. The ratchet is secondary, and rightly so. It works as part of this kit. As far as edc is concerned, there are much better options out there. If you are looking for a decent kit for around the house, this may be all you need. If you are looking for a micro ratchet for your Maxpedition or Leatherman case, you will be better off looking elsewhere.


                                          Jackly key-chain ratchet, GreaTalent, Mulwark

                                          Pros
                                          -36 standard S2 steel bits, including 9 Tamperproof Torx, and both SAE and Metric Allen bits.
                                          -Geared wheel is exposed, able to be used as a finger wheel.

                                          Cons
                                          -In-line bit socket is plastic and bulbous.
                                          -Half the ratchet is made of plastic.
                                          -Average fit and finish on the ratchet.
                                          -Only 36 teeth.
                                          -Case leaves a lot of unused space.

                                          If you liked this ratchet, to each their own. Also check out:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World