EDC Bit Ratchets
-
@AndreaW said:
Here is a mini ratchet from 711L (they make bicycle tools).Link removed
[attach id=1 msg=2459342]That is super cool! Unfortunately like most of these
- There's no knurling
- The end-bit holder is too shallow for double sided bits
Would be just about perfect for a little keychain EDC driver if it was just a little deeper like the leatherman bit extension, then you could use regular bits, leatherman bits or wiha like double ended bits like you can on the ratchet end. I'm going to order some of these stubby double sided bits from amazon and see if they're short enough to work with it...
[attach id=0 msg=2459342]


-
I was looking for one yesterday, nearly pulled the trigger on the engineer stubby ratchet DR54
What's the id for the one on your picture?
-
What an awesome thread! I put together a miniature tool set, knifeless, fits in a non-elastic mag pouch, Vic Card scissors missing from the picture. Should be flight safe according to our national carrier which I use and who allows scissors up to 6cm. The ratchet is the smallest I've found. Wouldn't bet my life on it, but the extender works as a bitholder/driver on its own and Knipex can be used to turn it if force is needed.

-
here is a pretty limited one - it is a kit for removing the doors from a Jeep. I guess I could drop in or replace bits with something more common. It has a belt loop on the back if I need to carry it


-
Very nice!
-
@m47mu74nt said:
I was looking for one yesterday, nearly pulled the trigger on the engineer stubby ratchet DR54What's the id for the one on your picture?
I did pull the trigger on the DR54, and on cheapos, will see
-
Update: The Steinwhale bits fit perfectly, like it was made for it. Now it's easy to keep a flat head and phillips on the tool even while it's on your keychain. Kinda wish they included security torx in the set, but I'll take what I can get!

From top to bottom: Steinwhale, Wiha, Klein, leatherman

Ironically, although the Wiha double ended bit is shorter than the Klein overall, the shortness is in the middle, not the ends, and is actually just a hair longer than the Klein on the ends.
This means sometimes a bit extension can use the Klein but not the Wiha despite the wiha being shorter. For example, both ratchets can use any of these bits in the ratcheting portion, but the longer ratchet cannot grab the Wiha bit on the end (and barely grabs the klein, almost enough to not be usable in regular practice but would work in a pinch). The shorter ratchet cannot grab either the Wiha or the Klein. Both can use the leatherman flat bits, but they wobble a lot.
An ideal 2nd Generation version of these ratchets would have knurling and a deeper well on the end, like the leatherman extension, with a combo of magnet and wire retention. This would provide redundancy in case one retention method fails, and can use all bits, even the Steinwhale (though you will need assistance removing it).
-
@Blunt Object said:
What an awesome thread! I put together a miniature tool set, knifeless, fits in a non-elastic mag pouch, Vic Card scissors missing from the picture. Should be flight safe according to our national carrier which I use and who allows scissors up to 6cm. The ratchet is the smallest I've found. Wouldn't bet my life on it, but the extender works as a bitholder/driver on its own and Knipex can be used to turn it if force is needed.Great kit!

-
@refleks said:
Update: The Steinwhale bits fit perfectly, like it was made for it. Now it's easy to keep a flat head and phillips on the tool even while it's on your keychain. Kinda wish they included security torx in the set, but I'll take what I can get!
From top to bottom: Steinwhale, Wiha, Klein, leatherman

Ironically, although the Wiha double ended bit is shorter than the Klein overall, the shortness is in the middle, not the ends, and is actually just a hair longer than the Klein on the ends.
This means sometimes a bit extension can use the Klein but not the Wiha despite the wiha being shorter. For example, both ratchets can use any of these bits in the ratcheting portion, but the longer ratchet cannot grab the Wiha bit on the end (and barely grabs the klein, almost enough to not be usable in regular practice but would work in a pinch). The shorter ratchet cannot grab either the Wiha or the Klein. Both can use the leatherman flat bits, but they wobble a lot.
An ideal 2nd Generation version of these ratchets would have knurling and a deeper well on the end, like the leatherman extension, with a combo of magnet and wire retention. This would provide redundancy in case one retention method fails, and can use all bits, even the Steinwhale (though you will need assistance removing it).
Those bits are handy indeed.

It's a shame that the people who sell ratchets don't put that much thought into what would fit the best in their tools. -
Just an FYI, I'm still around, but my laptop and phone started dying at the same time. I'm looking into solutions, but may end up just getting a new one.
I hope to start making reviews again soon.
-
@m47mu74nt said:
I did pull the trigger on the DR54, and on cheapos, will seeCheapos were just some kind of stubby 1/4 hex and square drivers without anything fancy, might have a use for them I'll see.
Still waiting for the DR54 though -
@ReamerPunch said:
Just an FYI, I'm still around, but my laptop and phone started dying at the same time. I'm looking into solutions, but may end up just getting a new one.
I hope to start making reviews again soon.
Don't worry, we'll wait for you

-
Hopefully I'll soon be able to contribute with a review of the Bosh ratchet from the 2607017160 set
-
That's the one I have. Works fine!
-
Cheap from Harbor Freight at $2.99. PITTSBURGH - Ratcheting Right Angle Multi-Bit Screwdriver Set, 8 Piece. SKU #92630


I got one, works fine for my needs. Not very refined, not real heavy duty either, but gets the job done for what I need it for.
Mike
*Note: Not my pictures, linked from HF. -
-
So much news on this topic....
The tiny 711L ratchet is much cheaper now.
I got it for $29 USD, now it's $20.
Or a set with 8 bits for $24.And there is a 4mm bit micro ratchet! :ahhh
LaBear has a folding bit ratchet, with bit set.
I hated the flat LaBear ratchet but this looks quite ok.
Four colours too.



-
Prestacycle sells the T-handle Pro for $23 with the extension and 12 bits. This (plus wallet) was $40. Ratchet and extension alone were $30.
I think it's the same one, but it may be a slightly shorter version?
Still, great value.
-
I saw this ratchet thing. Pass-through design, so not everyone will like it. No bit retention from what I read. Still, inexpensive, and holds two bits, and has a glass-breaker tip. Looks funky, too.

-
Also, I saw a Milwaukee bit ratchet that looks like the Klein one, but the Milwaukee one has a carabiner in the finger loop. Not bad. Not available in Amazon. Might be a local US deal. It even comes with the same bits as the Klein, but the bit holder is set-up for edc too.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
















































